The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Sulfur-encapsulated in heteroatom-doped hierarchical porous carbon derived from goat hair for high performance lithium–sulfur batteries
Abstract
Abstract Biomass-derived carbon materials have aroused widespread concern as host material of sulfur to enhance electrochemical performances for lithium–sulfur batteries. Herein, goat hair, as a low-cost and eco-friendly precursor, is employed to fabricate cauliflower-like in-situ nitrogen, oxygen and phosphorus tri-doped porous biomass carbon (NOPC) by a facile activation with H3PO4 and carbonization process. The morphology and microstructure of NOPC can be readily tuned by altering pyrolysis temperature. The as-prepared NOPC matrix material carbonized at 600 °C possesses 3D hierarchical porous structure, high specific surface area (535.352 m2 g−1), and appropriate pore size and pore size distribution. Encapsulating sulfur into the NOPC depends on a stem-melting technology as cathode materials of Li–S batteries. Due to the synergistic effect of special physical structure and inherent tri-doping of N, O and P, electrons and ions transfer and utilization of active sulfur in the materials are improved, and the shuttle behaviors of soluble lithium polysulfides are also mitigated. Consequently, the S/NOPC-600 composite exhibits excellent electrochemical performance, giving a high initial discharge capacity of 1185 mA h g−1 at 0.05 C and maintaining a relatively considerable capacity of 489 mA h g−1 at 0.2 C after 300 cycles. Our work shows that a promising candidate for cathode material of Li–S batteries can be synthesized using low-cost and renewable biomass materials by a facile process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microporous carbon nanosheets derived from corncobs for lithium–sulfur batteries
Guo, J., Zhang, J., Jiang, F., Zhao, S., Su, Q., & Du, G. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.077 · Cited by 175
Cited by
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Biomass‐Derived Carbon Materials: Controllable Preparation and Versatile Applications
Wang, Y., Zhang, M., Shen, X., Wang, H., Wang, H., Xia, K., Yin, Z., & Zhang, Y. (2021) · Small · doi:10.1002/smll.202008079 · Cited by 324
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253
Bi, L., Li, X., Liu, X., Zheng, Q., & Lin, D. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06385 · Cited by 105
Self-citation
Metadata
- Authors
- Ren, J., Zhou, Y., Wu, H., Xie, F., Xu, C., & Lin, D.
- Venue
- Journal of Energy Chemistry
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 30
- Pages
- 121-131
- ISSN
- 2095-4956 (ISSN-L)
- OpenAlex
- W2794414077
- Cited by
- 168
- References
- 1
- FWCI
- 8.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.