The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Adsorptive performance of MOF nanocomposite for methylene blue and malachite green dyes: Kinetics, isotherm and mechanism
Abstract
In the present study, Fe3O4@AMCA-MIL-53(Al) nanocomposite was utilized for the adsorptive removal of highly toxic MB and MG dyes from aqueous environment. The batch adsorption tests were performed at different contact time, pH, Fe3O4@AMCA-MIL-53(Al) dose, initial concentration of dyes and temperature. The maximum adsorption capacity of MB and MG dyes onto of Fe3O4@AMCA-MIL-53(Al) using Langmuir equation was 1.02 and 0.90 m mol/g, respectively. The isotherm and kinetic studies revealed that adsorption data were well fitted to Langmuir isotherm and pseudo-first-order kinetics models. Various thermodynamic parameters were also calculated and interpreted. The positive and negative values of ΔH° and ΔG° indicated that the adsorption was endothermic and spontaneous, respectively. The adsorptive binding of MB and MG on Fe3O4@AMCA-MIL53(Al) nanocomposite was directed by carboxylate and amide groups through electrostatic interaction, π-π interaction and hydrogen bonding. The desorption of both dyes from Fe3O4@AMCA-MIL-53(Al) was also performed using mixed solution of 0.01 M HCl/ethanol. Thus, we conclude that the Fe3O4@AMCA-MIL-53(Al) was an outstanding material for the removal of dyes from aqueous environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Über die adsorption in lösungen
Freundlich, H. (1907) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-1907-5723 · Cited by 9,001
Tran, H. N., You, S.-J., Hosseini-Bandegharaei, A., & Chao, H.-P. (2017) · Water Research · doi:10.1016/j.watres.2017.04.014 · Cited by 2,902
Cationic and anionic dye adsorption by agricultural solid wastes: A comprehensive review
Salleh, M. A. M., Mahmoud, D. K., Karim, W. A. W. A., & Idris, A. (2011) · Desalination · doi:10.1016/j.desal.2011.07.019 · Cited by 1,916
Magnetic nanoparticles: Essential factors for sustainable environmental applications
Tang, S. C. N., & Lo, I. M. C. (2013) · Water Research · doi:10.1016/j.watres.2013.02.039 · Cited by 891
Biodegradation of Synthetic Dyes—A Review
Ali, H. (2010) · Water, Air, & Soil Pollution · doi:10.1007/s11270-010-0382-4 · Cited by 817
Amino-based metal-organic frameworks as stable, highly active basic catalysts
GASCON, J., AKTAY, U., HERNANDEZALONSO, M., VANKLINK, G., & KAPTEIJN, F. (2009) · Journal of Catalysis · doi:10.1016/j.jcat.2008.11.010 · Cited by 667
Ke, F., Qiu, L.-G., Yuan, Y.-P., Peng, F.-M., Jiang, X., Xie, A.-J., Shen, Y.-H., & Zhu, J.-F. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.08.069 · Cited by 551
Alqadami, A. A., Naushad, M., Alothman, Z. A., & Ghfar, A. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10768 · Cited by 550
Self-citationChemical oxidation of methylene blue using a Fenton-like reaction
Dutta, K., Mukhopadhyay, S., Bhattacharjee, S., & Chaudhuri, B. (2001) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(01)00202-3 · Cited by 516
Hydrogen Storage in Metal-Organic Frameworks: A Review
Langmi, H. W., Ren, J., North, B., Mathe, M., & Bessarabov, D. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.10.190 · Cited by 461
Bayramoğlu, G., Altıntaş, B., & Arica, M. Y. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.04.051 · Cited by 400
Haque, E., Lo, V., Minett, A. I., Harris, A. T., & Church, T. L. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13589f · Cited by 399
Dye adsorption by resins: Effect of ionic strength on hydrophobic and electrostatic interactions
Hu, Y., Guo, T., Ye, X., Li, Q., Guo, M., Liu, H., & Wu, Z. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.116 · Cited by 396
Modified bentonite adsorption of organic pollutants of dye wastewater
Huang, Z., Li, Y., Chen, W., Shi, J., Zhang, N., Wang, X., Li, Z., Gao, L., & Zhang, Y. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.09.028 · Cited by 392
Padmavathy, K. S., Madhu, G., & Haseena, P. V. (2016) · Procedia Technology · doi:10.1016/j.protcy.2016.05.127 · Cited by 369
Li, C., Xiong, Z., Zhang, J., & Wu, C. (2015) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.5b00692 · Cited by 354
Siddiqui, S. I., & Chaudhry, S. A. (2017) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2017.08.009 · Cited by 329
Applications of magnetic metal–organic framework composites
Ricco, R., Malfatti, L., Takahashi, M., Hill, A. J., & Falcaro, P. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13140h · Cited by 316
Alqadami, A. A., Naushad, M., Abdalla, M. A., Ahamad, T., Abdullah ALOthman, Z., Alshehri, S. M., & Ghfar, A. A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.085 · Cited by 315
Self-citationCoagulation and flocculation of dye-containing solutions using a biopolymer (Chitosan)
Guibal, E., & Roussy, J. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2006.08.008 · Cited by 311
Zhang, S., Zeng, M., Li, J., Li, J., Xu, J., & Wang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14604a · Cited by 285
Alqadami, A. A., Naushad, M., Abdalla, M. A., Khan, M. R., & Alothman, Z. A. (2016) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.6b00446 · Cited by 272
Self-citationRemoval of anionic reactive dyes from water using anion exchange membranes as adsorbers
LIU, C., WU, J., CHIU, H., SUEN, S., & CHU, K. (2007) · Water Research · doi:10.1016/j.watres.2007.01.023 · Cited by 269
Attallah, O. A., Al-Ghobashy, M. A., Nebsen, M., & Salem, M. Y. (2016) · RSC Advances · doi:10.1039/c5ra23452b · Cited by 243
Pathania, D., Gupta, D., Al-Muhtaseb, A. H., Sharma, G., Kumar, A., Naushad, M., Ahamad, T., & Alshehri, S. M. (2016) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2016.06.019 · Cited by 236
Self-citationNaushad, M., Abdullah ALOthman, Z., Rabiul Awual, M., Alfadul, S. M., & Ahamad, T. (2016) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1060169 · Cited by 225
Self-citationSangon, S., Hunt, A. J., Attard, T. M., Mengchang, P., Ngernyen, Y., & Supanchaiyamat, N. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.210 · Cited by 223
Shao, Y., Zhou, L., Bao, C., Ma, J., Liu, M., & Wang, F. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.051 · Cited by 218
Luo, X., Ding, L., & Luo, J. (2015) · Journal of Chemical & Engineering Data · doi:10.1021/je501115m · Cited by 218
Morris, W., Doonan, C. J., & Yaghi, O. M. (2011) · Inorganic Chemistry · doi:10.1021/ic200744y · Cited by 212
Abbasi, A. R., Akhbari, K., & Morsali, A. (2012) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2011.11.016 · Cited by 211
Seoane, B., Téllez, C., Coronas, J., & Staudt, C. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.03.034 · Cited by 202
de Souza, T. N. V., de Carvalho, S. M. L., Vieira, M. G. A., da Silva, M. G. C., & Brasil, D. D. S. B. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.04.087 · Cited by 197
Silva, T. L., Cazetta, A. L., Souza, P. S. C., Zhang, T., Asefa, T., & Almeida, V. C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.034 · Cited by 195
TiO2–UV photocatalytic oxidation of Reactive Yellow 14: Effect of operational parameters
MURUGANANDHAM, M., & SWAMINATHAN, M. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.11.022 · Cited by 194
Jin, L., Zhao, X., Qian, X., & Dong, M. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.002 · Cited by 190
Naushad, M., & ALOthman, Z. A. (2015) · Desalination and Water Treatment · doi:10.1080/19443994.2013.862744 · Cited by 189
Self-citationEfficient removal of cationic dyes from aqueous solution by polymer-modified magnetic nanoparticles
Ge, F., Ye, H., Li, M.-M., & Zhao, B.-X. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.074 · Cited by 183
Naushad, M., Sharma, G., Kumar, A., Sharma, S., Ghfar, A. A., Bhatnagar, A., Stadler, F. J., & Khan, M. R. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.07.169 · Cited by 143
Self-citationMixtures of synthetic organic dyes in a photoelectrochemical cell
Wróbel, D., Boguta, A., & Ion, R. (2001) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/s1010-6030(00)00377-4 · Cited by 131
Wastewater control and management in a leather tanning district
Kabdaşlı, I., Tünay, O., & Orhon, D. (1999) · Water Science & Technology · doi:10.1016/s0273-1223(99)00393-5 · Cited by 118
Simulation of dye adsorption by beech sawdust as affected by pH
Batzias, F. A., & Sidiras, D. K. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.07.033 · Cited by 115
Alqadami, A. A., Naushad, M., Abdalla, M. A., Ahamad, T., ALOthman, Z. A., & Alshehri, S. M. (2016) · RSC Advances · doi:10.1039/c5ra27525c · Cited by 112
Self-citationUreasil Gels as a Highly Efficient Adsorbent for Water Purification
Bekiari, V., & Lianos, P. (2006) · Chemistry of Materials · doi:10.1021/cm060215t · Cited by 88
Xin, S., Yang, N., Gao, F., Zhao, J., Li, L., & Teng, C. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.109 · Cited by 79
Albadarin, A. B., Charara, M., Tarboush, B. J. A., Ahmad, M. N., Kurniawan, T. A., Naushad, M., Walker, G., & Mangwandi, C. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.07.045 · Cited by 79
Self-citationYang, C., Li, L., Shi, J., Long, C., & Li, A. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.11.011 · Cited by 71
Wastewater control and management in a leather tanning district
Kabdaşlı, I., Tünay, O., & Orhon, D. (1999) · Water Science & Technology · doi:10.2166/wst.1999.0055 · Cited by 70
Adsorption equilibrium of carbon dioxide and nitrogen on the MIL-53(Al) metal organic framework
Camacho, B. C. R., Ribeiro, R. P. P. L., Esteves, I. A. A. C., & Mota, J. P. B. (2014) · Separation and Purification Technology · doi:10.1016/j.seppur.2014.11.040 · Cited by 66
Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents
Lisi, R. D., Lazzara, G., Milioto, S., & Muratore, N. (2007) · Chemosphere · doi:10.1016/j.chemosphere.2007.06.008 · Cited by 54
Cited by
Metal–Organic Frameworks for the Removal of Emerging Organic Contaminants in Water
Rojas, S., & Horcajada, P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00797 · Cited by 1,101
Naushad, M., Alqadami, A. A., AlOthman, Z. A., Alsohaimi, I. H., Algamdi, M. S., & Aldawsari, A. M. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111442 · Cited by 453
Self-citationAdsorptive removal of dyes from wastewater using a metal-organic framework: A review
Uddin, M. J., Ampiaw, R. E., & Lee, W. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131314 · Cited by 451
MOF based engineered materials in water remediation: Recent trends
Rego, R. M., Kuriya, G., Kurkuri, M. D., & Kigga, M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123605 · Cited by 384
Zhao, X., Wang, X., & Lou, T. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124054 · Cited by 322
Metadata
- Authors
- Alqadami, A. A., Naushad, M., Alothman, Z. A., & Ahamad, T.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 223
- Pages
- 29-36
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2807441849
- Cited by
- 390
- References
- 51
- FWCI
- 20.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.