The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes
Abstract
The world water resources are contaminated due to discharge of a large number of pollutants from industrial and domestic sources. A variety of a single and multiple units of physical, chemical, and biological processes are employed for pollutants removal from wastewater. Adsorption is the most widely utilized process due to high efficiency, simple procedure and cost effectiveness. This paper reviews the research work carried out on the use of geopolymer materials for the adsorption of heavy metals and dyes. Geopolymers possess good surface properties, heterogeneous microstructure and amorphous structure. The performance of geopolymers in the removal of heavy metals and dyes is reported comparable to other materials. The pseudo-second order kinetics and Langmuir isotherm models mostly fit to the adsorption data suggesting homogeneous distribution of adsorption sites with the formation of monolayer adsorbate on the surface of geopolymers. Adsorption of heavy metals and dyes onto geopolymers is spontaneous, endothermic and entropy driven process. Future research should focus on the enhancement of geopolymer performance, testing on pollutants other than heavy metals and dyes, and verification on real wastewater in continuous operation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
A review on the utilization of fly ash
Ahmaruzzaman, M. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.003 · Cited by 2,641
A Critical Review on Textile Wastewater Treatments: Possible Approaches
Holkar, C. R., Jadhav, A. J., Pinjari, D. V., Mahamuni, N. M., & Pandit, A. B. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.07.090 · Cited by 1,927
Heavy metal adsorbents prepared from the modification of cellulose: A review
O’Connell, D. W., Birkinshaw, C., & O’Dwyer, T. F. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.01.036 · Cited by 1,299
Fly Ash-Based Geopolymer Concrete
Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., & Rangan, B. V. (2005) · Australian Journal of Structural Engineering · doi:10.1080/13287982.2005.11464946 · Cited by 885
Adsorption of divalent heavy metal ions from water using carbon nanotube sheets
Tofighy, M. A., & Mohammadi, T. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.09.008 · Cited by 698
Chemical stability of cementitious materials based on metakaolin
Palomo, A., Blanco-Varela, M. T., Granizo, M. L., Puertas, F., Vazquez, T., & Grutzeck, M. W. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00074-5 · Cited by 608
Removal of heavy metal from industrial wastewater using modified activated coconut shell carbon
Amuda, O. S., Giwa, A. A., & Bello, I. A. (2007) · Biochemical Engineering Journal · doi:10.1016/j.bej.2007.02.013 · Cited by 553
Lesmana, S. O., Febriana, N., Soetaredjo, F. E., Sunarso, J., & Ismadji, S. (2009) · Biochemical Engineering Journal · doi:10.1016/j.bej.2008.12.009 · Cited by 487
Adsorption of heavy metals on functionalized-mesoporous silica: A review
Da'na, E. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.03.050 · Cited by 476
Adsorption of copper(II) from aqueous solutions on activated carbon prepared from grape bagasse
Demiral, H., & Güngör, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.084 · Cited by 460
The heavy metal adsorption characteristics on metakaolin-based geopolymer
Cheng, T. W., Lee, M. L., Ko, M. S., Ueng, T. H., & Yang, S. F. (2012) · Applied Clay Science · doi:10.1016/j.clay.2011.11.027 · Cited by 456
Blackburn, R. S. (2004) · Environmental Science & Technology · doi:10.1021/es049972n · Cited by 453
In Situ ATR-FTIR Study of the Early Stages of Fly Ash Geopolymer Gel Formation
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Langmuir · doi:10.1021/la701185g · Cited by 411
Ahmed, M. J. K., & Ahmaruzzaman, M. (2016) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2016.01.014 · Cited by 390
Removal and recovery of lead using nonliving biomass of marine algae
JALALI, R., GHAFOURIAN, H., ASEF, Y., DAVARPANAH, S., & SEPEHR, S. (2002) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(02)00021-3 · Cited by 377
Fly ash-based geopolymer for Pb removal from aqueous solution
Al-Zboon, K., Al-Harahsheh, M. S., & Hani, F. B. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.01.133 · Cited by 344
Heavy metal cation retention by unconventional sorbents (red muds and fly ashes)
Apak, R., Tütem, E., Hügül, M., & Hizal, J. (1998) · Water Research · doi:10.1016/s0043-1354(97)00204-2 · Cited by 333
Zhang, D., Zhou, C.-H., Lin, C.-X., Tong, D.-S., & Yu, W.-H. (2010) · Applied Clay Science · doi:10.1016/j.clay.2010.06.019 · Cited by 328
Rashad, A. M., & Zeedan, S. R. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.12.044 · Cited by 306
Geopolymeric adsorbents from fly ash for dye removal from aqueous solution
Li, L., Wang, S., & Zhu, Z. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.03.062 · Cited by 282
Javadian, H., Ghorbani, F., Tayebi, H.-A., & Asl, S. H. (2015) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.02.018 · Cited by 268
Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters
Novais, R. M., Buruberri, L. H., Seabra, M. P., & Labrincha, J. A. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.07.059 · Cited by 262
The removal of zinc from aqueous solutions by natural bentonite
Mellah, A., & Chegrouche, S. (1997) · Water Research · doi:10.1016/s0043-1354(96)00294-1 · Cited by 241
Merouani, S., Hamdaoui, O., Saoudi, F., Chiha, M., & Pétrier, C. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.046 · Cited by 239
Duan, P., Yan, C., Zhou, W., & Ren, D. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.05.143 · Cited by 237
Porous geopolymeric spheres for removal of Cu(II) from aqueous solution: Synthesis and evaluation
Ge, Y., Cui, X., Kong, Y., Li, Z., He, Y., & Zhou, Q. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.09.038 · Cited by 236
Synergistic and competitive adsorption of organic dyes on multiwalled carbon nanotubes
Wang, S., Ng, C. W., Wang, W., Li, Q., & Hao, Z. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.008 · Cited by 232
Solid-state conversion of fly ash to effective adsorbents for Cu removal from wastewater
Wang, S., Li, L., & Zhu, Z. H. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.018 · Cited by 220
A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution
Liu, Y., Yan, C., Zhang, Z., Wang, H., Zhou, S., & Zhou, W. (2016) · Fuel · doi:10.1016/j.fuel.2016.07.116 · Cited by 214
Kara, İ., Yilmazer, D., & Akar, S. T. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.01.008 · Cited by 214
Fixed-bed column studies on the removal of copper using chitosan immobilized on bentonite
Futalan, C. M., Kan, C.-C., Dalida, M. L., Pascua, C., & Wan, M.-W. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.043 · Cited by 212
Andrejkovičová, S., Sudagar, A., Rocha, J., Patinha, C., Hajjaji, W., da Silva, E. F., Velosa, A., & Rocha, F. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.03.009 · Cited by 209
Fly ash based geopolymer for heavy metal removal: A case study on copper removal
Al-Harahsheh, M. S., Al Zboon, K., Al-Makhadmeh, L., Hararah, M., & Mahasneh, M. (2015) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2015.06.005 · Cited by 207
Sorption of heavy metal ions onto carboxylate chitosan derivatives—A mini-review
Boamah, P. O., Huang, Y., Hua, M., Zhang, Q., Wu, J., Onumah, J., Sam-Amoah, L. K., & Boamah, P. O. (2015) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2015.01.012 · Cited by 199
Removal of ammonium from aqueous solutions using zeolite synthesized from fly ash by a fusion method
Zhang, M., Zhang, H., Xu, D., Han, L., Niu, D., Tian, B., Zhang, J., Zhang, L., & Wu, W. (2011) · Desalination · doi:10.1016/j.desal.2010.12.021 · Cited by 199
Luukkonen, T., Sarkkinen, M., Kemppainen, K., Rämö, J., & Lassi, U. (2016) · Applied Clay Science · doi:10.1016/j.clay.2015.10.027 · Cited by 187
Ge, Y., Cui, X., Liao, C., & Li, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.079 · Cited by 183
Preparation of geopolymer-based inorganic membrane for removing Ni2+ from wastewater
Ge, Y., Yuan, Y., Wang, K., He, Y., & Cui, X. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.08.006 · Cited by 179
Barbosa, T. R., Foletto, E. L., Dotto, G. L., & Jahn, S. L. (2018) · Ceramics International · doi:10.1016/j.ceramint.2017.09.193 · Cited by 179
Reactive dye adsorption onto a novel mesoporous carbon
Galán, J., Rodríguez, A., Gómez, J. M., Allen, S. J., & Walker, G. M. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.12.073 · Cited by 175
Kinetic and equilibrium studies in removing lead ions from aqueous solutions by natural sepiolite
Bektaş, N., Ağım, B. A., & Kara, S. (2004) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.04.015 · Cited by 170
Badawi, M. A., Negm, N. A., Abou Kana, M. T. H., Hefni, H. H., & Abdel Moneem, M. M. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.003 · Cited by 170
Selective adsorption of cesium from an aqueous solution by a montmorillonite-prussian blue hybrid
Alamudy, H. A., & Cho, K. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.137 · Cited by 169
Luukkonen, T., Runtti, H., Niskanen, M., Tolonen, E.-T., Sarkkinen, M., Kemppainen, K., Rämö, J., & Lassi, U. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2015.11.007 · Cited by 166
Study on the performance of metakaolin based geopolymer for Mn(II) and Co(II) removal
Kara, I., Tunc, D., Sayin, F., & Akar, S. T. (2018) · Applied Clay Science · doi:10.1016/j.clay.2018.04.027 · Cited by 160
Geopolymeric concretes For Environmental Protection
Davidovits, J., Comrie, D. C., Paterson, J. H., & Ritcey, D. J. (1990) · ACI Concrete International · Cited by 159
Khan, M. I., Min, T. K., Azizli, K. A., Sufian, S. B., Ullah, H., & Man, Z. B. (2015) · RSC Advances · doi:10.1039/c5ra08255b · Cited by 154
Self-citationFly ash-based geopolymer as a novel photocatalyst for degradation of dye from wastewater
Zhang, Y., & Liu, L. (2013) · Particuology · doi:10.1016/j.partic.2012.10.007 · Cited by 151
Metakaolin-Based Geopolymers for Targeted Adsorbents to Heavy Metal Ion Separation
López, F. J., Sugita, S., Tagaya, M., & Kobayashi, T. (2014) · Journal of Materials Science and Chemical Engineering · doi:10.4236/msce.2014.27002 · Cited by 149
Sulphate removal over barium-modified blast-furnace-slag geopolymer
Runtti, H., Luukkοnen, T., Niskanen, M., Tuomikoski, S., Kangas, T., Tynjälä, P., Tolonen, E.-T., Sarkkinen, M., Kemppainen, K., Rämö, J., et al. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.001 · Cited by 141
Cheng, S., Zhang, L., Ma, A., Xia, H., Peng, J., Li, C., & Shu, J. (2017) · Journal of Environmental Sciences · doi:10.1016/j.jes.2016.12.027 · Cited by 133
Falah, M., MacKenzie, K. J. D., Knibbe, R., et al. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.016 · Cited by 129
Preparation and characterization of a reflective and heat insulative coating based on geopolymers
Zhang, Z., Wang, K., Mo, B. H., Li, X., & Cui, X. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.028 · Cited by 128
Tang, Q. G., Wang, K., Muhammad, Y., Tong, Z., & Cui, X. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.094 · Cited by 126
Adsorption study on orange peel: Removal of Ni(II) ions from aqueous solution
Gönen, F. (2012) · AFRICAN JOURNAL OF BIOTECHNOLOGY · doi:10.5897/ajb11.1753 · Cited by 121
Nasvi, M. C. M., Ranjith, P. G., & Sanjayan, J. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.09.004 · Cited by 119
Yousef, R. I., El-Eswed, B. I., Alshaaer, M., Khalili, F. I., & Khoury, H. N. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.10.004 · Cited by 116
Lee, N. K., Khalid, H. R., & Lee, H. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.01.030 · Cited by 115
Ion exchange in the charge-balancing sites of aluminosilicate inorganic polymers
O'Connor, S. J., MacKenzie, K. J. D., Smith, M. E., & Hanna, J. V. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01254h · Cited by 109
Alouani, M. E., Alehyen, S., Achouri, M. E., & Тайбі, М. (2018) · Journal of Materials and Environmental Sciences · doi:10.26872/jmes.2018.9.1.5 · Cited by 109
Boddu, V. M., Abburi, K., Randolph, A. J., & Smith, E. D. (2008) · Separation Science and Technology · doi:10.1080/01496390801940762 · Cited by 102
Naghsh, M., & Shams, K. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.06.008 · Cited by 101
Zhang, Y., Liu, L. C., Ni, L. L., & Wang, B. L. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.02.025 · Cited by 100
Singhal, A., Gangwar, B. P., & Gayathry, J. M. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.09.013 · Cited by 98
Panda, L., Rath, S. S., Rao, D. S., Nayak, B. B., Das, B., & Misra, P. K. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.05.016 · Cited by 94
Khandaker, S., Kuba, T., Kamida, S., & Uchikawa, Y. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.02.014 · Cited by 90
A facile method for preparation of floatable and permeable fly ash-based geopolymer block
Liu, Y., Yan, C., Zhang, Z., Gong, Y., Wang, H., & Qiu, X. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.09.044 · Cited by 85
Composite Cold Ceramic Geopolymer in a Refractory Application
Comrie, D. C., & Kriven, W. M. (2006) · Ceramic transactions /Ceramic transactions · doi:10.1002/9781118406892.ch14 · Cited by 77
Khandaker, S., Toyohara, Y., Kamida, S., & Kuba, T. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.05.059 · Cited by 77
Fly ash-based geopolymeric adsorbent for copper ion removal from wastewater
Mužek, M. N., Svilović, S., & Zelić, J. (2013) · Desalination and Water Treatment · doi:10.1080/19443994.2013.792015 · Cited by 70
Albayati, T. M., Alwan, G. M., & Mahdy, O. S. (2016) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-016-0231-2 · Cited by 65
Falah, M., & MacKenzie, K. J. D. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.07.198 · Cited by 57
Optimization of the metakaolin geopolymer preparation for maximized ammonium adsorption capacity
Luukkοnen, T., Tolonen, E.-T., Runtti, H., Kemppainen, K., Perämäki, P., Rämö, J., & Lassi, U. M. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1156-9 · Cited by 54
Falah, M., MacKenzie, K. J. D., Hanna, J. V., & Page, S. J. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9295-3 · Cited by 50
Adsorption of Cu(II), Ni(II), Zn(II), Cd(II) and Pb(II) onto Kaolin/Zeolite Based- Geopolymers
El-Eswed, B. I., Alshaaer, M., Yousef, R. I., Hamadneh, I., & Khalili, F. I. (2012) · Advances in Materials Physics and Chemistry · doi:10.4236/ampc.2012.24b032 · Cited by 49
Iron Oxide NPs Facilitated a Smart Building Composite for Heavy-Metal Removal and Dye Degradation
Maiti, M., Sarkar, M., Malik, M. A., Xu, S., Li, Q., & Mandal, S. (2018) · ACS Omega · doi:10.1021/acsomega.7b01545 · Cited by 49
Microstructural characteristics and adsorption potential of a zeolitic tuff–metakaolin geopolymer
Alshaaer, M., Zaharaki, D., & Komnitsas, K. (2014) · Desalination and Water Treatment · doi:10.1080/19443994.2014.938306 · Cited by 45
Cesium-adsorbent Geopolymer Foams Based on Silica from Rice Husk and Metakaolin
López, F. J., Sugita, S., & Kobayashi, T. (2013) · Chemistry Letters · doi:10.1246/cl.130851 · Cited by 42
Alandis, N. M., Aldayel, O. A., Mekhemer, W. K., Hefne, J., & Jokhab, H. A. (2010) · Journal of Dispersion Science and Technology · doi:10.1080/01932690903294097 · Cited by 40
Lü, L., Chen, L., Shao, W., & Luo, F. (2010) · Journal of Chemical & Engineering Data · doi:10.1021/je1000846 · Cited by 34
Development of functional geopolymers for water purification, and construction purposes
Alshaaer, M., El-Eswed, B. I., Yousef, R. I., Khalili, F. I., & Rahier, H. (2012) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2012.09.012 · Cited by 30
Mužek, M. N., Svilović, S., & Zelić, J. (2016) · Separation Science and Technology · doi:10.1080/01496395.2016.1228675 · Cited by 30
Geopolymer as an adsorbent of heavy metal: A review
Ariffin, N., Abdullah, M. M. A. B., Zainol, M. R. R. M. A., & Murshed, M. F. (2017) · AIP conference proceedings · doi:10.1063/1.5002224 · Cited by 25
Cited by
Vardhan, K. H., Kumar, P. S., & Panda, R. C. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111197 · Cited by 1,618
Saravanan, P., Saravanan, V., Rajeshkannan, R., Arnica, G., Rajasimman, M., Baskar, G., & Pugazhendhi, A. (2024) · Environmental Research · doi:10.1016/j.envres.2024.119440 · Cited by 377
RetractedGeopolymer-zeolite composites: A review
Rożek, P., Król, M., & Mozgawa, W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.152 · Cited by 361
Geopolymer for use in heavy metals adsorption, and advanced oxidative processes: A critical review
Rasaki, S. A., Bingxue, Z., Guarecuco, R., Thomas, T., & Minghui, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.145 · Cited by 304
Geopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 303
Metadata
- Authors
- Siyal, A. A., Shamsuddin, M. R., Khan, M. I., Rabat, N. E., Zulfiqar, M., Man, Z., Siame, J., & Azizli, K. A.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 224
- Pages
- 327-339
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2883215053
- Cited by
- 443
- References
- 85
- FWCI
- 18.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.