Hydrated lanthanum oxide-modified diatomite as highly efficient adsorbent for low-concentration phosphate removal from secondary effluents
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The requirement to the phosphorus (P) emission from wastewater treatment plants (WWTPs) is becoming increasingly strict, which makes an advanced treatment for the low-concentration phosphate removal from secondary effluents indispensable. In present work, hydrated lanthanum (La) oxide-modified diatomite composites (La-diatomite) were fabricated by a facile method and employed as the highly efficient adsorbent for the low-concentration phosphate removal from simulating secondary effluents. Comparative experiments indicated that the La-diatomite treated by 0.1 mol/L LaCl3 exhibited the highest La availability (P/La molar ratio of 2.30) and performed good selectivity to phosphate adsorption even with the coexistence of competing anions and humic acid. The maximum P adsorption capacity reached to 58.7 mg P/g and the 96% P was removed quickly within 30 min at initial phosphate concentration 2 mg P/L. Insignificant La leaching was observed during the process due to the La stabilization by macroporous diatomite. Eight cycles of adsorption-desorption experiments revealed that the excellent repeated use property of La-diatomite. At the column test, La-diatomite showed superior treatment capacities of 3455 kg water/kg La-diatomite for simulated secondary effluents. The La-diatomite maintained high and stable adsorption effectiveness in wide pH range, which should be attributed to the synergistic effect of electrostatic interactions, ligand exchange and Lewis acid-based interaction. This work might provide a candidate for low-concentration phosphate removal from secondary effluent to alleviate the eutrophication.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phosphate adsorption on lanthanum loaded biochar
Wang, Z., Shen, D., Shen, F., & Li, T. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.02.004 · Cited by 423
Xie, F., Wu, F., Liu, G., Mu, Y., Feng, C., Wang, H., & Giesy, J. P. (2014) · Environmental Science & Technology · doi:10.1021/es4037379 · Cited by 269
He, J., Wang, W., Sun, F., Shi, W., Qi, D., Wang, K., Shi, R., Cui, F., Wang, C., & Chen, X. (2015) · ACS Nano · doi:10.1021/acsnano.5b04236 · Cited by 226
Cited by
Feng, Y., Luo, Y., He, Q., Zhao, D., Zhang, K., Shen, S., & Wang, F. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105267 · Cited by 121
Metadata
- Authors
- Wu, Y., Li, X., Yang, Q., Wang, D., Xu, Q., Yao, F., Chen, F., Tao, Z., & Huang, X.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 231
- Pages
- 370-379
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2898403693
- Cited by
- 201
- References
- 3
- FWCI
- 17.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.