An overview on trace CO2 removal by advanced physisorbent materials
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
This review paper focuses on various gas processing technologies and materials that efficiently capture trace levels of carbon dioxide (CO2). Fundamental separation mechanisms such as absorption, adsorption, and distillation technology are presented. Liquid amine-based carbon capture (C-capture) technologies have been in existence for over half a century, however, liquid amine capture relies upon chemical reactions and is energy-intensive. Liquid amines are thus not economically viable for broad deployment and offer little room for innovation. Innovative C-capture technologies must improve both the environmental footprint and cost-effectiveness. As a promising alternative, physisorbents have many advantages including considerably lower regeneration energy. Generally, existing classes of physisorbent materials, such as metal-organic frameworks (MOFs) and zeolites are selective toward C-capture. However, their selectivity is currently not high enough to remove trace levels (e.g., ~1%) of CO2 from various natural gas process streams. This review summarizes the current advancements in physisorbent materials for CO2 capture. Here, key performance parameters needed to select the most suitable candidate are highlighted. Furthermore, this review discusses the scope for the development of better performing CO2 selective physisorbents from both environmental and economic perspectives. In addition, hybrid ultra microporous materials (HUMs), characterized mainly by ultra-micro pores (<0.7 nm), are discussed in reference to C-capture. Various characteristics of HUMs result in high selectivity and applicability in difficult separations such as the gas sweetening and C-capture from complex humid mixed gas streams.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Cambridge Structural Database
Groom, C. R., Bruno, I. J., Lightfoot, M. P., & Ward, S. C. (2016) · Acta Crystallographica Section B Structural Science, Crystal Engineering and Materials · doi:10.1107/s2052520616003954 · Cited by 10,297
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Rufford, T. E., Smart, S., Watson, G. C. Y., Graham, B. F., Boxall, J., Diniz da Costa, J. C., & May, E. F. (2012) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2012.06.016 · Cited by 676
Direct Air Capture of CO2 by Physisorbent Materials
Kumar, A., Madden, D. G., Lusi, M., Chen, K., Daniels, E. A., Curtin, T., Perry, J. J., & Zaworotko, M. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506952 · Cited by 588
Self-citationReducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Cited by
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Carbon dioxide capture with zeotype materials
Fu, D., & Davis, M. E. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00508e · Cited by 284
Carbon Capture Technologies: A Review on Technology Readiness Level
Hekmatmehr, H., Esmaeili, A., Pourmahdi, M., Atashrouz, S., Abedi, A., Ali Abuswer, M., Nedeljkovic, D., Latifi, M., Farag, S., & Mohaddespour, A. (2024) · Fuel · doi:10.1016/j.fuel.2024.130898 · Cited by 189
Davarpanah, E., Armandi, M., Hernández, S., Fino, D., Arletti, R., Bensaid, S., & Piumetti, M. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.111229 · Cited by 125
Wang, X., Yan, N., Xie, M., Liu, P., Bai, P., Su, H., Wang, B., Wang, Y., Li, L., Cheng, T., et al. (2021) · Chemical Science · doi:10.1039/d1sc00619c · Cited by 90
Metadata
- Authors
- Khraisheh, M., Mukherjee, S., Kumar, A., Al Momani, F., Walker, G., & Zaworotko, M. J.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 255
- Pages
- 109874
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2990218580
- Cited by
- 103
- References
- 7
- FWCI
- 4.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An overview on trace CO2 removal by advanced physisorbent materials. https://app.cochat.ai/papers/10.1016/j.jenvman.2019.109874
- The paper
- Khraisheh, M., Mukherjee, S., Kumar, A., Al Momani, F., Walker, G., & Zaworotko, M. J. (2020). An overview on trace CO2 removal by advanced physisorbent materials. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2019.109874
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.