The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
3D printing of zirconia via digital light processing: optimization of slurry and debinding process
Abstract
Abstract Digital light processing (DLP) is regarded as one of the most promising 3D printing technologies to process ceramics, however the precise composition of the slurry and the optimisation of the debinding process are still challenges that need to be overcome. In this work, both the dispersion and rheological behaviour of the zirconia slurry were studied using rheometery and UV-vis spectroscopy, and optimising the dispersant concentration was found to have significant benefits. Zirconia green parts were fabricated with zirconia slurry based on DLP technology, which exhibited good dimensional resolution under an exposure energy dose of 15 mJ cm-2. In addition, the debinding process was studied using TGA and an optimised approach was designed and developed. Dye penetration and SEM results showed that debinding under argon, rather than flowing air, could lead to crack-free parts at heating rates of either 0.2 or 0.5 °C min-1, though the former yielded slightly better results overall.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Cited by
A review on additive manufacturing of ceramic matrix composites
Sun, J., Ye, D., Zou, J., Chen, X., Wang, Y., Yuan, J., Liang, H., Qu, H., Binner, J., & Bai, J. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.039 · Cited by 265
Self-citationZhou, S., Liu, G., Wang, C., Zhang, Y., Yan, C., & Shi, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112632 · Cited by 150
Gu, Q., Wang, H., Gao, W., Yu, J., & Zhou, X. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.06.142 · Cited by 78
Metadata
- Authors
- Sun, J., Binner, J., & Bai, J.
- Venue
- Journal of the European Ceramic Society
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 40
- Issue
- 15
- Pages
- 5837-5844
- ISSN
- 0955-2219 (ISSN-L)
- OpenAlex
- W3029772079
- Cited by
- 175
- References
- 1
- FWCI
- 6.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printing of zirconia via digital light processing: optimization of slurry and debinding process. https://app.cochat.ai/papers/10.1016/j.jeurceramsoc.2020.05.079
- The paper
- Sun, J., Binner, J., & Bai, J. (2020). 3D printing of zirconia via digital light processing: optimization of slurry and debinding process. Journal of the European Ceramic Society. https://doi.org/10.1016/j.jeurceramsoc.2020.05.079
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.