Output feedback control of electro-hydraulic servo actuators with matched and mismatched disturbances rejection
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this paper, two output feedback controllers are proposed for motion control of double-rod electro-hydraulic servo actuators with matched and mismatched disturbances rejection. All of them employ an linear extended state observer (LESO) to achieve real-time estimates of the unmeasured system states and matched disturbance, and a nonlinear disturbance observer (NDO) to estimate the largely unknown mismatched disturbance at the same time. Thus, the disturbances are compensated via their online estimates in a feedforward way when implementing the resulting control algorithms, respectively. Furthermore, a continuously differentiable friction model is employed to compensate the majority of nonlinear friction existing in the system and reduce the burden of the NDO. Specially, one of the proposed control schemes utilizes model-based compensation terms depending on the desired trajectory to be tracked instead of the estimated system states. By doing this, online computation burden can be reduced. The stability of the whole closed-loop system under each control scheme is guaranteed by theoretical analysis. Moreover, the applicability of each control scheme are validated by experiments in different working conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From PID to Active Disturbance Rejection Control
Han, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011621 · Cited by 6,803
On the convergence of an extended state observer for nonlinear systems with uncertainty
Guo, B.-Z., & Zhao, Z.-L. (2011) · Systems & Control Letters · doi:10.1016/j.sysconle.2011.03.008 · Cited by 893
Cited by
Li, J., Ji, R., Liang, X., Ge, S. S., & Yan, H. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3218574 · Cited by 659
“As described in [49], unknown friction nonlinearities have a substantial influence on tracking performance, which is given as fr (x) = a1 tanh(300x2) + a2[tanh(15x2) − tanh(1.”
BackgroundXu, Z., Sun, C., Hu, X., Liu, Q., & Yao, J. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2023.3236114 · Cited by 113
Self-citationChen, J., Sun, R., & Zhu, B. (2020) · Aerospace Science and Technology · doi:10.1016/j.ast.2020.106028 · Cited by 53
Yang, G., & Yao, J. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.03.029 · Cited by 51
Self-citationPhan, V. D., Vo, C. P., Dao, H. V., & Ahn, K. K. (2021) · IEEE Access · doi:10.1109/access.2021.3101038 · Cited by 44
Metadata
- Authors
- Yang, G., & Yao, J.
- Venue
- Journal of the Franklin Institute
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 356
- Issue
- 16
- Pages
- 9152-9179
- ISSN
- 0016-0032 (ISSN-L)
- OpenAlex
- W2971428107
- Cited by
- 85
- References
- 2
- FWCI
- 7.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.