The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Removal of Pb(II) ions from aqueous solutions by sulphuric acid-treated wheat bran
Abstract
Sulphuric acid-treated wheat bran (STWB) was used as an adsorbent to remove Pb(II) ions from aqueous solution. It was observed that the adsorption yield of Pb(II) ions was found to be pH dependent. The equilibrium time for the process was determined as 2h. STWB gave the highest adsorption yield at around pH 6.0. At this pH, adsorption percentage for an initial Pb(II) ions concentration of 100mg/L was found to be 82.8 at 25 degrees C for contact time of 2h. The equilibrium data obtained at different temperatures fitted to the non-linear form of Langmuir, Freundlich and Redlich-Peterson and linear form of Langmuir and Freundlich models. Isotherm constants were calculated and compared for the models used. The maximum adsorption capacity (q(max)) which was obtained linear form of Langmuir model increased from 55.56 to 79.37mg/g with increasing temperature from 25 to 60 degrees C. Similar trend was observed for other isotherm constants related to the adsorption capacity. Linear form of Langmuir isotherm data was evaluated to determine the thermodynamic parameters for the process. Thermodynamic parameters show that adsorption process of Pb(II) ions is an endothermic and more effective process at high temperatures. The pseudo nth order kinetic model was successfully applied to the kinetic data and the order (n) of adsorption reaction was calculated at the range from 1.711 to 1.929. The values of k(ad) were found to be 5.82x10(-4) and 21.81x10(-4)(min(-1))(mg/g)(1-n) at 25 and 60 degrees C, respectively. Activation energy was determined as 29.65kJ/mol for the process. This suggest that the adsorption Pb(II) ions by STWB is chemically controlled.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Cited by
Adsorption kinetic models: Physical meanings, applications, and solving methods
Wang, J., & Guo, X. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122156 · Cited by 2,937
Wan Ngah, W. S., & Hanafiah, M. A. K. M. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.06.011 · Cited by 1,850
Insight into the adsorption kinetics models for the removal of contaminants from aqueous solutions
Tan, K. L., & Hameed, B. H. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2017.01.024 · Cited by 1,206
Theoretical models of sorption kinetics including a surface reaction mechanism: A review
Plazinski, W., Rudzinski, W., & Plazinska, A. (2009) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2009.07.009 · Cited by 1,006
Ali, R. M., Hamad, H. A., Hussein, M. M., & Malash, G. F. (2016) · Ecological Engineering · doi:10.1016/j.ecoleng.2016.03.015 · Cited by 706
Metadata
- Authors
- OZER, A.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2007-03-22
- Volume
- 141
- Issue
- 3
- Pages
- 753-761
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2000952387
- Cited by
- 208
- References
- 1
- FWCI
- 5.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Removal of Pb(II) ions from aqueous solutions by sulphuric acid-treated wheat bran. https://app.cochat.ai/papers/10.1016/j.jhazmat.2006.07.040
- The paper
- OZER, A. (2007). Removal of Pb(II) ions from aqueous solutions by sulphuric acid-treated wheat bran. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2006.07.040
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.