The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Mechanical properties and microstructure analysis of fly ash geopolymeric recycled concrete
Open accessAbstract
Six mixtures with different recycled aggregate (RA) replacement ratios of 0%, 50% and 100% were designed to manufacture recycled aggregate concrete (RAC) and alkali-activated fly ash geopolymeric recycled concrete (GRC). The physical and mechanical properties were investigated indicating different performances from each other. Optical microscopy under transmitted light and scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDX) were carried out in this study in order to identify the mechanism underlying the effects of the geopolymer and RA on concrete properties. The features of aggregates, paste and interfacial transition zone (ITZ) were compared and discussed. Experimental results indicate that using alkali-activated fly ash geopolymer as replacement of ordinary Portland cement (OPC) effectively improved the compressive strength. With increasing of RA contents in both RAC and GRC, the compressive strength decreased gradually. The microstructure analysis shows that, on one hand, the presence of RA weakens the strength of the aggregates and the structure of ITZs; on the other hand, due to the alkali-activated fly ash in geopolymer concrete, the contents of Portlandite (Ca(OH)(2)) and voids were reduced, as well as improved the matrix homogeneity. The microstructure of GRC was changed by different reaction products, such as aluminosilicate gel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
The greening of the concrete industry
Meyer, C. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.12.010 · Cited by 1,548
Poon, C. S., Shui, Z. H., & Lam, L. (2004) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2004.03.005 · Cited by 1,053
Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach
Tam, V. W. Y., Gao, X. F., & Tam, C. M. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.025 · Cited by 997
Geopolymeric materials prepared using Class F fly ash and elevated temperature curing
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 946
Influence of recycled concrete aggregates on strength properties of concrete
Tabsh, S. W., & Abdelfatah, A. S. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.06.007 · Cited by 830
Engineering properties of inorganic polymer concretes (IPCs)
Sofi, M., van Deventer, J. S. J., Mendis, P. A., & Lukey, G. C. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.008 · Cited by 522
Hansen, T. C. (1986) · Materials and Structures · doi:10.1007/bf02472036 · Cited by 496
Influence of Fly Ash as Cement Replacement on the Properties of Recycled Aggregate Concrete
Kou, S. C., Poon, C. S., & Chan, D. (2007) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2007)19:9(709 · Cited by 494
Mechanical and microstructural properties of alkali-activated fly ash geopolymers
Komljenović, M., Baščarević, Z., & Bradić, V. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.04.064 · Cited by 446
Steveson, M., & Sagoe-Crentsil, K. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-2794-x · Cited by 207
Steveson, M., & Sagoe-Crentsil, K. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-1226-2 · Cited by 207
Carbonation around near aggregate regions of old hardened concrete cement paste
Tam, V. W. Y., Gao, X., & Tam, C. M. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.07.042 · Cited by 41
Cited by
Geopolymer mortars as sustainable repair material: A comprehensive review
Fahim Huseien, G., Mirza, J., Ismail, M., Ghoshal, S. K., & Abdulameer Hussein, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.076 · Cited by 462
Development of geopolymer mortar under ambient temperature for in situ applications
Al-Majidi, M. H., Lampropoulos, A., Cundy, A., & Meikle, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.085 · Cited by 410
Alsalman, A., Assi, L. N., Kareem, R. S., Carter, K., & Ziehl, P. (2021) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2021.100047 · Cited by 344
Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature
Xie, T., & Ozbakkaloglu, T. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.031 · Cited by 344
Influence of recycled aggregate on fly ash geopolymer concrete properties
Nuaklong, P., Sata, V., & Chindaprasirt, P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.10.109 · Cited by 333
Metadata
- Authors
- Shi, X. S., Collins, F. G., Zhao, X. L., & Wang, Q. Y.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2012-10
- Volume
- 237-238
- Pages
- 20-29
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2061406655
- Cited by
- 268
- References
- 16
- FWCI
- 10.70
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.