Carbamazepine degradation using a N-doped TiO 2 coated photocatalytic membrane reactor: Influence of physical parameters
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Commercial α-Al2O3 photocatalytic membranes with a pore size of 200 and 800-nm were coated with N-doped TiO2 photocatalytic film using a sol-gel technique for concurrent bottom-up filtration and photocatalytic oxidation. X-ray diffraction confirmed that the deposited N-doped TiO2 films are in the form of anatase with 78-84% coverage of the membrane surface. The concentration of N found by X-ray photoelectron spectroscopy was in the range of 0.3-0.9 atomic percentage. Membrane permeability after coating decreased by 50% and 12% for the 200- and 800-nm membrane substrates, respectively. The impact of operational parameters on the photocatalytic activity (PCA) of the N-doped TiO2-coated membranes was examined in a laboratory flow cell based on degradation of the model micropollutant carbamazepine, using a solar simulator as the light source. The significant gap in degradation rate between flow through the membrane and flow on the surface of the membrane was attributed both to the hydraulic effect and in-pore PCA. N-doped TiO2-coated membranes showed enhanced activity for UV wavelengths, in addition to activity under visible light. Experiments of PCA under varying flow rates concluded that the process is in the mass-transfer control regime. Carbamazepine removal rate increased with temperature, despite the decrease in dissolved oxygen concentration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent developments in photocatalytic water treatment technology: A review
Chong, M. N., Jin, B., Chow, C. W. K., & Saint, C. (2010) · Water Research · doi:10.1016/j.watres.2010.02.039 · Cited by 5,386
Cited by
Patel, M., Kumar, R., Kishor, K., Mlsna, T., Pittman, C. U., & Mohan, D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00299 · Cited by 2,654
Koe, W. S., Lee, J. W., Chong, W. C., Pang, Y. L., & Sim, L. C. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-07193-5 · Cited by 1,138
The role of nanotechnology in tackling global water challenges
Mauter, M. S., Zucker, I., Perreault, F., Werber, J. R., Kim, J.-H., & Elimelech, M. (2018) · Nature Sustainability · doi:10.1038/s41893-018-0046-8 · Cited by 583
Asif, M. B., & Zhang, Z. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129481 · Cited by 580
Recent Advances and Applications of Semiconductor Photocatalytic Technology
Zhang, F., Wang, X., Liu, H., Liu, C., Wan, Y., Long, Y., & Cai, Z. (2019) · Applied Sciences · doi:10.3390/app9122489 · Cited by 543
Metadata
- Authors
- Horovitz, I., Avisar, D., Baker, M. A., Grilli, R., Lozzi, L., Di Camillo, D., & Mamane, H.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2016-06
- Volume
- 310
- Pages
- 98-107
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2268478238
- Cited by
- 148
- References
- 1
- FWCI
- 3.58
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Carbamazepine degradation using a N-doped TiO 2 coated photocatalytic membrane reactor: Influence of physical parameters. https://app.cochat.ai/papers/10.1016/j.jhazmat.2016.02.008
- The paper
- Horovitz, I., Avisar, D., Baker, M. A., Grilli, R., Lozzi, L., Di Camillo, D., & Mamane, H. (2016). Carbamazepine degradation using a N-doped TiO 2 coated photocatalytic membrane reactor: Influence of physical parameters. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2016.02.008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.