Microstructure of ultra high performance concrete containing lithium slag
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Lithium slag (LS) is discharged as a byproduct in the process of the lithium carbonate, and it is very urgent to explore an efficient way to recycle LS in order to protect the environments and save resources. Many available supplementary cementitious materials for partial replacement of cement and/or silica fume (SF) can be used to prepare ultra high performance concrete (UHPC). The effect of LS to replace SF partially by weight used as a supplementary cementitious material (0%, 5%, 10% and 15% of binder) on the compressive strengths and microstructure evolution of UHPC has experimentally been studied by multi-techniques including mercury intrusion porosimetry, scanning electron microscope and nanoindentation technique. The results show that the use of LS degrades the microstructure of UHPC at early ages, and however, the use of LS with the appropriate content improves microstructure of UHPC at later ages. The hydration products of UHPC are mainly dominated by ultra-high density calcium-silicate-hydrate (UHD C-S-H) and interfacial transition zone (ITZ) in UHPC has similar compact microstructure with the matrix. The use of LS improves the hydration degree of UHPC and increases the elastic modulus of ITZ in UHPC. LS is a promising substitute for SF for preparation UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Recent advances in understanding the role of supplementary cementitious materials in concrete
Juenger, M. C. G., & Siddique, R. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.03.018 · Cited by 1,229
A review on ultra high performance concrete: Part II. Hydration, microstructure and properties
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.095 · Cited by 924
The nanogranular nature of C–S–H
Constantinides, G., & Ulm, F.-J. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.06.003 · Cited by 901
Innovation in use and research on cementitious material
Scrivener, K. L., & Kirkpatrick, R. J. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.09.025 · Cited by 828
Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation
Xiao, J., Li, W., Sun, Z., Lange, D. A., & Shah, S. P. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.01.006 · Cited by 682
Yazıcı, H., Yardımcı, M. Y., Aydın, S., & Karabulut, A. Ş. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.08.003 · Cited by 439
Hydration and microstructure of ultra high performance concrete incorporating rice husk ash
Van Tuan, N., Ye, G., van Breugel, K., & Copuroglu, O. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.009 · Cited by 412
Interfacial transition zones in recycled aggregate concrete with different mixing approaches
Li, W., Xiao, J., Sun, Z., Kawashima, S., & Shah, S. P. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.06.022 · Cited by 410
Nanogranular packing of C–S–H at substochiometric conditions
Vandamme, M., Ulm, F.-J., & Fonollosa, P. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.09.017 · Cited by 409
Meng, W., & Khayat, K. H. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.069 · Cited by 397
Preparation of Ultra-High Performance Concrete with common technology and materials
Wang, C., Yang, C., Liu, F., Wan, C., & Pu, X. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.11.005 · Cited by 391
The study of using rice husk ash to produce ultra high performance concrete
Van Tuan, N., Ye, G., van Breugel, K., Fraaij, A. L. A., & Bui, D. D. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.11.046 · Cited by 379
Development of ultra-high-performance concrete using glass powder – Towards ecofriendly concrete
Soliman, N. A., & Tagnit-Hamou, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.073 · Cited by 343
Yazıcı, H., Yardımcı, M. Y., Yiğiter, H., Aydın, S., & Türkel, S. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.07.005 · Cited by 342
Yazıcı, H., Yiğiter, H., Karabulut, A. Ş., & Baradan, B. (2008) · Fuel · doi:10.1016/j.fuel.2008.03.005 · Cited by 292
Influence of rice husk ash on strength and permeability of ultra-high performance concrete
Huang, H., Gao, X., Wang, H., & Ye, H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.155 · Cited by 269
Wang, X. H., Jacobsen, S., He, J., Zhang, Z. L., Lee, S. F., & Lein, H. L. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.05.002 · Cited by 267
Mondal, P., Shah, S. P., & Marks, L. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.07.001 · Cited by 261
The hydration and microstructure of ultra high-strength concrete with cement–silica fume–slag binder
Shi, C., Wang, D., Wu, L., & Wu, Z. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.04.013 · Cited by 245
Study on some factors affecting the results in the use of MIP method in concrete research
Kumar, R., & Bhattacharjee, B. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00974-2 · Cited by 237
Durability of the Ultra High Performances Concrete containing metakaolin
Tafraoui, A., Escadeillas, G., & Vidal, T. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.169 · Cited by 231
Experimental study of the interfacial transition zone (ITZ) of model rock-filled concrete (RFC)
Xie, Y., Corr, D. J., Jin, F., Zhou, H., & Shah, S. P. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.002 · Cited by 196
Development of ultra-high performance concrete with locally available materials
Alsalman, A., Dang, C. N., & Hale, W. M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.040 · Cited by 193
Schröfl, C., Gruber, M., & Plank, J. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.08.013 · Cited by 178
Nano-mechanical behavior of a green ultra-high performance concrete
Zhao, S., & Sun, W. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.029 · Cited by 160
Mechanical properties, drying shrinkage, and creep of concrete containing lithium slag
He, Z.-H., Li, L.-Y., & Du, S.-G. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.166 · Cited by 159
Self-citationFoley, E. M., Kim, J. J., & Taha, M. R. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.05.014 · Cited by 141
Creep analysis of concrete containing rice husk ash
He, Z., Li, L.-Y., & Du, S. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.03.014 · Cited by 120
Self-citationElrahman, M. A., & Hillemeier, B. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.02.024 · Cited by 97
Potential of finely ground limestone powder to benefit ultra-high performance concrete mixtures
Burroughs, J. F., Shannon, J., Rushing, T. S., et al. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.073 · Cited by 96
Development of ultra-high performance concretes with self-healing micro/nano-additions
Calvo, J. L. G., Pérez, G., Carballosa, P., Erkizia, E., Gaitero, J. J., & Guerrero, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.015 · Cited by 94
Li, Z. (2016) · Materials Today Communications · doi:10.1016/j.mtcomm.2016.01.001 · Cited by 81
Zhang, T., Yu, Q., Wei, J., & Zhang, P. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.02.013 · Cited by 72
Cited by
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Microstructure of ultra-high-performance concrete (UHPC) – A review study
Bahmani, H., & Mostofinejad, D. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104118 · Cited by 268
Tan, H., Zhang, X., He, X., Guo, Y., Deng, X., Su, Y., Yang, J., & Wang, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.027 · Cited by 268
Sharma, R., Jang, J. G., & Bansal, P. P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103314 · Cited by 181
Metadata
- Authors
- He, Z.-H., Du, S.-G., & Chen, D.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 353
- Pages
- 35-43
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2795823598
- Cited by
- 279
- References
- 36
- FWCI
- 11.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.