High-quality Al@Fe-MOF prepared using Fe-MOF as a micro-reactor to improve adsorption performance for selenite
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
High-quality Al@Fe-MOF was prepared by in situ modification of Fe-MOF with Al3+ to improve the adsorption performance for selenite (Se(Ⅳ)). The structures and properties of Al@Fe-MOF were characterized by powder X-ray diffraction, high resolution transmission electron microscope, X-ray photoelectron spectroscopy (XPS), nitrogen isothermal adsorption-desorption measurement and zeta potential. The adsorption performance of Al@Fe-MOF for Se(Ⅳ) was studied by batch adsorption experiments. A large number of pores in Al@Fe-MOF were filled by AlOOH and some bayerite formed on the surfaces. Compared with those of Fe-MOF, the specific surface area (SSA) and microporosity of Al@Fe-MOF decreased to 1368 m2/g and 38.5%, respectively. Hydrolysis occurred at pH > 5.0 for Fe-MOF, but did not for Al@Fe-MOF at the pH range of 3.0-7.0. Compared with in Fe-MOF, the adsorption capacity and efficiency of SSA for Se(Ⅳ) were increased by 77% and 112%, and the average free energy of adsorption was increased to 11.62 kJ/mol in Al@Fe-MOF. Besides, the Se(Ⅳ) adsorption amount of Al@Fe-MOF was almost not influenced by the pH from 3.0 to 7.0. The high resolution XPS (HR-XPS) and pH analysis indicated that Al species in Al@Fe-MOF could significantly increase the density of adsorption sites to improve its adsorption capacity for Se(Ⅳ).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Selenium environmental cycling and bioavailability: A structural chemist point of view
Fernández-Martínez, A., & Charlet, L. (2009) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-009-9145-3 · Cited by 487
Effect of Ferrihydrite Crystallite Size on Phosphate Adsorption Reactivity
Wang, X., Li, W., Harrington, R., Liu, F., Parise, J. B., Feng, X., & Sparks, D. L. (2013) · Environmental Science & Technology · doi:10.1021/es401301z · Cited by 277
Metadata
- Authors
- Wang, R., Xu, H., Zhang, K., Wei, S., & Deyong, W.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 364
- Pages
- 272-280
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2896910527
- Cited by
- 198
- References
- 3
- FWCI
- 6.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.