Facile fabrication of wood-inspired aerogel from chitosan for efficient removal of oil from Water
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Aerogels that derived from biomass have long been attractive as absorbents for oil clean-up. However, it remains a significant challenge to prepare fully bio-based oil absorbents that combines fast oil/water separation capacity, adequate mechanical robustness and easy recyclability through green and facile strategy. Inspired by the fascinating structure of wood, here we report a highly porous and anisotropic bio-based aerogel by taking advantage of the directional freezing technology, followed by a freeze-drying and silylation process. Due to the directional growth of ice crystals along the vertical direction, a special spring like morphology was obtained, which is mainly composed of well aligned low-tortuosity channels that seamlessly connected to bottom layer. Superior mechanical properties that allow for high mechanical compressing and fast elastic recovery were consequently acquired. Moreover, the silylated CS aerogel displays a rather high oil absorption capacity of 63 g g-1, together with excellent recyclability via simple hand squeezing. By virtue of such hierarchical morphology, a device that could continuously separate oil from water was successfully designed. Given the natural abundance of raw material as well as the easy processability, this work would lay solid foundation for further fabrication of bio-based oil absorbents toward low-cost, high-performance and large-scale commodities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption Removal of Dyes from Single and Binary Solutions Using a Cellulose-based Bioadsorbent
Liu, L., Gao, Z. Y., Su, X. P., Chen, X., Jiang, L., & Yao, J. M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500848m · Cited by 580
Bioinspired wood nanotechnology for functional materials
Berglund, L. A., & Burgert, I. (2018) · Advanced Materials · doi:10.1002/adma.201704285 · Cited by 518
Cited by
Sam, D. K., & Cao, Y. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c06141 · Cited by 15
Metadata
- Authors
- Yi, L., Yang, J., Fang, X., Xia, Y., Zhao, L., Wu, H., & Guo, S.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 385
- Pages
- 121507
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2982038816
- Cited by
- 209
- References
- 2
- FWCI
- 6.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Facile fabrication of wood-inspired aerogel from chitosan for efficient removal of oil from Water. https://app.cochat.ai/papers/10.1016/j.jhazmat.2019.121507
- The paper
- Yi, L., Yang, J., Fang, X., Xia, Y., Zhao, L., Wu, H., & Guo, S. (2020). Facile fabrication of wood-inspired aerogel from chitosan for efficient removal of oil from Water. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2019.121507
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.