Comparative studies on the adsorption of metal ions from aqueous solutions using various functionalized graphene oxide sheets as supported adsorbents
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Graphene oxide (GO) was chemically modified by bis(2-pyridylmethyl)amino groups (BPED) through a multistep procedure. For comparison, and to justify the grafting of BPED groups onto the GO sheets, the GO-based material obtained after each step was used as a solid phase adsorbent for removing Cu(II), Ni(II) and Co(II) metal ions from aqueous solutions. The influence of metal ion concentrations, pH, contact time and temperature on their adsorption onto the GO-based adsorbents was investigated and the GO-EDA-CAC-BPED adsorbent showed the highest ability to adsorb Cu(II), Ni(II) and Co(II) with a concentration of 250 mg.L-1 at pH = 7. Additionally, it was demonstrated that the equilibrium adsorption capacities of these metal ions followed the order of Cu(II)>Ni(II)>Co(II) whatever the GO-based adsorbent. Moreover, to examine the underlying mechanism of the adsorption process, pseudo-first order, pseudo-second order, Elovich or Roginsky-Zeldovich and intraparticle diffusion models were fitted to experimental kinetic data. It was shown that the pseudo-second-order model was the most appropriate one to describe the adsorption of heavy metal ions by the GO-based materials. Finally, it was demonstrated that their desorption/regeneration capacities were higher than 10 cycles, opening the path to the removal of metal ions from wastewater solutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703
New trends in removing heavy metals from industrial wastewater
Barakat, M. A. (2011) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2010.07.019 · Cited by 3,094
Xiao, Y., Azaiez, J., & Hill, J. M. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04724 · Cited by 194
Cited by
Adsorption isotherm models: Classification, physical meaning, application and solving method
Wang, J., & Guo, X. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127279 · Cited by 2,289
Abidli, A., Huang, Y., Ben Rejeb, Z., Zaoui, A., & Park, C. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133102 · Cited by 194
Godiya, C. B., Martins Ruotolo, L. A., & Cai, W. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta07028a · Cited by 177
Othmani, A., Kesraoui, A., HaneneAkrout, Elaissaoui, I., & Seffen, M. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.126480 · Cited by 44
The biosorption of Zn2+ by various biomasses from wastewater: A review
Joshi, H. K., Vishwakarma, M. C., Kumar, R., Sharma, H., Bhandari, N. S., & Joshi, S. K. (2023) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2023.104389 · Cited by 21
Metadata
- Authors
- Chaabane, L., Beyou, E., El Ghali, A., & Baouab, M. H. V.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 389
- Pages
- 121839
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2994112015
- Cited by
- 114
- References
- 3
- FWCI
- 4.93
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparative studies on the adsorption of metal ions from aqueous solutions using various functionalized graphene oxide sheets as supported adsorbents. https://app.cochat.ai/papers/10.1016/j.jhazmat.2019.121839
- The paper
- Chaabane, L., Beyou, E., El Ghali, A., & Baouab, M. H. V. (2020). Comparative studies on the adsorption of metal ions from aqueous solutions using various functionalized graphene oxide sheets as supported adsorbents. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2019.121839
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.