The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Insights to perfluorooctanoic acid adsorption micro-mechanism over Fe-based metal organic frameworks: Combining computational calculation with response surface methodology
Abstract
Adsorption performance, interfacial interaction mechanism and contribution of pores concerning PFOA adsorption to Fe-based metal-organic frameworks (MOFs) including Fe-BTC, MIL-100-Fe and MIL-101-Fe are investigated using experiments and computational calculation at molecular level even electronic level. Fe-BTC (418 mg/g) with more Lewis acid sites demonstrates higher adsorption capacity of PFOA in comparison with MIL-100-Fe (349 mg/g) and MIL-101-Fe (370 mg/g). Adsorption isotherms and kinetics indicate presence of monolayer adsorption and chemisorption in adsorption process. The pH dependence of PFOA adsorption to Fe-based MOFs is statistically revealed by experiments and analysis of variance of response surface methodology (RSM). XPS spectra of MOF-PFOA corroborate that decreasing binding energy of Fe2p and increasing binding energy of F1s, suggesting the presence of Lewis acid/base complexing (LAB) and hydrophobic interaction in adsorption process. Differential charge demonstrates that Fe center and benzene of organic ligands are respectively electron acceptor and donor in adsorption process. Electronic level mechanism finds that LAB complexing dominates adsorption process due to highest overlap of electron cloud. Smaller pores such as triangle and pentagonal pores of Fe-based MOFs contribute to the load of PFOA, while larger hexagonal one enable PFOA to enter into cages, as revealed by computational calculation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Chemical, thermal and mechanical stabilities of metal–organic frameworks
Howarth, A. J., Liu, Y., Li, P., Li, Z., Wang, T. C., Hupp, J. T., & Farha, O. K. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.18 · Cited by 2,204
Adsorption behavior and mechanism of perfluorinated compounds on various adsorbents—A review
Du, Z., Deng, S., Bei, Y., Huang, Q., Wang, B., Huang, J., & Yu, G. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.04.038 · Cited by 1,236
Ethane/ethylene separation in a metal-organic framework with iron-peroxo sites
Li, L., Lin, R.-B., Krishna, R., Li, H., Xiang, S., Wu, H., Li, J., Zhou, W., & Chen, B. (2018) · Science · doi:10.1126/science.aat0586 · Cited by 1,149
Photonic functional metal–organic frameworks
Cui, Y., Zhang, J., He, H., & Qian, G. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00879a · Cited by 661
Harwood, V. J., Levine, A. D., Scott, T. M., Chivukula, V., Lukasik, J., Farrah, S. R., & Rose, J. B. (2005) · Applied and Environmental Microbiology · doi:10.1128/aem.71.6.3163-3170.2005 · Cited by 568
Experimental evidence for the functional relevance of anion–π interactions
Dawson, R. E., Hennig, A., Weimann, D. P., Emery, D., Ravikumar, V., Montenegro, J., Takeuchi, T., Gabutti, S., Mayor, M., Mareda, J., et al. (2010) · Nature Chemistry · doi:10.1038/nchem.657 · Cited by 477
Li, Y., Yang, Z., Wang, Y., Bai, Z., Zheng, T., Dai, X., Liu, S., Gui, D., Liu, W., Chen, M., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-01208-w · Cited by 409
Xie, Q., Li, Y., Lv, Z., Zhou, H., Yang, X., Chen, J., & Guo, H. (2017) · Scientific Reports · doi:10.1038/s41598-017-03526-x · Cited by 385
Synthesis of environmentally relevant fluorinated surfactants—a review
Lehmler, H.-J. (2005) · Chemosphere · doi:10.1016/j.chemosphere.2004.11.078 · Cited by 367
Cited by
UiO-66 metal–organic frameworks in water treatment: A critical review
Ahmadijokani, F., Molavi, H., Rezakazemi, M., Tajahmadi, S., Bahi, A., Ko, F., Aminabhavi, T. M., Li, J.-R., & Arjmand, M. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100904 · Cited by 559
MOF based engineered materials in water remediation: Recent trends
Rego, R. M., Kuriya, G., Kurkuri, M. D., & Kigga, M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123605 · Cited by 384
Dickman, R. A., & Aga, D. S. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2022.129120 · Cited by 365
Lei, X., Lian, Q., Zhang, X., Karsili, T. K., Holmes, W., Chen, Y., Zappi, M. E., & Gang, D. D. (2023) · Environmental Pollution · doi:10.1016/j.envpol.2023.121138 · Cited by 325
Self-citationActivated carbon versus metal-organic frameworks: A review of their PFAS adsorption performance
Pauletto, P. S., & Bandosz, T. J. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127810 · Cited by 309
Metadata
- Authors
- Yang, Y., Zheng, Z., Ji, W., Xu, J., & Zhang, X.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 395
- Pages
- 122686
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W3017017438
- Cited by
- 309
- References
- 56
- FWCI
- 12.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Insights to perfluorooctanoic acid adsorption micro-mechanism over Fe-based metal organic frameworks: Combining computational calculation with response surface methodology. https://app.cochat.ai/papers/10.1016/j.jhazmat.2020.122686
- The paper
- Yang, Y., Zheng, Z., Ji, W., Xu, J., & Zhang, X. (2020). Insights to perfluorooctanoic acid adsorption micro-mechanism over Fe-based metal organic frameworks: Combining computational calculation with response surface methodology. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2020.122686
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.