The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Facile synthesis of multifunctional bone biochar composites decorated with Fe/Mn oxide micro-nanoparticles: Physicochemical properties, heavy metals sorption behavior and mechanism
Abstract
The value-added utilization of waste resources to synthesize functional materials is important to achieve the environmentally sustainable development. In this work, novel micro-nano FeOx- and MnOx-modified bone biochars derived from waste bone meal were obtained at 300 °C, 450 °C and 600 °C, and applied to remove Cd(II), Cu(II) and Pb(II) from aqueous solutions. The results showed that the pyrolysis temperature greatly influenced the specific surface area (SSA), micropore creation, functional groups and heavy metal sorption capacities of FO-BCs and MO-BCs. The effects of solution pH, ionic strength, humic acid (HA), kinetics and thermodynamics on heavy metals adsorption were investigated. Langmuir and pseudo-second order kinetics models fit the adsorption data well, and the FO-BC-450 and MO-BC-600 displayed the highest sorption capacity for Cd(II) (151.3 mg/g and 163.4 mg/g), Cu(II) (219.8 mg/g and 259.0 mg/g) and Pb(II) (271.9 mg/g and 407.2 mg/g), respectively. Due to the dissolved partial hydroxyapatite (HAP), carbonate-bearing hydroxyapatite (CHAP) and the catalysis of Fe(NO3)3, the FO-BCs with higher SSA than the MO-BCs, whereas the sorption capacity displayed an opposite trend. The chemical complex, cation-π bonds, ion exchange and coprecipitation were the dominant mechanisms for metals adsorption. Overall, waste bone resource co-pyrolysis with Fe(NO3)3/KMnO4 impregnation is a promising and high-efficient adsorbents for the remediation of heavy metals-contaminated waters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sustainable biochar to mitigate global climate change
Woolf, D., Amonette, J. E., Street-Perrott, F. A., Lehmann, J., & Joseph, S. (2010) · Nature Communications · doi:10.1038/ncomms1053 · Cited by 2,680
Chen, B., Zhou, D., & Zhu, L. (2008) · Environmental Science & Technology · doi:10.1021/es8002684 · Cited by 1,823
Yang, X., Wan, Y., Zheng, Y., He, F., Yu, Z., Huang, J., Wang, H., Ok, Y. S., Jiang, Y., & Gao, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.119 · Cited by 1,527
A review of biochar as a low-cost adsorbent for aqueous heavy metal removal
Inyang, M. I., Gao, B., Yao, Y., Xue, Y., Zimmerman, A., Mosa, A., Pullammanappallil, P., Ok, Y. S., & Cao, X. (2016) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2015.1096880 · Cited by 1,397
Sun, Y., Yu, I. K. M., Tsang, D. C. W., Cao, X., Lin, D., Wang, L., Graham, N. J. D., Alessi, D. S., Komárek, M., Ok, Y. S., et al. (2019) · Environment International · doi:10.1016/j.envint.2019.01.047 · Cited by 489
Cited by
Liu, R., Zhang, Y., Hu, B., & Wang, H. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.132087 · Cited by 104
Metadata
- Authors
- Xiao, J., Hu, R., Chen, G., & Xing, B.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 399
- Pages
- 123067
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W3034131819
- Cited by
- 213
- References
- 5
- FWCI
- 7.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Facile synthesis of multifunctional bone biochar composites decorated with Fe/Mn oxide micro-nanoparticles: Physicochemical properties, heavy metals sorption behavior and mechanism. https://app.cochat.ai/papers/10.1016/j.jhazmat.2020.123067
- The paper
- Xiao, J., Hu, R., Chen, G., & Xing, B. (2020). Facile synthesis of multifunctional bone biochar composites decorated with Fe/Mn oxide micro-nanoparticles: Physicochemical properties, heavy metals sorption behavior and mechanism. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2020.123067
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.