The DOI matches its Crossref record.
Fabrication of a CO2-responsive chitosan aerogel as an effective adsorbent for the adsorption and desorption of heavy metal ions
Abstract
In the traditional desorption method, strong acid is commonly used as an eluent for the regeneration of adsorbents. It is of critical economic and environmental significance to develop a chemical-free desorption method. In this study, a new CO2-responsive chitosan aerogel adsorbent was synthesized from CO2-responsive poly(acrylic acid-2-(dimethylamino)ethyl methacrylate) and chitosan by physicochemical double crosslinking for the adsorption of Cu2+. Compared with the chitosan aerogel, the adsorption capacity of Cu2+ and mechanical properties of CO2-responsive chitosan aerogel increased by 162% and 660%, respectively. Most importantly, after the adsorption of Cu2+ by CO2-responsive chitosan aerogel, the Cu2+ could be desorbed by CO2 bubbling, and the desorption rate of metal ions was more than 80%. The adsorption of Cu2+ by aerogel was attributed to chelation and complexation. The desorption of porous chitosan/P(AA-co-DMAEMA) aerogels (CPA) by CO2 mainly occurred through charge repulsion of protonated ‒NH2 and ‒N‒ groups. After 6 cycles, the adsorption capacity of CPA for metal ions still reached 70% of the initial adsorption capacity, and the desorption rate reached 75%. This novel CO2-responsive chitosan aerogel is a highly efficient and environmentally friendly adsorbent for the adsorption and recovery of metal ions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hama Aziz, K. H., Mustafa, F. S., Omer, K. M., Hama, S., Hamarawf, R. F., & Rahman, K. O. (2023) · RSC Advances · doi:10.1039/d3ra00723e · Cited by 982
Isotherm models for adsorption of heavy metals from water - a review
Chen, X., Hossain, M. F., Duan, C., Lu, J., Tsang, Y. F., Islam, M. S., & Zhou, Y. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.135545 · Cited by 623
Karimi, F., Ayati, A., Tanhaei, B., Sanati, A. L., Afshar, S., Kardan, A., Dabirifar, Z., & Karaman, C. (2022) · Environmental Research · doi:10.1016/j.envres.2021.111753 · Cited by 294
Metadata
- Authors
- Fan, S., Chen, J., Fan, C., Chen, G., Liu, S., Zhou, H., Liu, R., Zhang, Y., Hu, H., Huang, Z., Qin, Y., & Liang, J.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 416
- Pages
- 126225
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W3164200559
- Cited by
- 162
- References
- 0
- FWCI
- 7.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fabrication of a CO2-responsive chitosan aerogel as an effective adsorbent for the adsorption and desorption of heavy metal ions. https://app.cochat.ai/papers/10.1016/j.jhazmat.2021.126225
- The paper
- Fan, S., Chen, J., Fan, C., Chen, G., Liu, S., Zhou, H., Liu, R., Zhang, Y., Hu, H., Huang, Z., Qin, Y., & Liang, J. (2021). Fabrication of a CO2-responsive chitosan aerogel as an effective adsorbent for the adsorption and desorption of heavy metal ions. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2021.126225
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
