Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 294

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.

A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application

Dak, Gaurav, Pandey, Chandan · 2020 · Journal of Manufacturing Processes

Abstract

In this review article, microstructure and mechanical behavior of the dissimilar welded joint (DWJ) between ferritic-martensitic steel and austenitic grade steel along with its application have been summarized in Ultra Super Critical (USC) power plant. Creep-strength enhanced ferritic-martensitic (CSEF/M) P91 steel was developed to sustain at extreme operating conditions of ultra-supercritical (USC) power plants, and later, P92 was developed to achieve better mechanical properties, higher creep-rupture strength and high operating temperature with the reduction in wall thickness as compared to P91 steel. The most common application of P91/P92 material in power plants includes high pressure and high-temperature steam piping, headers, super-heater tubing, and water-wall tubing. The other most commonly used material in the power plants is austenitic stainless steel, i.e., SS 304 L. The austenitic grade stainless steel offers high resistance to corrosion due to the high wt. % chromium and nickel content (18–20 and 8–12, respectively). Due to the low carbon content, the SS 304 L is less sensitive to the sensitization problem and offers excellent weldability. The joining of these dissimilar materials is frequently required in the power generation industry. The current review focuses on the main difficulty associated with dissimilar welding of martensitic P91/P92 and austenitic grade stainless steel. The different chemical composition, mechanical, physical and metallurgical properties of the martensitic P91/P92 and austenitic grade stainless steel leads to the problems such as hot cracking and carbon migration. The other weldability issues are the formation of a brittle intermetallic compound, the formation of soft transaction heat affected zone along with martensitic steel, δ ferrite formation in fusion zone, diffusion related problem, and residual stresses, which necessitates thorough study and qualification of welds. The effect of coarsening of various precipitates such as M23C6 carbides, MX carbonitrides, and effect of laves phase, z-phase, and sigma phase on mechanical property, and creep-rupture strength of DWJ are also discussed in detail. Based on the literature reviewed, it has been found that some of the above-stated problems can be solved by using nickel-based filler wire due to its intermediate physical and mechanical properties. The selection of the proper filler metal is another vital issue in dissimilar welds joint that is also covered in this review article. The reason behind the formation of the unmixed zone, filler deficient region, peninsula, island, beach, migrated grain boundaries, solidified grain boundaries, and solidified subgrain boundaries during DWJ of martensitic P91/P92 and austenitic grade stainless steel is also discussed. The heat treatment is required to eliminate the heterogeneous microstructure during the dissimilar welding. The effect of post-weld heat treatment (PWHT) on the microstructure and mechanical behavior of the DWJ also reviewed. The residual stress developed during the DWJ may cause the premature failure of the components under service, has also been discussed in detail. The effect associated with the residual stress deformation has been reviewed in the different conditions of the DWJ.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jmapro.2020.08.019

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 28 references

Cited by

See all 294

Metadata

Authors
Dak, G., & Pandey, C.
Venue
Journal of Manufacturing Processes
Publisher
Elsevier BV
Published
2020-10
Volume
58
Pages
377-406
ISSN
1526-6125 (ISSN-L)
OpenAlex
W3081325895
Cited by
294
References
28
FWCI
19.34
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application. https://app.cochat.ai/papers/10.1016/j.jmapro.2020.08.019
The paper
Dak, G., & Pandey, C. (2020). A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application. Journal of Manufacturing Processes. https://doi.org/10.1016/j.jmapro.2020.08.019

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.