The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties
Abstract
The necessity for high performance and low-cost materials caused the researchers worldwide to switch the focus from monolithic to composite materials. In the recent pasts, a significant effort has been made in this direction to fabricate numerous combinations of metal matrix composites. Among the MMCs, aluminum-based composites are treated as the most promising structural materials due to their high corrosion, wear resistance, specific modulus, and weight for automobile and aerospace applications. Aluminum MMCs were produced by various fabrication process after considering different reinforcement particles, such as borides, carbides, oxides, nitrides, and their combinations. Aluminum MMCs revealed excellent mechanical and wear characteristics owing to the formation of stable reinforcement particles in the composites. In the present review article, recent advances in processing, microstructure, wear, and mechanical characterization of aluminum composites reinforced with different particles are addressed. The future scope of these composites is also briefly discussed at the end of the manuscript.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent developments in advanced aircraft aluminium alloys
Dursun, T., & Soutis, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.12.002 · Cited by 2,807
Friction Stir Processing Technology: A Review
Ma, Z. Y. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-007-9459-0 · Cited by 1,206
Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites
Kök, M. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.07.068 · Cited by 775
Aluminum Metal-Matrix Composites for Automotive Applications: Tribological Considerations
Prasad, S. V., & Asthana, R. (2004) · Tribology Letters · doi:10.1023/b:tril.0000044492.91991.f3 · Cited by 703
Developments in the aluminum metal matrix composites reinforced by micro/nano particles – A review
Bhoi, N. K., Singh, H., & Pratap, S. (2020) · Journal of Composite Materials · doi:10.1177/0021998319865307 · Cited by 380
Aluminium Alloys for Aerospace Applications
Rambabu, P., Eswara Prasad, N., Kutumbarao, V. V., & Wanhill, R. J. H. (2017) · Indian Institute of Metals Series · doi:10.1007/978-981-10-2134-3_2 · Cited by 322
Fadavi Boostani, A., Tahamtan, S., Jiang, Z. Y., Wei, D., Yazdani, S., Azari Khosroshahi, R., Taherzadeh Mousavian, R., Xu, J., Zhang, X., & Gong, D. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.10.010 · Cited by 270
Pazhouhanfar, Y., & Eghbali, B. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.10.087 · Cited by 261
Michael Rajan, H. B., Ramabalan, S., Dinaharan, I., & Vijay, S. J. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.08.008 · Cited by 231
Kim, C. S., Cho, K. C., Manjili, M., & Nezafati, M. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1378-x · Cited by 226
Rejil, C. M., Dinaharan, I., Vijay, S. J., & Murugan, N. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.05.049 · Cited by 186
Omrani, E., Moghadam, A. D., Menezes, P. L., & Rohatgi, P. K. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7528-x · Cited by 182
Kök, M. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.038 · Cited by 169
Tian, K., Zhao, Y., Jiao, L., Zhang, S., Zhang, Z., & Wu, X. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.01.117 · Cited by 164
Dinaharan, I., Murugan, N., & Parameswaran, S. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.04.033 · Cited by 159
Synthesis and tribological characterization of in situ cast Al–TiC composites
Tyagi, R. (2005) · Wear · doi:10.1016/j.wear.2005.01.051 · Cited by 154
Thangarasu, A., Murugan, N., Dinaharan, I., & Vijay, S. J. (2014) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2014.05.010 · Cited by 147
Particulate metal matrix composites and their fabrication via friction stir processing – a review
Bajakke, P. A., Malik, V. R., & Deshpande, A. S. (2019) · Materials and Manufacturing Processes · doi:10.1080/10426914.2019.1605181 · Cited by 134
Kaushik, N., & Rao, R. N. (2016) · Tribology International · doi:10.1016/j.triboint.2015.12.045 · Cited by 122
Strengthening in nanostructured 2024 aluminum alloy and its composites containing carbon nanotubes
Choi, H., Min, B. H., Shin, J. H., & Bae, D. H. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.06.008 · Cited by 114
Barati, M., Abbasi, M., & Abedini, M. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.07.034 · Cited by 107
Dry sliding wear behavior of AA6061/ZrB2 in-situ composite
Dinaharan, I., & Murugan, N. (2012) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(11)61249-1 · Cited by 103
Synthesis and evaluation on mechanical properties of LM4/AlN alloy based composites
Vinayagam, M. (2019) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2019.1647313 · Cited by 91
High stress abrasive wear characteristics of Al 7075 alloy and 7075/Al2O3 composite
Sardar, S., Karmakar, S. K., & Das, D. (2018) · Measurement · doi:10.1016/j.measurement.2018.05.090 · Cited by 80
Samer, N., Andrieux, J., Gardiola, B., Karnatak, N., Martin, O., Kurita, H., Chaffron, L., GOURDET, S., Lay, S., & Dezellus, O. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.02.001 · Cited by 78
LIJAY, K. J., Selvam, J. D. R., Dinaharan, I., & Vijay, S. J. (2016) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(16)64255-3 · Cited by 78
Hidalgo-Manrique, P., Yan, S., Lin, F., Hong, Q., Kinloch, I. A., Chen, X., Young, R. J., Zhang, X., & Dai, S. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1450-6 · Cited by 62
Liang, Y., Zhou, J., & Dong, S. Q. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.08.098 · Cited by 40
In-situ preparation of Al matrix composites reinforced by TiB2 particles and sub-micron ZrB2
Zhao, D., Liu, X., Liu, Y., & Bian, X. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-0796-3 · Cited by 40
Ma, B., Wang, J., Lee, T., et al. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2336-y · Cited by 23
The Fabrication and Properties of the Squeeze-Cast TiN/Al Composites
Lu, Y., Li, J., Yang, J., & Li, X. (2015) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1070417 · Cited by 17
Cited by
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Altharan, Y. M., Shamsudin, S., Al-Alimi, S., Saif, Y., & Zhou, W. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e34433 · Cited by 42
Metadata
- Authors
- Samal, P., Vundavilli, P. R., Meher, A., & Mahapatra, M. M.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 59
- Pages
- 131-152
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3089589945
- Cited by
- 644
- References
- 31
- FWCI
- 34.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.