The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Process parameter selection and optimization of laser powder bed fusion for 316L stainless steel: A review
Open accessAbstract
Stainless steel 316L has been an extensively investigated metallic material for laser powder bed fusion (L-PBF) in the past few decades due to its high corrosion resistance. However, there are challenges related to producing L-PBF parts with minimal defects, attaining mechanical properties comparable with traditional process and dependency on time consuming post process treatments. The selection of L-PBF process parameters is crucial to overcome these challenges. This paper reviews the research carried out on L-PBF process parameter optimization for fabrication of 316L steel components for maximizing part densifications and attaining desired microstructure morphologies in parts. A brief work on numerical simulation approach for process parameter optimization for high densifications is also included in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Liverani, E., Toschi, S., Ceschini, L., & Fortunato, A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.042 · Cited by 990
Roberts, I. A., Wang, C., Esterlein, R., Stanford, M., & Mynors, D. J. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.07.004 · Cited by 796
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Scipioni Bertoli, U., Wolfer, A. J., Matthews, M. J., Delplanque, J.-P. R., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.10.037 · Cited by 796
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
Selective laser melting of stainless steel 316L with low porosity and high build rates
Sun, Z., Tan, X., Tor, S. B., & Yeong, W. Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.035 · Cited by 714
Hussein, A., Hao, L., Yan, C., & Everson, R. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.05.070 · Cited by 706
Yadollahi, A., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.07.056 · Cited by 650
Shipley, H., McDonnell, D., Culleton, M., Coull, R., Lupoi, R., O’Donnell, G. E., & Trimble, D. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.01.003 · Cited by 643
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
Kurzynowski, T., Gruber, K., Stopyra, W., Kuźnicka, B., & Chlebus, E. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.01.103 · Cited by 489
Tucho, W. M., Lysne, V. H., Austbø, H., Sjolyst-Kverneland, A., & Hansen, V. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.098 · Cited by 482
Yadroitsev, I., Krakhmalev, P., Yadroitsava, I., Johansson, S., & Smurov, I. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.014 · Cited by 471
Keller, T., Lindwall, G., Ghosh, S., Ma, L., Lane, B. M., Zhang, F., Kattner, U. R., Lass, E. A., Heigel, J. C., Idell, Y., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.003 · Cited by 457
Kamath, C., El-dasher, B., Gallegos, G. F., King, W. E., & Sisto, A. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5954-9 · Cited by 395
Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments
Sing, S. L., & Yeong, W. Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1779999 · Cited by 379
Zhang, B., Dembinski, L., & Coddet, C. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.06.055 · Cited by 370
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Rodgers, T. M., Madison, J. D., & Tikare, V. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.03.053 · Cited by 369
Schoinochoritis, B., Chantzis, D., & Salonitis, K. (2015) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405414567522 · Cited by 341
Prediction of microstructure in laser powder bed fusion process
Acharya, R., Sharon, J. A., & Staroselsky, A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.018 · Cited by 331
Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L
Yakout, M., Elbestawi, M. A., & Veldhuis, S. C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.11.006 · Cited by 275
Zinoviev, A. V., Zinovieva, O., Ploshikhin, V., Александровна, Р. В., & Ревович, Б. Р. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.125 · Cited by 265
Li, Z., Voisin, T., McKeown, J. T., Ye, J., Braun, T., Kamath, C., King, W. E., & Wang, Y. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.05.009 · Cited by 257
Compositionally graded metals: A new frontier of additive manufacturing
Hofmann, D. C., Kolodziejska, J., Roberts, S., Otis, R., Dillon, R. P., Suh, J.-O., Liu, Z.-K., & Borgonia, J.-P. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.208 · Cited by 255
AlMangour, B., Grzesiak, D., Borkar, T., & Yang, J.-M. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.039 · Cited by 246
Yusuf, S. M., Chen, Y., Boardman, R., Yang, S., & Gao, N. (2017) · Metals · doi:10.3390/met7020064 · Cited by 230
Zhong, T., He, K., Li, H., & Yang, L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108076 · Cited by 224
Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
Di, W., Yongqiang, Y., Xubin, S., & Yonghua, C. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3443-y · Cited by 213
Mertens, A., Reginster, S., Paydas, H., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte‐Beckers, J. (2014) · Powder Metallurgy · doi:10.1179/1743290114y.0000000092 · Cited by 211
Ahmadi, A., Mirzaeifar, R., Moghaddam, N. S., Turabi, A. S., Karaca, H. E., & Elahinia, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.043 · Cited by 199
Miranda, G., Faria, S., Bartolomeu, F., Pinto, E., Madeira, S., Mateus, A., Carreira, P., Alves, N., Silva, F. S., & Carvalho, O. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.01.028 · Cited by 187
Huang, S., Sing, S. L., de Looze, G., Wilson, R., & Yeong, W. Y. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103775 · Cited by 166
Popova, E., Rodgers, T. M., Gong, X., Cecen, A., Madison, J. D., & Kalidindi, S. R. (2017) · Integrating materials and manufacturing innovation · doi:10.1007/s40192-017-0088-1 · Cited by 134
Martukanitz, R. P., Michaleris, P., Palmer, T. A., DebRoy, T., Liu, Z., Otis, R., Heo, T. W., & Chen, L. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.09.002 · Cited by 123
Andreau, O., Pessard, É., Koutiri, I., Peyre, P., & Saintier, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105930 · Cited by 110
Capabilities and Performances of the Selective Laser Melting Process
Campanelli, S. L., Contuzzi, N., Angelastro, A., & Domenico, A. (2010) · Sciyo eBooks · doi:10.5772/10432 · Cited by 109
Ghorbani, J., Li, J., & Srivastava, A. K. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.05.025 · Cited by 90
A Review on Direct Metal Laser Sintering: Process Features and Microstructure Modeling
Nandy, J., Sarangi, H., & Sahoo, S. (2019) · Lasers in Manufacturing and Materials Processing · doi:10.1007/s40516-019-00094-y · Cited by 89
Choi, J., Shin, G.-H., Brochu, M., Kim, Y., Yang, S., Kim, K. T., Yang, D.-Y., Lee, C., & Yu, J. (2016) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.m2016284 · Cited by 79
Radhakrishnan, B., Gorti, S. B., Turner, J., Acharya, R., Sharon, J. A., Staroselsky, A., & El-Wardany, T. I. (2018) · Metals · doi:10.3390/met9010014 · Cited by 57
McGregor, D. J., Rylowicz, S., Brenzel, A., Baker, D., Wood, C., Pick, D., Deutchman, H., Shao, C., Tawfick, S., & King, W. P. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101924 · Cited by 52
Qin, Y., Qi, Q., Shi, P., Scott, P. J., & Jiang, X. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1756086 · Cited by 36
Lu, P., Zhang, C., Liang, W., et al. (2020) · Materials Research Express · doi:10.1088/2053-1591/ab6b67 · Cited by 25
Cited by
Agentic additive manufacturing alloy evaluation
Pak, P., Chandrasekhar, A., & Barati Farimani, A. (2026) · Additive Manufacturing Letters · doi:10.1016/j.addlet.2026.100355 · Cited by 4
Metadata
- Authors
- Ahmed, N., Barsoum, I., Haidemenopoulos, G., & Al-Rub, R. K. A.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2022-03
- Volume
- 75
- Pages
- 415-434
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W4205304553
- Cited by
- 306
- References
- 48
- FWCI
- 23.49
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.