The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Microwave assisted sintering of green metal parts
Open accessAbstract
Abstract Microwave processing has gained worldwide acceptance as a novel method for heating and sintering a variety of materials, as it offers specific advantages in terms of speed, energy efficiency, process simplicity, finer microstructures, and lower environmental hazards. Microwave assisted post-treatment of green metal parts (AISI 420 metal powder with 2–3 wt% polymeric binder) proved to be a new method, suitable for near-net-shape and net-shape manufacturing. Green parts exposed to high intensity microwave fields, using either single mode or multimode microwave applicators operating at 2.45 GHz ISM frequency, were investigated in terms of densification behaviour, microstructure and joining micromechanism. The results, in terms of microstructure and shape retention are comparable to the conventional heating ones, reported in literature, but they have been obtained in much shorter time.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electromagnetic Mixing Formulas and Applications
Sihvola, A. (1999) · doi:10.1049/pbew047e · Cited by 1,838
Cited by
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
Oghbaei, M., & Mirzaee, O. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.01.068 · Cited by 1,270
Mishra, R. R., & Sharma, A. K. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.035 · Cited by 895
Sun, J., Wang, W., & Yue, Q. (2016) · Materials · doi:10.3390/ma9040231 · Cited by 792
Wojnarowicz, J., Chudoba, T., & Lojkowski, W. (2020) · Nanomaterials · doi:10.3390/nano10061086 · Cited by 361
Metadata
- Authors
- Leonelli, C., Veronesi, P., Denti, L., Gatto, A., & Iuliano, L.
- Venue
- Journal of Materials Processing Technology
- Publisher
- Elsevier BV
- Published
- 2008-08
- Volume
- 205
- Issue
- 1-3
- Pages
- 489-496
- ISSN
- 0924-0136 (ISSN-L)
- OpenAlex
- W2048595733
- Cited by
- 187
- References
- 1
- FWCI
- 3.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.