The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For this purpose, three approaches can be used: Lagrangian, arbitrary Lagrangian-Eulerian (ALE) and couple Euler and Lagrangian (CEL) methods [33].”
From Theoretical and experimental studies on fabrication of two-layer aluminum−copper pipe by friction stir additive manufacturing (2021) · cites this paper as [33]
In the citing paper
“Unlike the Lagrangian element, Eulerian elements do not experience any change in their geometry, and the geometry of these elements will remain constant throughout the simulation.”
From Theoretical and experimental studies on fabrication of two-layer aluminum−copper pipe by friction stir additive manufacturing (2021) · cites this paper as [33]
In the citing paper
“Due to these properties, Eulerian elements are simply able to model large deformations and have a higher efficiency in terms of simulation cost [33,34].”
From Theoretical and experimental studies on fabrication of two-layer aluminum−copper pipe by friction stir additive manufacturing (2021) · cites this paper as [33]
In the citing paper
“The Eulerian element is initially empty of the material and the material must be attributed to it in the desired volume.”
From Theoretical and experimental studies on fabrication of two-layer aluminum−copper pipe by friction stir additive manufacturing (2021) · cites this paper as [33]
Citations
Cites
Johnson, G. R. (1983) · Medical Entomology and Zoology · Cited by 3,935
Friction stir welding and processing
(2008) · Choice Reviews Online · doi:10.5860/choice.46-0901 · Cited by 3,862
Microtubule nucleation by γ-tubulin complexes
Kollman, J. M., Merdes, A., Mourey, L., & Agard, D. A. (2011) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm3209 · Cited by 1,583
30th International Symposium on Ballistics
(2018) · doi:10.12783/ballistics2017 · Cited by 500
A local model for the thermomechanical conditions in friction stir welding
Schmidt, H., & Hattel, J. (2005) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/13/1/006 · Cited by 426
Three-dimensional modeling of the friction stir-welding process
Ulysse, P. (2002) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00114-1 · Cited by 421
3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile
Colegrove, P. A., & Shercliff, H. R. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.03.015 · Cited by 376
Material flow in butt friction stir welds in AA2024-T3
Schmidt, H. N. B., Dickerson, T., & Hattel, J. H. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.10.052 · Cited by 352
Thermo-mechanical model with adaptive boundary conditions for friction stir welding of Al 6061
Soundararajan, V., Zekovic, S., & Kovacevic, R. (2005) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.02.008 · Cited by 214
Gharacheh, M. A., Kokabi, A. H., Daneshi, G. H., Amirkhiz, B. S., & Sarrafi, R. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.01.007 · Cited by 165
3D modeling of material flow in friction stir welding under different process parameters
Zhang, H. W., Zhang, Z., & Chen, J. T. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.09.027 · Cited by 164
Numerical studies on controlling of process parameters in friction stir welding
Zhang, Z., & Zhang, H. W. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.01.044 · Cited by 164
Modeling Large-Strain, High-Rate Deformation in Metals
Lesuer, D. R., Kay, G. J., & Leblanc, M. (2001) · University of North Texas Digital Library (University of North Texas) · Cited by 145
Numerical simulation of friction stir butt welding process for AA5083-H18 sheets
Kim, D., Badarinarayan, H., Kim, J. H., Kim, C., Okamoto, K., WAGONER, R. H., & Chung, K. (2009) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2009.10.006 · Cited by 101
Two-Dimensional Finite Element Simulation of Material Flow in the Friction Stir Welding Process
Deng, X., & Xu, S. (2004) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(04)70066-3 · Cited by 69
Comparison of two contact models in the simulation of friction stir welding process
Zhang, Z. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2865-x · Cited by 56
Monitoring and processing the acoustic emission signals from the friction-stir-welding process
Soundararajan, V., Atharifar, H., & Kovacevic, R. (2006) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem586 · Cited by 49
Lam, Y. C., Khoddam, S., & Thomson, P. F. (1998) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(98)00029-6 · Cited by 17
Experimental investigation of the friction coefficient between aluminium and steel
Javadi, M., & Tajdari, M. (2006) · Cited by 15
Experimental Investigation of Friction Stir Seal Welding of Tube-Tubesheet Joints
Al-Badour, F., Merah, N., Shuaib, A. N., & Bazoune, A. (2013) · doi:10.1115/pvp2013-97762 · Cited by 4
Self-citation
Research works printed but not linked: 1
- Abaqus ‘software’ 6, 2011, pp. 11–12.
Cited by
A review of numerical analysis of friction stir welding
He, X., Gu, F., & Ball, A. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.003 · Cited by 506
FALAHATI NAQIBI, M., ELYASI, M., JAMSHIDI AVAL, H., & MIRNIA, M. J. (2021) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(21)65754-0 · Cited by 20
Metadata
- Authors
- Al-Badour, F., Merah, N., Shuaib, A., & Bazoune, A.
- Affiliations
- King Fahd University of Petroleum and Minerals (SA)
- Corresponding author
- Al-Badour, Fadi
- Venue
- Journal of Materials Processing Technology
- Publisher
- Elsevier BV
- Published
- 2013-08
- Volume
- 213
- Issue
- 8
- Pages
- 1433-1439
- ISSN
- 0924-0136 (ISSN-L)
- OpenAlex
- W1984395332
- Cited by
- 237
- References
- 20
- Citations by year
- 2026: 18 · 2025: 24 · 2024: 30 · 2023: 28 · 2022: 23 · 2021: 24 · 2020: 24 · 2019: 14 · 2018: 17 · 2017: 10 · 2016: 9 · 2015: 5 · 2014: 11
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- doi.org/10.15223/policy-017 (stm-asf)
- doi.org/10.15223/policy-037 (stm-asf)
- doi.org/10.15223/policy-012 (stm-asf)
- doi.org/10.15223/policy-029 (stm-asf)
- doi.org/10.15223/policy-004 (stm-asf)
- Locations
- Journal of Materials Processing Technology (publishedVersion)
- Funders
- King Fahd University of Petroleum and Minerals
- King Abdulaziz City for Science and Technology
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Welding Techniques Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- Physical Sciences › Engineering › Mechanical Engineering › Metal Forming Simulation Techniques
- Keywords
- friction stir welding, weld defects, void formation, friction coefficient, welding speed, plastic zone
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.