The DOI matches its Crossref record.
Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)
Open accessAbstract
Selective Laser Melting (SLM) is a metal additive manufacturing process wherein a laser beam is used to melt and fuse metal powder layer by layer to create a part. This technique involves the interaction of various process parameters such as laser power, scanning speed, powder layer thickness and scan strategy. In this study, the effects of two different scan strategies were investigated and the 17-4PH stainless steel samples fabricated using these strategies, both in as-fabricated and heat-treated conditions, were characterized in terms of relative density, microstructural phase composition and micro-hardness. It was found that the samples printed with double scan strategy showed improvement in the relative density as compared to that printed with single scan strategy. Moreover, it was observed that the samples fabricated using the double scan strategy showed higher hardness than the samples printed using single scan strategy which was attributed to the high phase distribution of martensite than the retained austenite in these samples. In addition, the heat treatment of the as-fabricated samples produced uniform distribution of tempered martensite-dominant phase with negligible retained austenite, resulting in improved hardness as comparable to the heat-treated wrought sample.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Steels in additive manufacturing: A review of their microstructure and properties
Bajaj, P., Hariharan, A., Kini, A., Kürnsteiner, P., Raabe, D., & Jägle, E. A. (2020) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138633 · Cited by 1,020
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
du Plessis, A., Yadroitsev, I., Yadroitsava, I., & Le Roux, S. G. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0060 · Cited by 550
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Metadata
- Authors
- Rashid, R., Masood, S. H., Ruan, D., Palanisamy, S., Rahman Rashid, R. A., & Brandt, M.
- Venue
- Journal of Materials Processing Technology
- Publisher
- Elsevier BV
- Published
- 2017-11
- Volume
- 249
- Pages
- 502-511
- ISSN
- 0924-0136 (ISSN-L)
- OpenAlex
- W2643698912
- Cited by
- 240
- References
- 0
- FWCI
- 17.09
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM). https://app.cochat.ai/papers/10.1016/j.jmatprotec.2017.06.023
- The paper
- Rashid, R., Masood, S. H., Ruan, D., Palanisamy, S., Rahman Rashid, R. A., & Brandt, M. (2017). Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM). Journal of Materials Processing Technology. https://doi.org/10.1016/j.jmatprotec.2017.06.023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.