The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn alloy with in situ micro-rolling
Open accessAbstract
Hybrid in situ rolled wire + arc additive manufacturing (HRAM) is a potential 3D printing method that combines traditional wire and arc additive manufacturing (WAAM) with in situ micro-rolling. Here, the manufacturing defects and mechanical and fatigue strength were explored for an HRAM- and WAAM-processed Al-Mg4.5 Mn alloy. The results show that advanced HRAM can result in significant grain refinement and enhance the material failure resistance compared with standard WAAM. High-resolution X-ray tomography was adopted to identify the defect density, morphology, distribution, and size, which showed that the defect population and size produced by HRAM were considerably lower than those produced by WAAM. Based on high-cycle fatigue tests, fatigue failure was observed entirely from metallurgical defects. Finite element simulations of the defect images based on computed tomography scans showed that lack-of-fusion defects are more dangerous than gas porosity in terms of increasing the local stress. Finally, the defect-controlled fatigue lifetime was predicted by combining the peaks-over-threshold method with a modified NASGRO model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Uzan, N. E., Shneck, R., Yeheskel, O., & Frage, N. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.08.027 · Cited by 302
Cited by
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Review on field assisted metal additive manufacturing
Tan, C., Li, R., Su, J., Du, D., Du, Y., Attard, B., Chew, Y., Zhang, H., Lavernia, E. J., Fautrelle, Y., et al. (2023) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2023.104032 · Cited by 377
Self-citationWang, S., Ning, J., Zhu, L., Yang, Z., Yan, W., Dun, Y., Xue, P., Xu, P., Bose, S., & Bandyopadhyay, A. (2022) · Materials Today · doi:10.1016/j.mattod.2022.08.014 · Cited by 279
Metadata
- Authors
- Xie, C., Wu, S., Yu, Y., Zhang, H., Hu, Y., Zhang, M., & Wang, G.
- Venue
- Journal of Materials Processing Technology
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 291
- Pages
- 117039
- ISSN
- 0924-0136 (ISSN-L)
- OpenAlex
- W3118989139
- Cited by
- 172
- References
- 1
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn alloy with in situ micro-rolling. https://app.cochat.ai/papers/10.1016/j.jmatprotec.2020.117039
- The paper
- Xie, C., Wu, S., Yu, Y., Zhang, H., Hu, Y., Zhang, M., & Wang, G. (2021). Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn alloy with in situ micro-rolling. Journal of Materials Processing Technology. https://doi.org/10.1016/j.jmatprotec.2020.117039
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.