The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals
Abstract
In order to model the effects of grain boundaries in polycrystalline materials we have coupled a crystal-plasticity model for the grain interiors with a new elastic–plastic grain-boundary interface model which accounts for both reversible elastic, as well irreversible inelastic sliding-separation deformations at the grain boundaries prior to failure. We have used this new computational capability to study the deformation and fracture response of nanocrystalline nickel. The results from the simulations reflect the macroscopic experimentally observed tensile stress–strain curves, and the dominant microstructural fracture mechanisms in this material. The macroscopically observed nonlinearity in the stress–strain response is mainly due to the inelastic response of the grain boundaries. Plastic deformation in the interior of the grains prior to the formation of grain-boundary cracks was rarely observed. The stress concentrations at the tips of the distributed grain-boundary cracks, and at grain-boundary triple junctions, cause a limited amount of plastic deformation in the high-strength grain interiors. The competition of grain-boundary deformation with that in the grain interiors determines the observed macroscopic stress–strain response, and the overall ductility. In nanocrystalline nickel, the high-yield strength of the grain interiors and relatively weaker grain-boundary interfaces account for the low ductility of this material in tension.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yielding of steel sheets containing slits
Dugdale, D. S. (1960) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(60)90013-2 · Cited by 7,766
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Numerical simulations of fast crack growth in brittle solids
Xu, X., & Needleman, A. (1994) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(94)90003-5 · Cited by 2,479
Taylor, G. I. (1938) · Cited by 2,264
Computational modelling of impact damage in brittle materials
Camacho, G., & Ortíz, M. (1996) · International Journal of Solids and Structures · doi:10.1016/0020-7683(95)00255-3 · Cited by 2,037
RICE, J. R. (1971) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(71)90010-x · Cited by 1,810
Overview no. 42 Texture development and strain hardening in rate dependent polycrystals
Asaro, R. J., & Needleman, A. (1985) · Acta Metallurgica · doi:10.1016/0001-6160(85)90188-9 · Cited by 1,780
Softening of nanocrystalline metals at very small grain sizes
Schiøtz, J., Di Tolla, F. D., & Jacobsen, K. W. (1998) · Nature · doi:10.1038/35328 · Cited by 1,733
Barenblatt, G. I. (1959) · Journal of Applied Mathematics and Mechanics · doi:10.1016/0021-8928(59)90157-1 · Cited by 1,339
Elastic and tensile behavior of nanocrystalline copper and palladium
Sanders, P. G., Eastman, J. A., & Weertman, J. (1997) · Acta Materialia · doi:10.1016/s1359-6454(97)00092-x · Cited by 858
Superplastic Extensibility of Nanocrystalline Copper at Room Temperature
Lu, L., Sui, M. L., & Lu, K. (2000) · Science · doi:10.1126/science.287.5457.1463 · Cited by 781
Nanocrystalline electrodeposited Ni: microstructure and tensile properties
Torre, F. H. D., Swygenhoven, H. V., & Victoria, M. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00198-2 · Cited by 559
Mechanical properties of nanocrystalline nickel produced by electrodeposition
Ebrahimi, F., Bourne, G. R., Kelly, M., & Matthews, T. (1999) · Nanostructured Materials · doi:10.1016/s0965-9773(99)00050-1 · Cited by 470
Atomic mechanism for dislocation emission from nanosized grain boundaries
Swygenhoven, H. V., Derlet, P. M., & Hasnaoui, A. (2002) · Physical review. B, Condensed matter · doi:10.1103/physrevb.66.024101 · Cited by 436
On the grain size softening in nanocrystalline materials
CONRAD, H., & Narayan, J. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00320-1 · Cited by 429
A computational procedure for rate-independent crystal plasticity
Anand, L., & Kothari, M. (1996) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(96)00001-4 · Cited by 415
Yamakov, V., Wolf, D., Salazar, M., Phillpot, S. R., & Gleiter, H. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00167-7 · Cited by 413
Grain-boundary diffusion creep in nanocrystalline palladium by molecular-dynamics simulation
Yamakov, V., Wolf, D., Phillpot, S. R., & Gleiter, H. (2002) · Acta Materialia · doi:10.1016/s1359-6454(01)00329-9 · Cited by 404
Hall–Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel
Schuh, C. A., Nieh, T. G., & Yamasaki, T. (2002) · Scripta Materialia · doi:10.1016/s1359-6462(02)00062-3 · Cited by 368
Strength and tension/compression asymmetry in nanostructured and ultrafine-grain metals
Cheng, S., Spencer, J. A., & Milligan, W. W. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00286-6 · Cited by 360
Competing plastic deformation mechanisms in nanophase metals
Van Swygenhoven, H., Spaczer, M., Caro, A., & Farkas, D. (1999) · Physical Review B · doi:10.1103/physrevb.60.22 · Cited by 343
Synthesis of bulk nanocrystalline nickel by pulsed electrodeposition
El-Sherik, A. M., & Erb, U. (1995) · Journal of Materials Science · doi:10.1007/bf00356715 · Cited by 315
Van Swygenhoven, H., Spaczer, M., & Caro, A. (1999) · Acta Materialia · doi:10.1016/s1359-6454(99)00109-3 · Cited by 304
Deformation mechanism transitions in nanoscale fcc metals
Asaro, R. J., Krysl, P., & Kad, B. K. (2003) · Philosophical Magazine Letters · doi:10.1080/09500830310001614540 · Cited by 223
Swygenhoven, H. V., & Derlet, P. M. (2002) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418610110058310 · Cited by 66
Plastic Deformation in Metals with Nanosized Grains: Atomistic Simulations and Experiments
Swygenhoven, H. V. (2004) · Materials science forum · doi:10.4028/www.scientific.net/msf.447-448.3 · Cited by 11
Cited by
Mechanical properties of nanocrystalline materials
Meyers, M. A., Mishra, A., & Benson, D. J. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.08.003 · Cited by 4,597
Roters, F., Eisenlohr, P., Hantcherli, L., Tjahjanto, D. D., Bieler, T. R., & Raabe, D. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.10.058 · Cited by 2,175
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
Quey, R., Dawson, P. R., & Barbe, F. (2011) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2011.01.002 · Cited by 1,259
Zhu, T., & Li, J. (2010) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.04.001 · Cited by 828
Surface stress effect in mechanics of nanostructured materials
Wang, J., Huang, Z., Duan, H., Yu, S., Feng, X., Wang, G., Zhang, W., & Wang, T. (2011) · Acta Mechanica Solida Sinica · doi:10.1016/s0894-9166(11)60009-8 · Cited by 349
Metadata
- Authors
- WEI, Y.
- Venue
- Journal of the Mechanics and Physics of Solids
- Publisher
- Elsevier BV
- Published
- 2004-11
- Volume
- 52
- Issue
- 11
- Pages
- 2587-2616
- ISSN
- 0022-5096 (ISSN-L)
- OpenAlex
- W1990836706
- Cited by
- 307
- References
- 26
- FWCI
- 8.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.