The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Preparation and characterization of chitosan/clay composite for direct Rose FRN dye removal from aqueous media: comparison of linear and non-linear regression methods
Open accessAbstract
In the present study, sorption efficacy of chitosan (β-(1→4)-linked d-glucosamine and N-acetyl-d-glucosamine) composite for synthetic direct Rose FRN dye removal from aqueous media was investigated. Chitosan and clay were subjected to chemical modifications to prepare chitosan/clay composite. Batch sorption affecting parameters like pH, composite dose, volume, initial dye concentration, time and temperature were optimized. Maximum sorption capacity (17.18 mg/g) was found within first 40 min of contact. Point of zero charge was found to be 7.0. Linearized and non-linearized regression forms of pseudo 1st and 2nd order kinetic models were used to predict the nature of rate limiting steps involved in the sorption process. Sorption equilibrium data was revealed by applying linear and non-linear equilibrium Langmuir, Freundlich and Redlich–Peterson isotherm models. Calculated values of thermodynamic factors showed that sorption process is exothermic, spontaneous and feasible. Desorption studies were performed for the regeneration of chitosan/clay composite by using different eluting agents. The synthesized composite were characterized by X-ray diffraction (XRD), surface analysis (Brunauer, Emmett and Teller: BET), scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The developed method was also applied on the real textile effluent for the efficient removal of dyes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479 · cited 1×
“The optimization procedure requires the error functions in order to evaluate the best fit isotherm to explain the experimental kinetic and equilibrium data [24,25].”
MethodMarrakchi, F., Khanday, W. A., Asif, M., & Hameed, B. H. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.09.069 · Cited by 281
Cited by
Chitosan modifications for adsorption of pollutants – A review
Saheed, I. O., Oh, W. D., & Suah, F. B. M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124889 · Cited by 616
Bibi, I., Nazar, N., Ata, S., Sultan, M., Ali, A., Abbas, A., Jilani, K., Kamal, S., Sarim, F. M., Khan, M. I., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.10.006 · Cited by 402
Self-citationClay-based nanomaterials and their adsorptive removal efficiency for dyes and antibiotics: A review
Ciğeroğlu, Z., El Messaoudi, N., Şenol, Z. M., Başkan, G., Georgin, J., & Gubernat, S. (2024) · Materials Today Sustainability · doi:10.1016/j.mtsust.2024.100735 · Cited by 156
Metadata
- Authors
- Kausar, A., Naeem, K., Hussain, T., Nazli, Z.-I.-H., Bhatti, H. N., Jubeen, F., Nazir, A., & Iqbal, M.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 8
- Issue
- 1
- Pages
- 1161-1174
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W2898022394
- Cited by
- 176
- References
- 2
- FWCI
- 9.87
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.