The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Review on effect of heat input for wire arc additive manufacturing process
Open accessAbstract
Wire arc additive manufacturing (WAAM) is steadily increasing with significant research work are underway. The ability of WAAM to manufacture a large-scale product at a lower cost and shorter lead times has increased its development. The efficiency or potential of WAAM to become a new lead in the additive manufacturing industry is believed to be realized by a few factors. High efficiency and performance require a higher metal deposition rate, which implies higher heat input that negatively affects the manufacturing process. This paper review works for factors associated with heat input on the WAAM process. The factor affecting these properties were explained to identify the optimized WAAM process in terms of heat input. The paper focuses on the impact of heat input on the macrostructure, microstructure and mechanical properties of the parts deposited in the WAAM process. This review also discussed the effect of heat input used by eight different types of arc welding technologies, with appropriate use of wire materials. The study also highlights that heat input affected the microstructure of the WAAM, causing significant changes in grain structure, grain size and pore area percentage. Besides, it can be suggested that grain structure has a strong influence on the WAAM materials' mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
PRISMA-P Group, Moher, D., Shamseer, L., Clarke, M., Ghersi, D., Liberati, A., Petticrew, M., Shekelle, P., & Stewart, L. A. (2015) · Systematic Reviews · doi:10.1186/2046-4053-4-1 · Cited by 26,223
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Rodrigues, T. A., Duarte, V., Miranda, R. M., Santos, T. G., & Oliveira, J. P. (2019) · Materials · doi:10.3390/ma12071121 · Cited by 779
Rapid manufacturing of metal components by laser forming
Santos, E. C., Shiomi, M., Osakada, K., & Laoui, T. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.09.005 · Cited by 740
Wu, B., Ding, D., Pan, Z. S., et al. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.07.037 · Cited by 352
Brandl, E., Baufeld, B., Leyens, C., & Gault, R. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.087 · Cited by 348
Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing
Ding, D., Pan, Z. S., van Duin, S., Li, H., & Shen, C. (2016) · Materials · doi:10.3390/ma9080652 · Cited by 238
Arc Welding Processes for Additive Manufacturing: A Review
Pan, Z., Ding, D., Wu, B., Cuiuri, D., Li, H., & Norrish, J. (2018) · Transactions on Intelligent Welding Manufacturing · doi:10.1007/978-981-10-5355-9_1 · Cited by 205
Review of Wire Arc Additive Manufacturing for 3D Metal Printing
Li, J. Z., Alkahari, M. R., Rosli, N. A., Hasan, R., Sudin, M. N., & Ramli, F. R. (2019) · International Journal of Automation Technology · doi:10.20965/ijat.2019.p0346 · Cited by 197
Self-citationWire and arc additive manufacturing of metal components: a review of recent research developments
Liu, J., Xu, Y., Ge, Y., Hou, Z., & Chen, S. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05966-8 · Cited by 197
Yildiz, A. S., Davut, K., Koç, B., & Yılmaz, O. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05482-9 · Cited by 166
Wire arc additive manufacturing of hot work tool steel with CMT process
Ali, Y., Henckell, P., Hildebrand, J., Reimann, J., Bergmann, J. P., & Barnikol-Oettler, S. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.01.034 · Cited by 163
Li, F., Chen, S., Shi, J., Zhao, Y., & Tian, H. (2018) · Applied Sciences · doi:10.3390/app8020207 · Cited by 153
Hosseini, V. A., Högström, M., Hurtig, K., Bermejo, M. A. V., Stridh, L.-E., & Karlsson, L. (2019) · Welding in the World · doi:10.1007/s40194-019-00735-y · Cited by 150
Müller, J., Grabowski, M., Müller, C., et al. (2019) · Metals · doi:10.3390/met9070725 · Cited by 148
Process efficiency measurements in the laser engineered net shaping process
Unocic, R. R., & DuPont, J. N. (2004) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-004-0104-7 · Cited by 144
Gu, J., Bai, J., Ding, J., Williams, S., Wang, L., & Liu, K. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.06.030 · Cited by 124
Wang, C., Suder, W., Ding, J., & Williams, S. (2020) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2020.116842 · Cited by 119
Preliminary development of a Wire and Arc Additive Manufacturing system (WAAM)
Prado-Cerqueira, J. L., Diéguez, J. L., & Camacho, A. M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.09.154 · Cited by 117
Impacts of Energy Storage System on Power System Reliability: A Systematic Review
Mohamad, F., & Teh, J. (2018) · Energies · doi:10.3390/en11071749 · Cited by 108
Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel
Fu, Y., Guilan, W., Haiou, Z., & Liang, L. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9621-1 · Cited by 94
Additive Manufacturing with Superduplex Stainless Steel Wire by CMT Process
Lervåg, M., Sørensen, C., Robertstad, A., Brønstad, B. M., Nyhus, B., Eriksson, M., Aune, R., Ren, X., Akselsen, O. M., & Bunaziv, I. (2020) · Metals · doi:10.3390/met10020272 · Cited by 94
Yuan, L., Pan, Z. S., Ding, D., Yu, Z., van Duin, S., Li, H., Li, W., & Norrish, J. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.03.018 · Cited by 88
Microstructure and mechanical properties of 304L steel fabricated by arc additive manufacturing
Ji, L., Lu, J., Liu, C., Jing, C., Fan, H., & Ma, S. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/201712803006 · Cited by 86
Cheepu, M., Lee, C. I., & Cho, S.-M. (2020) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-020-01915-x · Cited by 79
Cited by
A review of various materials for additive manufacturing: Recent trends and processing issues
Srivastava, M., Rathee, S., Patel, V., Kumar, A., & Koppad, P. G. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.10.015 · Cited by 311
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Treutler, K., & Wesling, V. (2021) · Applied Sciences · doi:10.3390/app11188619 · Cited by 293
Wire arc additive manufacturing of low alloyed steels, copper aluminum alloys, and their bimetals
Karamimoghadam, M., Aghayar, Y., Forooghi, F., Denora, V., Mohammadi, M., Contuzzi, N., & Casalino, G. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16436-4 · Cited by 18
“For instance, high heat input or improper arc control may lead to columnar grain growth or residual stresses, while optimized deposition strategies can promote refined, equiaxed microstructures and enhanced mechanical performance [13, 18, 19].”
Metadata
- Authors
- Rosli, N. A., Alkahari, M. R., Abdollah, M. F. B., Maidin, S., Ramli, F. R., & Herawan, S. G.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 11
- Pages
- 2127-2145
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W3128858548
- Cited by
- 322
- References
- 28
- FWCI
- 20.59
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.