CoChat
Sign Up
Cited by 294High Entropy Alloys StudiesIntermetallics and Advanced Alloy PropertiesMetallic Glasses and Amorphous Alloys

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Mechanically alloyed high entropy alloys: existing challenges and opportunities

Open access
Kumar, Akshay, Singh, Alok, Suhane, Amit·2022·Journal of Materials Research and Technology
DOI 10.1016/j.jmrt.2022.01.141
Open this paper in CoChat — free accountOpen PDF

Abstract

High entropy alloys (HEAs) for the first time were reported in 2004, however, the progress in this field was markedly realized since 2010 when a drastic upsurging demand of HEAs was observed owing to their unique properties and possibilities to form various compositions significantly grabbing the attention of academia and researchers. Initially, the main focus of researchers was on equiatomic HEAs which later paradigm shifted to non-equiatomic alloys. With progress in the research, four core effects were examined as the predominant factors enabling the distinguished properties. Amongst, mechanical alloying (MA) followed by the sintering route grabbed the attention of all the researchers dealing with the processing of HEAs. Therefore, the basic objective of this review is to critically discuss the mechanically alloyed HEAs, functional properties, and their applications. Subsequently, the existing challenges and their opportunities are also discussed which leads this review article towards uniqueness and novelty.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jmrt.2022.01.141

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The intermediate VEC range of 6.87-8 corresponds to mixed phases of FCC and BCC.

    “The intermediate VEC range of 6.87 -8 corresponds to mixed phases of FCC and BCC 37 -39 .”

    From Recent advances in high-entropy superconductors (2024) · cites this paper as [39]

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 230

  1. Edelstein, 1997, Challenges in nanomaterials design, Prog Mater Sci, 42, 5, 10.1016/S0079-6425(97)00005-4 · DOI
  2. Ding, 2021, The similarity of elements in multi-principle element alloys based on a new criterion for phase constitution, Mater Des, 207, 109849, 10.1016/j.matdes.2021.109849 · DOI
  3. Joseph, 2021, Computational design of thermally stable and precipitation-hardened Al-Co-Cr-Fe-Ni-Ti high entropy alloys, J Alloys Compd, 888, 161496, 10.1016/j.jallcom.2021.161496 · DOI
  4. Wang, 2021, Effect of equal-channel angular pressing on microstructural evolution, mechanical property and biodegradability of an ultrafine-grained zinc alloy, Mater Sci Eng, 824, 141857, 10.1016/j.msea.2021.141857 · DOI
  5. Kumar, 2016, Investigation of reinforcement content, load and sliding speed on the tribological behaviour of copper based silicon carbide composite using design of experiments, Indian J. Sci. Technol., 9, 10.17485/ijst/2016/v9i45/94574 · DOI
  6. Singh, 2021, Microstructure evolution, mechanical behavior, and fracture analysis of ultrasonic-assisted stir-squeeze cast high strength AA7068/ZrO 2p/Gr p composite under thermal aging, Part Sci Technol, 1
  7. Hitam, 2021, Magnesium-based alloys for solid-state hydrogen storage applications: A review, Int J Hydrogen Energy
  8. Bai, 2021, A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy, J Alloys Compd, 882, 160645, 10.1016/j.jallcom.2021.160645 · DOI
  9. Contla-Pacheco, 2021, Application of the Heat Balance Integral Method to the growth kinetics of nickel boride layers on an Inconel 718 superalloy, Surf Coating Technol, 420
  10. Miracle, 2017, A critical review of high entropy alloys and related concepts, Acta Mater, 122, 448, 10.1016/j.actamat.2016.08.081 · DOI
  11. Zhang, 2013, Recent progress in high-entropy alloys, Adv Mater Res, 631–632, 227
  12. Tian, 2019, The strengthening effects of relatively lightweight AlCoCrFeNi high entropy alloy, Mater. Char., 151, 302, 10.1016/j.matchar.2019.03.006 · DOI
  13. Hemphill, 2012, Fatigue behavior of Al 0.5CoCrCuFeNi high entropy alloys, Acta Mater, 60, 5723, 10.1016/j.actamat.2012.06.046 · DOI
  14. Gwalani, 2019, Compositionally graded high entropy alloy with a strong front and ductile back, Materials Today Communications, 20, 100602, 10.1016/j.mtcomm.2019.100602 · DOI
  15. Ferrari, 2020, Surface segregation in Cr-Mn-Fe-Co-Ni high entropy alloys, Appl Surf Sci, 533, 147471, 10.1016/j.apsusc.2020.147471 · DOI
  16. Wang, 2017, Effect of nitriding on the tribological properties of Al1.3CoCuFeNi2 high-entropy alloy, J Alloys Compd, 725, 365, 10.1016/j.jallcom.2017.07.132 · DOI
  17. Kumar, 2010, Studies on Al6061-SiC and Al7075-Al2O3 metal matrix composites, J Miner Mater Char Eng, 9, 43
  18. Li, 2021, Recent progress in high-entropy alloys for catalysts: synthesis, applications, and prospects, Mater Today Energy, 20
  19. He, 2017, Design of high-entropy alloy: A perspective from nonideal mixing, JOM (J Occup Med), 69, 2092
  20. Cantor, 2004, Microstructural development in equiatomic multicomponent alloys, Mater Sci Eng, 375–377, 213, 10.1016/j.msea.2003.10.257 · DOI
  21. Yeh, 2004, Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes, Advanced Engineering Materials, 6, 299, 10.1002/adem.200300567 · DOI · Paper page
  22. Greer, 2003, Grain refinement of alloys by inoculation of melts, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 361, 479, 10.1098/rsta.2002.1147 · DOI
  23. Peter, 2020, Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale, J Alloys Compd, 820, 10.1016/j.jallcom.2019.153149 · DOI
  24. Gludovatz, 2015, Processing, microstructure and mechanical properties of the CrMnFeCoNi high-entropy alloy, JOM (J Occup Med), 67, 2262
  25. Vaidya, 2017, Influence of sequence of elemental addition on phase evolution in nanocrystalline AlCoCrFeNi: Novel approach to alloy synthesis using mechanical alloying, Mater Des, 126, 37, 10.1016/j.matdes.2017.04.027 · DOI
  26. Miracle, 2014, Exploration and development of high entropy alloys for structural applications, Entropy, 16, 494, 10.3390/e16010494 · DOI
  27. Musicó, 2020, The emergent field of high entropy oxides: Design, prospects, challenges, and opportunities for tailoring material properties, Apl Mater, 8, 1, 10.1063/5.0003149 · DOI
  28. Pickering, 2016, High-entropy alloys: a critical assessment of their founding principles and future prospects, Int Mater Rev, 61, 183, 10.1080/09506608.2016.1180020 · DOI
  29. Yeh, 2013, Alloy design strategies and future trends in high-entropy alloys, JOM (J Occup Med), 65, 1759
  30. George, 2020, High entropy alloys: A focused review of mechanical properties and deformation mechanisms, Acta Mater, 188, 435, 10.1016/j.actamat.2019.12.015 · DOI
  31. Praveen, 2018, High-entropy alloys: potential candidates for high-temperature applications – an overview, Adv Eng Mater, 20, 1, 10.1002/adem.201700645 · DOI
  32. Xu, 2020, High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process, Surf Coating Technol, 398, 126093, 10.1016/j.surfcoat.2020.126093 · DOI
  33. Lu, 2018, The influence of nanocrystalline CoNiFeAl0.4Ti0.6Cr0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiCp/7075Al composites, Mater Sci Eng, 726, 126, 10.1016/j.msea.2018.04.080 · DOI
  34. Oh, 2016, Lattice distortions in the FeCoNiCrMn high entropy alloy studied by theory and experiment, Entropy, 18, 1, 10.3390/e18090321 · DOI
  35. Wang, 2017, Investigation into nanoscratching mechanical response of AlCrCuFeNi high-entropy alloys using atomic simulations, Appl Surf Sci, 416, 470, 10.1016/j.apsusc.2017.04.009 · DOI
  36. Ranganathan, 2003, Alloyed pleasures: Multimetallic cocktails, Curr Sci, 85, 1404
  37. Murty, 2019, 2, 1
  38. MacDonald, 2017, Recent progress in high entropy alloy research, JOM (J Occup Med), 69, 2024
  39. Wei, 2018, Microstructure and mechanical property of a novel ReMoTaW high-entropy alloy with high density, Int J Refract Metals Hard Mater, 77, 8, 10.1016/j.ijrmhm.2018.05.006 · DOI
  40. Fan, 2013, AlNiCrFexMo0.2CoCu high entropy alloys prepared by powder metallurgy, Rare Met. Mater. Eng., 42, 1127, 10.1016/S1875-5372(13)60074-0 · DOI
  41. Veronesi, 2015, Microwave-Assisted preparation of high entropy alloys, Technologies, 3, 182, 10.3390/technologies3040182 · DOI
  42. Qiu, 2016, Structure and properties of AlCrFeNiCuTi six principal elements equimolar alloy, J Alloys Compd, 658, 1, 10.1016/j.jallcom.2015.10.224 · DOI
  43. Colombini, 2018, High entropy alloys obtained by field assisted powder metallurgy route: SPS and microwave heating, Mater Chem Phys, 210, 78, 10.1016/j.matchemphys.2017.06.065 · DOI
  44. Zhang, 2016, Rapid preparation of AlCoCrFeNi high entropy alloy by spark plasma sintering from elemental powder mixture, Mater Lett, 181, 82, 10.1016/j.matlet.2016.06.014 · DOI
  45. Veronesi, 2017, Microwave processing of high entropy alloys: A powder metallurgy approach, Chem. Eng. Process. Process Intensif., 122, 397, 10.1016/j.cep.2017.02.016 · DOI
  46. Holmström, 2018, High entropy alloys: substituting for cobalt in cutting edge technology, Appl. Mater. Today, 12, 322, 10.1016/j.apmt.2018.07.001 · DOI
  47. Waseem, 2018, The effect of Ti on the sintering and mechanical properties of refractory high-entropy alloy TixWTaVCr fabricated via spark plasma sintering for fusion plasma-facing materials, Mater Chem Phys, 210, 87, 10.1016/j.matchemphys.2017.06.054 · DOI
  48. Yusenko, 2018, High-pressure high-temperature tailoring of High Entropy Alloys for extreme environments, J Alloys Compd, 738, 491, 10.1016/j.jallcom.2017.12.216 · DOI
  49. Zhou, 2019, High entropy alloy: a promising matrix for high-performance tungsten heavy alloys, J Alloys Compd, 777, 1184, 10.1016/j.jallcom.2018.11.089 · DOI
  50. Zhu, 2014, Early high-temperature oxidation behavior of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder Gang, Int. J. of Refractory Met. Hard Mater.
  51. Real, 2018, Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy, 746, 1
  52. Liu, 2019, Formation of transition layer and its effect on mechanical properties of AlCoCrFeNi high-entropy alloy/Al composites, J Alloys Compd, 780, 558, 10.1016/j.jallcom.2018.11.364 · DOI
  53. Abbaszadeh, 2020, Investigation of the high-temperature oxidation behavior of the Al0.5CoCrFeNi high entropy alloy, Surface Interfac, 21, 100724, 10.1016/j.surfin.2020.100724 · DOI
  54. Son, 2021, Superior antifouling properties of a CoCrFeMnNi high-entropy alloy, Mater Lett, 300, 130130, 10.1016/j.matlet.2021.130130 · DOI
  55. Yin, 2019, Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying, J Mater Sci Technol, 35, 1003, 10.1016/j.jmst.2018.12.015 · DOI
  56. Kuwabara, 2018, Mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy fabricated with selective electron beam melting, Addit. Manuf., 23, 264
  57. Li, 2019, Additive manufacturing of high-strength CrMnFeCoNi high-entropy alloys-based composites with WC addition, J Mater Sci Technol, 35, 2430, 10.1016/j.jmst.2019.05.062 · DOI
  58. Gu, 2020, Microstructure and properties of MgMoNbFeTi2Yx high entropy alloy coatings by laser cladding, Surf Coating Technol, 402, 126303, 10.1016/j.surfcoat.2020.126303 · DOI
  59. Geng, 2021, Nano-coupled heterostructure induced excellent mechanical and tribological properties in AlCoCrFeNi high entropy alloy, Tribol Int, 154, 106662, 10.1016/j.triboint.2020.106662 · DOI
  60. Rogal, 2017, Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy, J Alloys Compd, 708, 344, 10.1016/j.jallcom.2017.02.274 · DOI
  61. Zhang, 2017, Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite, Mater Des, 114, 253, 10.1016/j.matdes.2016.11.072 · DOI
  62. Guirong, 2021, Effects of boron on microstructure and properties of microwave sintered FeCoNi1.5CuY0.2 high-entropy alloy, J Alloys Compd, 866, 157848, 10.1016/j.jallcom.2020.157848 · DOI
  63. Rao, 2017, Microstructure, mechanical properties, and oxidation behavior of AlxCr0.4CuFe0.4MnNi high entropy alloys, Adv Eng Mater, 19, 1, 10.1002/adem.201600726 · DOI
  64. Varalakshmi, 2008, Synthesis and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying, J Alloys Compd, 460, 253, 10.1016/j.jallcom.2007.05.104 · DOI
  65. Koch, 2017, Nanocrystalline high-entropy alloys, J Mater Res, 32, 3435, 10.1557/jmr.2017.341 · DOI
  66. Sharma, 2018, High-entropy alloys and metallic nanocomposites: processing challenges, microstructure development and property enhancement, Mater Sci Eng R Rep, 131, 1, 10.1016/j.mser.2018.04.003 · DOI
  67. Vaidya, 2019, High-entropy alloys by mechanical alloying: A review, J Mater Res, 34, 664, 10.1557/jmr.2019.37 · DOI
  68. Suryanarayana, 2003, Mechanical alloying for advanced materials, Mater. Sci. Technol. 2003 Meet., 169
  69. Suñol, 2021, Mechanical alloying: processing and materials, Metals, 11, 10, 10.3390/met11050798 · DOI
  70. Gilman, 1990, Mechanical alloying, J Jpn Inst Light Metals, 40, 850, 10.2464/jilm.40.850 · DOI
  71. Suryanarayana, 2019, Mechanical alloying: a novel technique to synthesize advanced materials, Research, 2019, 1, 10.34133/2019/4219812 · DOI
  72. Suryanarayana, 2013, Progress in materials science mechanically alloyed nanocomposites, Prog Mater Sci, 58, 383, 10.1016/j.pmatsci.2012.10.001 · DOI
  73. Murty, 2013, Novel materials synthesis by mechanical alloying/milling, International Materials Reviews, 6608
  74. Tong, 2018, Different-shaped ultrafine MoNbTaW HEA powders prepared via mechanical alloying, Materials, 10, 1
  75. Shivam, 2018, Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy, J Alloys Compd, 757, 87, 10.1016/j.jallcom.2018.05.057 · DOI
  76. Lesz, 2021, Characteristics of the Mg-Zn-Ca-Gd Alloy after Mechanical Alloying, Materials, 1
  77. Amini, 2021, First-time synthesis of an unparalleled Al72Cr15Ni13 decagonal quasicrystalline phase with the help of mechanical alloying and annealing procedures: a comparative study, Powder Technol, 389, 243, 10.1016/j.powtec.2021.05.026 · DOI
  78. He, 2021, Bimodal-grained high-strength nickel-base ODS alloy fabricated by mechanical alloying and hot extrusion, Mater Today Commun, 26, 101921, 10.1016/j.mtcomm.2020.101921 · DOI
  79. Prashanth, 2021, A comprehensive exploration on the development of nano Y2O3 dispersed in AA 7017 by mechanical alloying and hot-pressing technique, Ceram Int, 47, 22924, 10.1016/j.ceramint.2021.05.006 · DOI
  80. Hrapkowicz, 2021, Mechanical alloying of Mg-Zn-Ca-Er alloy, XX, 1
  81. Ammar, 2021, Investigation of the microstructure and compressibility of biodegradable fe-mn-cu/w/co nanostructured alloy powders synthesized by mechanical alloying, Materials, 14, 10.3390/ma14113088 · DOI
  82. Shivam, 2020, Evolution of phases, hardness and magnetic properties of AlCoCrFeNi high entropy alloy processed by mechanical alloying, J Alloys Compd, 832, 154826, 10.1016/j.jallcom.2020.154826 · DOI
  83. Praveen, 2013, vol. 65, 1797
  84. Alcalá, 2018, Effects of milling time, sintering temperature, Al content on the chemical nature, microhardness and microstructure of mechanochemically synthesized FeCoNiCrMn high entropy alloy, J Alloys Compd, 10.1016/j.jallcom.2018.03.358 · DOI
  85. Zhao, 2018, Effect of Co content on the phase transition and magnetic properties of Co x CrCuFeMnNi high-entropy alloy powders, J Magn Magn Mater, 10.1016/j.jmmm.2018.07.072 · DOI
  86. Wang, 2017, Author ’ s accepted manuscript, Mater Sci Eng, 55
  87. Raza, 2018, PT CR, Mater Des
  88. Yadav, 2017, Wear behaviour of high entropy alloys containing soft dispersoids (Pb, Bi), Mater Chem Phys, 822, 153642
  89. Tian, 2018, Microstructural evolution of AlCoCrFeNiSi high-entropy alloy powder during mechanical alloying and its coating performance, Materials, 11, 10.3390/ma11020320 · DOI
  90. Wang, 2018, Alloying behavior and properties of - FeSiBAlNiCo x high entropy alloys fabricated by mechanical alloying and spark plasma sintering, Met Mater Int, 24, 1099, 10.1007/s12540-018-0047-1 · DOI
  91. Praveen, 2012, Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys, Mater Sci Eng, 534, 83, 10.1016/j.msea.2011.11.044 · DOI
  92. Zhang, 2018, A new mechanism for improving electromagnetic properties based on tunable crystallographic powders †, RSC Adv, 8, 14936, 10.1039/C8RA01762J · DOI
  93. Murali, 2018, Processing and characterisation of nano crystalline AlCoCrCuFeTi x high-entropy alloy, Powder Metall, 1
  94. Lu, 2018, The influence of nanocrystalline CoNiFeAl0.4Ti0.6Cr0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiCp/7075Al composites, vol. 726, 126
  95. Moravcik, 2017, Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering, Mater Des, 119, 141, 10.1016/j.matdes.2017.01.036 · DOI
  96. Cheng, 2018, Effect of Ti and C additions on the microstructure and mechanical properties of the FeCoCrNiMn high-entropy alloy, Mater Sci Eng, 719, 192, 10.1016/j.msea.2018.02.040 · DOI
  97. Mishra, 2017, Phase evolution and magnetic characteristics of TiFeNiCr and TiFeNiCrM (M = Mn, Co) high entropy alloys, J Magn Magn Mater, 442, 218, 10.1016/j.jmmm.2017.06.124 · DOI
  98. Gómez-Esparza, 2016, Series of nanocrystalline NiCoAlFe(Cr, Cu, Mo, Ti) high-entropy alloys produced by mechanical alloying, Mater Res, 19, 39, 10.1590/1980-5373-mr-2015-0668 · DOI
  99. Ge, 2017, Characterization and properties of CuZrAlTiNi high entropy alloy coating obtained by mechanical alloying and vacuum hot pressing sintering, Adv Powder Technol, 28, 2556, 10.1016/j.apt.2017.07.006 · DOI
  100. Oleszak, 2018, High entropy multicomponent WMoNbZrV alloy processed by mechanical alloying, Mater Lett, 232, 160, 10.1016/j.matlet.2018.08.060 · DOI
  101. Karthik, 2017, Additive manufacturing of an aluminum matrix composite reinforced with nanocrystalline high-entropy alloy particles, Mater Sci Eng, 679, 193, 10.1016/j.msea.2016.10.038 · DOI
  102. Nam, 2018, Strengthening of Al0.15CoCrCuFeNiTix–C (x = 0, 1, 2) high-entropy alloys by grain refinement and using nanoscale carbides via powder metallurgical route, J Alloys Compd, 762, 29, 10.1016/j.jallcom.2018.05.180 · DOI
  103. Kang, 2018, Microstructure, mechanical property and Hall-Petch relationship of a light-weight refractory Al0.1CrNbVMo high entropy alloy fabricated by powder metallurgical process, J Alloys Compd, 767, 1012, 10.1016/j.jallcom.2018.07.145 · DOI
  104. Sun, 2018, A new type of high entropy alloy composite Fe18Ni23Co25Cr21Mo8WNb3C2 prepared by mechanical alloying and hot pressing sintering, Mater Sci Eng, 728, 144, 10.1016/j.msea.2018.05.022 · DOI
  105. Long, 2018, Enhanced strength of a mechanical alloyed NbMoTaWVTi refractory high entropy alloy, Materials, 11, 1, 10.3390/ma11050669 · DOI
  106. Joo, 2017, Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering, J Alloys Compd, 698, 591, 10.1016/j.jallcom.2016.12.010 · DOI
  107. Alijani, 2019, Study on phase formation in magnetic FeCoNiMnV high entropy alloy produced by mechanical alloying, J Alloys Compd, 773, 623, 10.1016/j.jallcom.2018.09.204 · DOI
  108. Yurkova, 2019, Structure formation and mechanical properties of the high-entropy AlCuNiFeCr alloy prepared by mechanical alloying and spark plasma sintering, J Alloys Compd, 786, 139, 10.1016/j.jallcom.2019.01.341 · DOI
  109. Cheng, 2018, Microstructure and mechanical properties of FeCoCrNiMn high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering, Trans. Nonferrous Met. Soc. China (English Ed., 28, 1360, 10.1016/S1003-6326(18)64774-0 · DOI
  110. Ajay Kumar, 2018, Synthesis of FeCrVNbMn high entropy alloy by mechanical alloying and study of their microstructure and mechanical properties, Miner. Met. Mater. Ser., Part F12, 669
  111. Wang, 2019, Synthesis and thermal stability of a nanocrystalline MoNbTaTiV refractory high-entropy alloy via mechanical alloying, Int J Refract Metals Hard Mater, 84, 104988, 10.1016/j.ijrmhm.2019.104988 · DOI
  112. Das, 2018, Mechanical alloying of W-Mo-V-Cr-Ta high entropy alloys, IOP Conf Ser Mater Sci Eng, 346
  113. Sun, 2019, Phases, microstructures and mechanical properties of CoCrNiCuZn high-entropy alloy prepared by mechanical alloying and spark plasma sintering, Entropy, 21, 10.3390/e21020122 · DOI
  114. Kumar, 2018, Phase evolution and mechanical properties of AlCoCrFeNiSix high-entropy alloys synthesized by mechanical alloying and spark plasma sintering, J Mater Eng Perform, 27, 3304, 10.1007/s11665-018-3409-4 · DOI
  115. Abbasi, 2019, Phase prediction and microstructure of centrifugally cast non-equiatomic Co-Cr-Fe-Mn-Ni(Nb,C) high entropy alloys, J Alloys Compd, 783, 292, 10.1016/j.jallcom.2018.12.329 · DOI
  116. Zhang, 2014, Microstructures and properties of high-entropy alloys, Prog Mater Sci, 61, 1, 10.1016/j.pmatsci.2013.10.001 · DOI
  117. Takeuchi, 2014, High-entropy alloys with a hexagonal close-packed structure designed by equi-atomic alloy strategy and binary phase diagrams, JOM (J Occup Med), 66, 1984
  118. Zhang, 2014, Guidelines in predicting phase formation of high-entropy alloys, MRS Commun., 4, 57, 10.1557/mrc.2014.11 · DOI
  119. Chanda, 2018, composition dependence on the evolution of nanoeutectic in CoCrFeNiNb x (0.45 ≤ x ≤ 0.65) high entropy alloys, Adv Eng Mater, 20, 1700908, 10.1002/adem.201700908 · DOI
  120. Yang, 2014, Phase stability of low-density, multiprincipal component alloys containing aluminum, magnesium, and lithium, JOM (J Occup Med), 66, 2009
  121. Chen, 2006, No title, Sci. Mater., 31, 360
  122. Li, 2009, Effect of alloying elements on microstructure and properties of multiprincipal elements high-entropy alloys, J Alloys Compd, 475, 752, 10.1016/j.jallcom.2008.07.124 · DOI
  123. Zhou, 2007, Solid solution alloys of AlCoCrFeNi Tix with excellent room-temperature mechanical properties, Appl Phys Lett, 90, 10.1063/1.2734517 · DOI
  124. Li, 2017, Composition dependence of structure, physical and mechanical properties of FeCoNi(MnAl)x high entropy alloys, Intermetallics, 87, 21, 10.1016/j.intermet.2017.04.007 · DOI
  125. Chen, 2019, Interface and heterostructure design in polyelemental nanoparticles, Science, 363, 959, 10.1126/science.aav4302 · DOI
  126. Chen, 2015, Polyelemental nanoparticle libraries, Nanoscale, 352, 5
  127. Yao, 2018, Carbothermal shock synthesis of high-entropy-alloy nanoparticles, Science, 359, 1489, 10.1126/science.aan5412 · DOI
  128. Santodonato, 2015, Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy, Nat Commun, 6, 10.1038/ncomms6964 · DOI
  129. Glasscott, 2021, Mapping solvent entrapment in multiphase systems by electrogenerated chemiluminescence, Langmuir, 37, 2907, 10.1021/acs.langmuir.0c03445 · DOI
  130. Shi, 2017, Corrosion of Al xCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior, Corrosion Sci, 119, 33, 10.1016/j.corsci.2017.02.019 · DOI
  131. Huang, 2019, Lightweight AlCrTiV high-entropy alloys with dual-phase microstructure via microalloying, J Mater Sci, 54, 2271, 10.1007/s10853-018-2970-4 · DOI
  132. Coury, 2019, Solid-solution strengthening in refractory high entropy alloys, Acta Mater, 175, 66, 10.1016/j.actamat.2019.06.006 · DOI
  133. Wu, 2020, Influence of Cr content on the microstructure and mechanical properties of CrxFeNiCu high entropy alloys, Prog. Nat. Sci. Mater. Int., 30, 239, 10.1016/j.pnsc.2020.01.012 · DOI
  134. Youssef, 2014, A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures, Mater. Res. Lett., 3, 95, 10.1080/21663831.2014.985855 · DOI
  135. Feuerbacher, 2018, A single-phase bcc high-entropy alloy in the refractory Zr-Nb-Ti-V-Hf system, Scripta Mater, 152, 40, 10.1016/j.scriptamat.2018.04.009 · DOI
  136. Lu, 2018, Bidirectional transformation enables hierarchical nanolaminate dual-phase high-entropy alloys, Adv Mater, 30, 1, 10.1002/adma.201804727 · DOI
  137. Yao, 2014, A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility, Scripta Mater, 72–73, 5, 10.1016/j.scriptamat.2013.09.030 · DOI
  138. Huang, 2016, Mechanism of magnetic transition in FeCrCoNi-based high entropy alloys, Mater Des, 103, 71, 10.1016/j.matdes.2016.04.053 · DOI
  139. Nayan, 2014, Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy, Intermetallics, 55, 145, 10.1016/j.intermet.2014.07.019 · DOI
  140. Wang, 2012, Effects of Al addition on the microstructure and mechanical property of Al xCoCrFeNi high-entropy alloys, Intermetallics, 26, 44, 10.1016/j.intermet.2012.03.005 · DOI
  141. Tong, 2005, Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metall. Mater. Trans., 36, 1263, 10.1007/s11661-005-0218-9 · DOI
  142. Zakeri, 2012, 15, 891
  143. Polanski, 2014, Why the ball to powder ratio (BPR) is insufficient for describing the mechanical ball milling process, Int. J. Hydrogen Energy, 9, 1
  144. Real, 2019, Effects of the speed ratio on the e fficiency of planetary mills, Heliyon, 5
  145. Manea, 2019, HfNbTaTiZr high entropy alloy processed by mechanical alloying, UPB Sci. Bull. Ser. B Chem. Mater. Sci., 81, 201
  146. Semen’Ko, 2017, Synthesis and characterization of nanocrystalline CrFeCoNi alloy by high energetic mechanical alloying, Proc. 2017 IEEE 7th Int. Conf. Nanomater. Appl. Prop. N, 2017-Janua, 7
  147. Salemi, 2016, Synthesis and thermodynamic analysis of nanostructured CuNiCoZnAl high entropy alloy produced by mechanical alloying, J Alloys Compd, 685, 278, 10.1016/j.jallcom.2016.05.274 · DOI
  148. Tan, 2016, Effects of milling on the microstructure and hardness of Al2NbTi3V2Zr high-entropy alloy, Mater Des, 109, 27, 10.1016/j.matdes.2016.07.066 · DOI
  149. Fourmont, 2020, Effects of planetary ball milling on AlCoCrFeNi high entropy alloys prepared by Spark Plasma Sintering : Experiments and molecular dynamics study, Elsevier, 820. April, 153448
  150. Song, 2021, Effect of milling duration on oxide-formation behavior of oxide-dispersion-strengthened high-entropy alloys, Arch Metall Mater, 66, 735, 10.24425/amm.2021.136371 · DOI
  151. Akhlaghi, 2021, The effect of processing parameters and heat-treatment on the microstructure and mechanical properties of PM CoCrFeMnNiTi 0. 1 high-entropy alloy, Mater Chem Phys, 257, 123722, 10.1016/j.matchemphys.2020.123722 · DOI
  152. Baldenebro-Lopez, 2015, Simultaneous effect of mechanical alloying and arc-melting processes in the microstructure and hardness of an AlCoFeMoNiTi high-entropy alloy, J Alloys Compd, 643, S250, 10.1016/j.jallcom.2014.12.059 · DOI
  153. Parakh, 2021, Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy, J Alloys Compd, 863, 158056, 10.1016/j.jallcom.2020.158056 · DOI
  154. Geng, 2020, Microstructure, mechanical and vacuum high temperature tribological properties of AlCoCrFeNi high entropy alloy based solid-lubricating composites, Tribol Int, 151, 106444, 10.1016/j.triboint.2020.106444 · DOI
  155. Duan, 2020, Optimizing the electromagnetic properties of the FeCoNiAlCrx high entropy alloy powders by composition adjustment and annealing treatment, J Magn Magn Mater, 497, 165947, 10.1016/j.jmmm.2019.165947 · DOI
  156. Suryanarayana, 2001, Mechanical alloying and milling, Prog Mater Sci, 46, 1, 10.1016/S0079-6425(99)00010-9 · DOI
  157. Shaw, 2003, Effects of process-control agents on mechanical alloying of nanostructured aluminum alloys, Metall. Mater. Trans., 34, 159, 10.1007/s11661-003-0217-7 · DOI
  158. Ruiz-Esparza-Rodríguez, 2021, Influence of process control agent and Al concentration on synthesis and phase stability of a mechanically alloyed AlxCoCrFeMnNi high-entropy alloy, J Alloys Compd, 882, 10.1016/j.jallcom.2021.160770 · DOI
  159. Lee, 1996, The effects of process control agents on mechanical alloying mechanisms in the Ti-Al system, J Alloys Compd, 6, 193, 10.1016/0925-8388(96)02224-4 · DOI
  160. Lu, 1999, 290, 279
  161. Ju, 2007, 435, 472
  162. Yadav, 2018, Wear behavior of high entropy alloys containing soft dispersoids (Pb, Bi), Mater Chem Phys, 210, 222, 10.1016/j.matchemphys.2017.06.020 · DOI
  163. Jin, 2018, Applied Surface Science High temperature wear performance of laser-cladded FeNiCoAlCu high- entropy alloy coating, Appl Surf Sci, 445, 113, 10.1016/j.apsusc.2018.03.135 · DOI
  164. Li, 2019, 252, 88
  165. Long, 2021, High entropy alloy borides prepared by powder metallurgy process and the enhanced fracture toughness by addition of yttrium, Mater Chem Phys, 257, 123715, 10.1016/j.matchemphys.2020.123715 · DOI
  166. Praveen, 2014, Effect of molybdenum and niobium on the phase formation and hardness of nanocrystalline CoCrFeNi high entropy alloys, J Nanosci Nanotechnol, 14, 8106, 10.1166/jnn.2014.9441 · DOI
  167. Wang, 2018, Microstructure and mechanical properties of non-equilibrium solidified CoCrFeNi high entropy alloy, Mater Chem Phys, 210, 192, 10.1016/j.matchemphys.2017.06.037 · DOI
  168. Mohanty, 2017, Powder metallurgical processing of equiatomic AlCoCrFeNi high entropy alloy: microstructure and mechanical properties, Mater Sci Eng, 679, 299, 10.1016/j.msea.2016.09.062 · DOI
  169. Zhu, 2010, Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloys, Mater Sci Eng, 527, 6975, 10.1016/j.msea.2010.07.028 · DOI
  170. Kang, 2018, Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process, Mater Sci Eng, 712, 616, 10.1016/j.msea.2017.12.021 · DOI
  171. Fu, 2015, Microstructure and mechanical behavior of a novel Co20Ni20Fe20Al20Ti20 alloy fabricated by mechanical alloying and spark plasma sintering, Mater Sci Eng, 644, 10, 10.1016/j.msea.2015.07.052 · DOI
  172. Moravcik, 2018, Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy, Scripta Mater, 157, 24, 10.1016/j.scriptamat.2018.07.034 · DOI
  173. Fu, 2016, Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy, Acta Mater, 107, 59, 10.1016/j.actamat.2016.01.050 · DOI
  174. Liu, 2016, Intermetallics Preparation of super fi ne-grained high entropy alloy by spark plasma sintering gas atomized powder, Intermetallics, 68, 16, 10.1016/j.intermet.2015.08.012 · DOI
  175. Ji, 2014, Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy alloy, J Alloys Compd, 589, 61, 10.1016/j.jallcom.2013.11.146 · DOI
  176. Fan, 2014, The microstructure and properties of (FeCrNiCo)AlxCuy high-entropy alloys and their TiC-reinforced composites, Mater Sci Eng, 598, 244, 10.1016/j.msea.2014.01.044 · DOI
  177. Tsai, 2010, 490, 160
  178. Hou, 2017, Materials Science & Engineering A Strengthening in Al 0. 25 CoCrFeNi high-entropy alloys by cold rolling, Mater Sci Eng, 707, 593, 10.1016/j.msea.2017.09.089 · DOI
  179. Chen, 2013, Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy, Mater Des, 51, 854, 10.1016/j.matdes.2013.04.061 · DOI
  180. Wang, 2008, Microstructure and compressive properties of AlCrFeCoNi high entropy alloy, Mater Sci Eng, 491, 154, 10.1016/j.msea.2008.01.064 · DOI
  181. Liu, 2016, Intermetallics Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion, Intermetallics, 75, 25, 10.1016/j.intermet.2016.05.006 · DOI
  182. Chen, 2019, Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles, Mater Sci Eng, 762, 138116, 10.1016/j.msea.2019.138116 · DOI
  183. Ko, 2018, Microstructural evolution and mechanical performance of carbon-containing CoCrFeMnNi-C high entropy alloys, J Alloys Compd, 743, 115, 10.1016/j.jallcom.2018.01.348 · DOI
  184. Cheng, 2019, Microstructure and mechanical properties of FeCoCrNiMnAlx high-entropy alloys prepared by mechanical alloying and hot-pressed sintering, J Alloys Compd, 775, 742, 10.1016/j.jallcom.2018.10.168 · DOI
  185. Zhuang, 2018, Effect of molybdenum on phases, microstructure and mechanical properties of Al0.5CoCrFeMoxNi high entropy alloys, J Alloys Compounds, 743. Elsevier, 514, 10.1016/j.jallcom.2018.02.003 · DOI
  186. Alcalá, 2018, Effects of milling time, sintering temperature, Al content on the chemical nature, microhardness and microstructure of mechanochemically synthesized FeCoNiCrMn high entropy alloy, J Alloy Compound, 749 (June), 834, 10.1016/j.jallcom.2018.03.358 · DOI
  187. Pan, 2018, Microstructure and mechanical properties of Nb25Mo25Ta25W25 and Ti8Nb23Mo23Ta23W23 high entropy alloys prepared by mechanical alloying and spark plasma sintering, Mater Sci Eng, 738, 362, 10.1016/j.msea.2018.09.089 · DOI
  188. Haché, 2020, Nanostructured high-entropy materials, J Mater Res, 35, 1051, 10.1557/jmr.2020.33 · DOI
  189. Gao, 2017, Microstructure, mechanical and corrosion behaviors of CoCrFeNiAl 0.3 High Entropy Alloy (HEA) films, Coatings, 7, 1, 10.3390/coatings7100156 · DOI
  190. Dang, 2018, Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating, Front. Mater., 5, 1
  191. Fu, 2013, Alloying behavior and deformation twinning in a CoNiFeCrAl 0.6Ti0.4 high entropy alloy processed by spark plasma sintering, J Alloys Compd, 553, 316, 10.1016/j.jallcom.2012.11.146 · DOI
  192. Ji, 2015, Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering, Intermetallics, 56, 24, 10.1016/j.intermet.2014.08.008 · DOI
  193. Wu, 2020, Co - free high - entropy alloys powders immobilized by electrospray and microfluidics for decolorization of azo dye, Acta Metall. Sin. (English Lett., 33, 1103, 10.1007/s40195-019-00997-x · DOI
  194. Kunce, 2013, Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS), Int J Hydrogen Energy, 38, 12180, 10.1016/j.ijhydene.2013.05.071 · DOI
  195. Ulmer, 2014, Effect of oxygen on the microstructure and hydrogen storage properties of V-Ti-Cr-Fe quaternary solid solutions, International Journal of Hydrogen Energy, 39, 20000, 10.1016/j.ijhydene.2014.08.152 · DOI
  196. Kao, 2010, Hydrogen storage properties of multi-principal-component CoFeMnTixVyZrz alloys, Int J Hydrogen Energy, 35, 9046, 10.1016/j.ijhydene.2010.06.012 · DOI
  197. Kunce, 2014, ScienceDirect Microstructure and hydrogen storage properties of a TiZrNbMoV high entropy alloy synthesized using Laser Engineered Net Shaping (LENS), Int J Hydrogen Energy, 39, 9904, 10.1016/j.ijhydene.2014.02.067 · DOI
  198. Xia, 2015, Irradiation Resistance in Al x CoCrFeNi High Entropy Alloys, JOM, 67, 2340, 10.1007/s11837-015-1568-4 · DOI
  199. Egami, 2014, Irradiation Resistance of Multicomponent Alloys, Metall. Mater. Trans., 45, 180, 10.1007/s11661-013-1994-2 · DOI
  200. Yang, 2019, Journal of Materials Science & Technology High He-ion irradiation resistance of CrMnFeCoNi high-entropy alloy revealed by comparison study with Ni and 304SS, J Mater Sci Technol, 35, 300, 10.1016/j.jmst.2018.09.050 · DOI

200 of 230 shown

Cited by

Sorted by citations

Metadata

Authors
Kumar, A., Singh, A., & Suhane, A.
Affiliations
Maulana Azad National Institute of Technology (IN)
Corresponding author
Kumar, Akshay
ORCID
Venue
Journal of Materials Research and Technology
Publisher
Elsevier BV
Published
2022-03
Volume
17
Pages
2431-2456
ISSN
  • 2214-0697 (ISSN-L)
  • 2238-7854
DOI
10.1016/j.jmrt.2022.01.141
OpenAlex
W4210505445
Cited by
294
References
1
Citations by year
2026: 68 · 2025: 85 · 2024: 78 · 2023: 48 · 2022: 15
FWCI
21.31
Type
journal article
Language
en
Open access
Licence
Locations
  • Journal of Materials Research and Technology (publishedVersion, cc-by-nc-nd)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
  • Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
  • Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
Keywords
high-entropy alloys, mechanical alloying, non-equiatomic alloys, sintering, functional properties, alloy applications

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review