The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: a review
Open accessAbstract
Bamboo fiber has attracted a lot of interest due to its high specific strength and renewability. Unidirectional long bamboo fiber reinforcing is essential to fully realize its strength. The reinforcing efficiency can also be affected by the physical and chemical structure of bamboo fibers. Therefore, this study reviews the cell wall structure of the bamboo fiber. The alternately arranged structure with thin and thick layers contributes substantially to the mechanical strength of the bamboo fiber. In addition, this study evaluates the mechanical properties, water absorption, and flame retardancy of polymeric and cementitious composites reinforced with long bamboo fibers. Thermoset polymer-based bamboo fiber composites typically show higher mechanical strength than thermoplastic-based fiber composites. Chemical treatment and flame retardant can significantly enhance the hydrophobicity and flame retardancy of fiber composites, respectively. Because of its superior interface performance, the short bamboo fiber has a greater reinforcing effect in cement mortar than in concrete. This study can serve as a reference for further investigations on bamboo fiber/bundle reinforced composites and promote their applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335
The wood from the trees: The use of timber in construction
Ramage, M. H., Burridge, H., Busse-Wicher, M., Fereday, G., Reynolds, T., Shah, D. U., Wu, G., Yu, L., Fleming, P., Densley-Tingley, D., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.107 · Cited by 1,402
Fundamental Factors Affecting Biomass Enzymatic Reactivity
Chang, V. S., & Holtzapple, M. T. (2000) · Applied Biochemistry and Biotechnology · doi:10.1385/abab:84-86:1-9:5 · Cited by 1,176
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
Baley, C. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00040-4 · Cited by 1,066
Bamboo fibre reinforced biocomposites: A review
Abdul Khalil, H. P. S., Bhat, I. U. H., Jawaid, M., Zaidon, A., Hermawan, D., & Hadi, Y. S. (2012) · Materials & Design · doi:10.1016/j.matdes.2012.06.015 · Cited by 835
Recent developments in the fire retardancy of polymeric materials
Dasari, A., Yu, Z.-Z., Cai, G.-P., & Mai, Y.-W. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.006 · Cited by 669
Engineered bamboo for structural applications
Sharma, B., Gatóo, A., Bock, M., & Ramage, M. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.077 · Cited by 666
Bamboo as reinforcement in structural concrete elements
Ghavami, K. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.06.002 · Cited by 609
Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites
Thwe, M. M., & Liao, K. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00225-7 · Cited by 576
Shah, D. U. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7458-7 · Cited by 532
Cell wall structural changes in wheat straw pretreated for bioethanol production
Kristensen, J. B., Thygesen, L. G., Felby, C., Jorgensen, H., & Elder, T. (2008) · Biotechnology for Biofuels · doi:10.1186/1754-6834-1-5 · Cited by 482
Development of vegetable fibre–mortar composites of improved durability
Tolêdo Filho, R. D., Ghavami, K., England, G. L., & Scrivener, K. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00018-5 · Cited by 482
A strong, tough, and scalable structural material from fast-growing bamboo
Li, Z., Chen, C., Mi, R., Gan, W., Dai, J., Jiao, M., Xie, H., Yao, Y., Xiao, S., & Hu, L. (2020) · Advanced Materials · doi:10.1002/adma.201906308 · Cited by 476
Mechanical properties of natural fibre reinforced polyester composites: Jowar, sisal and bamboo
Ratna Prasad, A. V., & Mohana Rao, K. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.03.015 · Cited by 425
Cellulose decomposition in hot-compressed water with alkali or nickel catalyst
Minowa, T., Zhen, F., & Ogi, T. (1998) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(98)00059-x · Cited by 387
Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction
Sedan, D., Pagnoux, C., Smith, A., & Chotard, T. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.05.019 · Cited by 376
Bamboo fiber-reinforced polypropylene composites: A study of the mechanical properties
Chen, X., Guo, Q., & Mi, Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980906)69:10<1891::aid-app1>3.0.co;2-9 · Cited by 317
Rana, A. K., Mandal, A., & Bandyopadhyay, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00267-1 · Cited by 314
Why are designers fascinated by flax and hemp fibre composites?
Pil, L., Bensadoun, F., Pariset, J., & Verpoest, I. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.11.004 · Cited by 282
Alginate/chitosan nanoparticles for encapsulation and controlled release of vitamin B2
Azevedo, M. A., Bourbon, A. I., Vicente, A. A., & Cerqueira, M. A. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.05.036 · Cited by 267
Extraction of bamboo fibers and their use as reinforcement in polymeric composites
Deshpande, A. P., Bhaskar Rao, M., & Lakshmana Rao, C. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000404)76:1<83::aid-app11>3.0.co;2-l · Cited by 257
Mechanical and flammability characterisations of biochar/polypropylene biocomposites
Das, O., Bhattacharyya, D., Hui, D., & Lau, K.-T. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.020 · Cited by 231
Behaviour of Single Wood Fibres under Axial Tensile Strain
PAGE, D. H., EL-HOSSEINY, F., & WINKLER, K. (1971) · Nature · doi:10.1038/229252a0 · Cited by 230
Chen, C., Li, Z., Mi, R., Dai, J., Xie, H., Pei, Y., Li, J., Qiao, H., Tang, H., Yang, B., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b08747 · Cited by 220
Silane treatment of bagasse fiber for reinforcement of cementitious composites
Bilba, K., & Arsène, M.-A. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.013 · Cited by 209
Bamboo—A functionally graded composite-correlation between microstructure and mechanical strength
Ray, A. K., Mondal, S., Das, S. K., et al. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-4419-9 · Cited by 209
Bamboo – An untapped plant resource for the phytoremediation of heavy metal contaminated soils
Bian, F., Zhong, Z., Zhang, X., Yang, C., & Gai, X. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2019.125750 · Cited by 201
Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties
Kumar, A., Vlach, T., Laiblova, L., Hrouda, M., Kasal, B., Tywoniak, J., & Hajek, P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.069 · Cited by 194
Lou, Z., Han, X., Liu, J., Ma, Q., Yan, H., Yuan, C., Yang, L., Han, H., Weng, F., & Li, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109335 · Cited by 191
Improving degradation resistance of sisal fiber in concrete through fiber surface treatment
Wei, J., & Meyer, C. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2013.11.024 · Cited by 186
Mechanical and damping performances of flax fibre composites – A review
Rahman, M. Z. (2021) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2020.100081 · Cited by 176
Self-citationKhalili, P., Tshai, K. Y., Hui, D., & Kong, I. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.01.049 · Cited by 175
Recyclable thermoset hyperbranched polymers containing reversible hexahydro-s-triazine
Xu, Z., Liang, Y., Ma, X., Chen, S., Yu, C., Wang, Y., Zhang, D., & Miao, M. (2019) · Nature Sustainability · doi:10.1038/s41893-019-0444-6 · Cited by 170
Bamboo and wood fibre cement composites for sustainable infrastructure regeneration
Sudin, R., & Swamy, N. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0224-3 · Cited by 160
Liu, H., Wu, Q., Han, G., Yao, F., Kojima, Y., & Suzuki, S. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.09.011 · Cited by 147
High-Performance Bamboo Steel Derived from Natural Bamboo
Wang, Y.-Y., Wang, X., Li, Y., Huang, P., Yang, B., Hu, N., & Fu, S. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18239 · Cited by 147
Synergistic flame retardancy effect of graphene nanosheets and traditional retardants on epoxy resin
Liu, S., Fang, Z., Yan, H., Chevali, V. S., & Wang, H. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.012 · Cited by 140
Effects of different thermal modification media on physical and mechanical properties of moso bamboo
Yang, T.-H., Lee, C., Lee, C., & Cheng, Y.-W. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.156 · Cited by 135
Effects of heat treatment on the properties of bamboo scrimber
Shangguan, W., Gong, Y., Zhao, R., & Ren, H. (2016) · Journal of Wood Science · doi:10.1007/s10086-016-1574-3 · Cited by 128
Pultrusion of a flax/polypropylene yarn
Angelov, I., Wiedmer, S., Evstatiev, M., et al. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2006.01.024 · Cited by 125
Das, M., & Chakraborty, D. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26155 · Cited by 122
Yu, Y., Jiang, Z., Fei, B., Wang, G., & Wang, H. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4806-8 · Cited by 115
Extruded short wool fibre composites: Mechanical and fire retardant properties
Kim, N. K., Lin, R., & Bhattacharyya, D. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.08.002 · Cited by 106
Highly-aligned cellulose fibers reinforced epoxy composites derived from bulk natural bamboo
Kalali, E. N., Hu, Y., Wang, X., Song, L., & Xing, W. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.063 · Cited by 96
Relationship between fiber chemical treatment and properties of recycled pp/bamboo fiber composites
Nguyen‐Tri, P., Sollogoub, C., & Guinault, A. (2010) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684410370905 · Cited by 79
Qian, S., Wang, H., Zarei, E., & Sheng, K. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.007 · Cited by 75
Hu, Y., Xu, P. Y., Gui, H., Wang, X., & Ding, Y. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.025 · Cited by 66
The use of bamboo fiber in reinforced concrete beam to reduce crack
Dewi, S. M., Wijaya, M. N., & Christin Remayanti, N. (2017) · AIP conference proceedings · doi:10.1063/1.5003486 · Cited by 64
Schirp, A., & Su, S. J. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.01.016 · Cited by 54
Study on the effect of carbon nanotubes on plastic composite reinforced with natural fiber
Kushwaha, P. K., Pandey, C. N., & Kumar, R. (2014) · Journal of the Indian Academy of Wood Science · doi:10.1007/s13196-014-0121-3 · Cited by 47
Yeh, C.-H., & Yang, T.-C. (2020) · Polymers · doi:10.3390/polym12030636 · Cited by 47
Flexural Properties of Long Bamboo Fiber/ PLA Composites
Ochi, S. (2015) · Open Journal of Composite Materials · doi:10.4236/ojcm.2015.53010 · Cited by 38
Peng, F., Fei, B., Yu, Y., Xiong, H., & Tan, J. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39846 · Cited by 36
Wang, H., Tian, G., Li, W., Ren, D., Zhang, X., & Yu, Y. (2015) · Journal of Wood Science · doi:10.1007/s10086-015-1466-y · Cited by 34
Swain, P. T. R., & Biswas, S. (2017) · Polymer Composites · doi:10.1002/pc.24294 · Cited by 28
Liu, W., Qiu, R., & Li, K. (2014) · Polymer Composites · doi:10.1002/pc.23333 · Cited by 26
Zhang, S., Yao, W., Zhang, H., & Sheng, K. (2018) · Polymer Composites · doi:10.1002/pc.24805 · Cited by 24
Cui, Y., Lee, S., & Tao, J. (2008) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.20169 · Cited by 21
The Fabrication and Properties Characterization of Wood‐Based Flame Retardant Composites
He, X., Li, X., Zhong, Z., Yan, Y., Mou, Q., Yao, C. J., & Wang, C. (2014) · Journal of Nanomaterials · doi:10.1155/2014/878357 · Cited by 21
Nonconventional Ca(OH)2 Treatment of Bamboo for the Reinforcement of Cement Composites
Sánchez-Echeverri, L. A., Medina, J., & Ganjian, E. (2020) · Materials · doi:10.3390/ma13081892 · Cited by 20
Kushwaha, P. K., & Kumar, R. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32466 · Cited by 17
Assessment of physical and mechanical properties of bamboo–plastic composites
Bari, E., Morrell, J. J., Sistani, A., Firoozbehi, F., Haghdoost, Y., Ashrafi, M. N., & Ghorbani, A. (2018) · Polymer Composites · doi:10.1002/pc.25097 · Cited by 13
Density Variation due to Polylactic Acid of Long Bamboo Fibres
Sinha, R. K., Purohit, R., & Mishra, V. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.06.401 · Cited by 7
Metadata
- Authors
- Gao, X., Zhu, D., Fan, S., Rahman, M. Z., Guo, S., & Chen, F.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2022-07
- Volume
- 19
- Pages
- 1162-1190
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W4280558116
- Cited by
- 281
- References
- 64
- FWCI
- 17.57
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.