The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Improved mechanical and electrical properties of copper-aluminum joints with highly aligned graphene reinforcement via friction stir spot welding
Abstract
This study demonstrates the potential of friction stir spot welding (FSSW) for producing highly aligned graphene configurations in copper-aluminum joints, resulting in improved mechanical and electrical properties. Pure copper and AA6061 sheet were welded with 0.5% graphene nanoparticles dispersed in ethanol drop cast at the interface. Under optimized experimental conditions, adding a graphene interlayer results in a 15.6% increase in maximum shear strength, a 46% increase in hardness value, and a 23% reduction in joint electrical resistance. Transmission electron microscopy confirmed that the laminar flow behavior of the material aligns the graphene nanoparticles parallel to the tool surface direction. The mechanical improvements are attributed to the reduction of grain size and the plastic incompatibilities that arise at the metal-graphene interface. The highly aligned graphene configuration provides more conductive paths and acts as a bridge between grains to reduce grain boundary resistance, reducing electrical resistance. These findings pave the way for exploring the possibilities of utilizing the anisotropic properties of graphene in material joining applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., Robson, J. D., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100752 · Cited by 1,048
Recent progress on control strategies for inherent issues in friction stir welding
Meng, X., Huang, Y., Cao, J. H., Shen, J., & dos Santos, J. F. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100706 · Cited by 666
Effects of graphene content on the microstructure and properties of copper matrix composites
Chen, F., Ying, J., Wang, Y., Du, S., Liu, Z., & Huang, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.10.023 · Cited by 519
Sato, Y. S., Urata, M., & Kokawa, H. (2002) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-002-0124-3 · Cited by 473
Ultrahigh Electrical Conductivity of Graphene Embedded in Metals
Cao, M., Xiong, D., Yang, L., Li, S., Xie, Y., Guo, Q., Li, Z., Adams, H., Gu, J., Fan, T., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806792 · Cited by 330
Welding techniques for battery cells and resulting electrical contact resistances
Brand, M. J., Schmidt, P. A., Zaeh, M. F., & Jossen, A. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.04.001 · Cited by 248
Understanding the material flow path of friction stir welding process using unthreaded tools
Lorrain, O., Favier, V., Zahrouni, H., & Lawrjaniec, D. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.11.005 · Cited by 202
Advances in friction stir spot welding
Shen, Z., Ding, Y., & Gerlich, A. P. (2019) · Critical reviews in solid state and materials sciences/CRC critical reviews in solid state and materials sciences · doi:10.1080/10408436.2019.1671799 · Cited by 200
High strain rate superplasticity via friction stir processing (FSP): A review
Mirzadeh, H. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.141499 · Cited by 174
Material flow during friction stir spot welding
Yang, Q., Mironov, S. Y., Sato, Y. S., & Okamoto, K. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.03.082 · Cited by 165
Research works printed but not linked: 2
- Sharma, 2021, vol. 31
- Meng, 2021, Recent progress on control strategies for inherent issues in friction stir welding, Prog Mater Sci, 115, 10.1016/j.pmatsci.2020.100706 · DOI
Cited by
Mechanism of ultrasonic effects on thermal-stress field in Cu/Al-FSW process
Zhao, W., Zhu, Y., Liu, Z., Fu, A., & He, H. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.109101 · Cited by 35
Singh, R., Arora, N., & Choudhary, A. (2026) · Welding in the World · doi:10.1007/s40194-026-02375-5 · Cited by 6
“To avoid direct contact and lessen the production of IMCs, research has also looked into the insertion of an intermediate layer of a third element between Al and Cu, such as graphene [26], zinc (Zn) [27] or nickel (Ni) [28, 29].”
Metadata
- Authors
- Mohd Isa, M. S., Muhamad, M. R., Yusof, F., Yusoff, N., Brytan, Z., Suga, T., Morisada, Y., & Fujii, H.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2023-05
- Volume
- 24
- Pages
- 9203-9215
- ISSN
- 2238-7854
- Cited by
- 22
- References
- 56
- Language
- en
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- creativecommons.org/licenses/by/4.0/ (vor, 16 d)
- Funders
- Universiti Malaya (GPF062A-2020, GPF062B-2020)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improved mechanical and electrical properties of copper-aluminum joints with highly aligned graphene reinforcement via friction stir spot welding. https://app.cochat.ai/papers/10.1016/j.jmrt.2023.05.155
- The paper
- Mohd Isa, M. S., Muhamad, M. R., Yusof, F., Yusoff, N., Brytan, Z., Suga, T., Morisada, Y., & Fujii, H. (2023). Improved mechanical and electrical properties of copper-aluminum joints with highly aligned graphene reinforcement via friction stir spot welding. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2023.05.155
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
