The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7: A novel high-entropy ceramic with low thermal conductivity and sluggish grain growth rate
Abstract
Abstract Fine grains and slow grain growth rate are beneficial to preventing the thermal stress-induced cracking and thermal conductivity increase of thermal barrier coatings. Inspired by the sluggish diffusion effect of high-entropy materials, a novel high-entropy (HE) rare-earth zirconate solid solution (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 was designed and successfully synthesized in this work. The as-synthesized (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 is phase-pure with homogeneous rare-earth element distribution. The thermal conductivity of as-synthesized (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 at room temperature is as low as 0.76 W m-1 K-1. Moreover, after being heated at 1500 °C for 1–18 h, the average grain size of (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 only increases from 1.69 μm to 3.92 μm, while the average grain size of La2Zr2O7 increases from 1.96 μm to 8.89 μm. Low thermal conductivity and sluggish grain growth rate indicate that high-entropy (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 is suitable for application as a thermal barrier coating material and it may possess good thermal stress-induced cracking resistance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Thermal Barrier Coatings for Gas-Turbine Engine Applications
Padture, N. P., Gell, M., & Jordan, E. H. (2002) · Science · doi:10.1126/science.1068609 · Cited by 4,882
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
Ceramic materials for thermal barrier coatings
Cao, X., Vaßen, R., & Stoever, D. (2003) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(03)00129-8 · Cited by 2,379
Mechanisms controlling the durability of thermal barrier coatings
Evans, A. G., Mumm, D. R., Hutchinson, J. W., Meier, G. H., & Pettit, F. S. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00020-7 · Cited by 2,339
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
Gild, J., Zhang, Y., Harrington, T., Jiang, S., Hu, T., Quinn, M. C., Mellor, W. M., Zhou, N., Vecchio, K., & Luo, J. (2016) · Scientific Reports · doi:10.1038/srep37946 · Cited by 1,241
Application of Neumann–Kopp rule for the estimation of heat capacity of mixed oxides
Leitner, J., Voňka, P., Sedmidubský, D., & Svoboda, P. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2009.08.002 · Cited by 517
Feng, J., Xiao, B., Wan, C. L., Qu, Z. X., Huang, Z. C., Chen, J. C., Zhou, R., & Pan, W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2010.11.041 · Cited by 391
A five-component entropy-stabilized fluorite oxide
Chen, K., Pei, X., Tang, L., Cheng, H., Li, Z., Li, C., Zhang, X., & An, L. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.04.063 · Cited by 391
Sarkar, A., Loho, C., Velasco, L., Thomas, T., Bhattacharya, S. S., Hahn, H., & Djenadic, R. (2017) · Dalton Transactions · doi:10.1039/c7dt02077e · Cited by 315
High-entropy environmental barrier coating for the ceramic matrix composites
Dong, Y., Ren, K., Lu, Y., Wang, Q., Liu, J., & Wang, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.02.022 · Cited by 286
Phase stability and distortion in high-entropy oxides
Anand, G., Wynn, A. P., Handley, C. M., & Freeman, C. L. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.12.037 · Cited by 285
A high entropy silicide by reactive spark plasma sintering
Qin, Y., Liu, J.-X., Li, F., Wei, X., Wu, H., & Zhang, G.-J. (2019) · Journal of Advanced Ceramics · doi:10.1007/s40145-019-0319-3 · Cited by 285
High porosity and low thermal conductivity high entropy (Zr0.2Hf0.2Ti0.2Nb0.2Ta0.2)C
Chen, H., Xiang, H., Dai, F., Liu, J., Lei, Y., Zhang, J., & Zhou, Y. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.04.006 · Cited by 248
Self-citationThermal properties of single-phase Y2SiO5
Sun, Z., Li, M., & Zhou, Y. (2009) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.07.026 · Cited by 181
Self-citationInvestigation of the thermal conductivity of selected compounds of lanthanum, samarium and europium
Suresh, G., Seenivasan, G., Krishnaiah, M. V., & Murti, P. S. R. (1998) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(97)00629-4 · Cited by 91
Zhao, Z., Xiang, H., Dai, F., Peng, Z., & Zhou, Y. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.05.030 · Cited by 88
Self-citationZhou, Y., Xiang, H., & Feng, Z. (2014) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2014.06.007 · Cited by 77
Self-citationThermal properties of a prospective thermal barrier material: Yb3Al5O12
Wang, X., Xiang, H., Sun, X. Y., Liu, J., Hou, F., & Zhou, Y. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.319 · Cited by 70
Self-citationStandard Enthalpy of Formation of Lanthanum Zirconate
Bolech, M., Cordfunke, E. H. P., Janssen, F. J. J. G., & Navrotsky, A. (1995) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1995.tb08651.x · Cited by 37
Cited by
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
Self-citationHigh-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
High-entropy enhanced capacitive energy storage
Yang, B., Zhang, Y., Pan, H., Si, W., Zhang, Q., Shen, Z., Yu, Y., Lan, S., Meng, F., Liu, Y., et al. (2022) · Nature Materials · doi:10.1038/s41563-022-01274-6 · Cited by 615
High entropy oxides-exploring a paradigm of promising catalysts: A review
Albedwawi, S. H., AlJaberi, A., Haidemenopoulos, G. N., & Polychronopoulou, K. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109534 · Cited by 343
Metadata
- Authors
- Zhao, Z., Xiang, H., Dai, F.-Z., Peng, Z., & Zhou, Y.
- Venue
- Journal of Materials Science & Technology
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 35
- Issue
- 11
- Pages
- 2647-2651
- ISSN
- 1005-0302 (ISSN-L)
- OpenAlex
- W2950649045
- Cited by
- 448
- References
- 22
- FWCI
- 28.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.