The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Welding defects detection based on deep learning with multiple optical sensors during disk laser welding of thick plates
Abstract
Abstract A multi-sensor system, including an auxiliary illumination (AI) visual sensor system, an UVV band visual sensor system, a spectrometer, and two photodiodes, is established to capture signals of the welding status during high-power disk laser welding. The features of visible light and reflected laser light signal were extracted by decomposing the originally captured signals into different frequency bands by wavelet packet decomposition method (WPD). The captured signal of the spectrometer mainly covers the optical wavelength from 400 nm to 900 nm, which was divided into 25 sub-bands to extract the spectrum features of the spectrometer signal by statistical methods. The features of the plume are acquired by the UVV band visual sensor system, and the features of keyhole are extracted captured from the images captured by AI visual sensor system through the digital image processing method. Based on these quantified real-time features of the welding process, a deep learning algorithm based on convolutional neural network (CNN) was developed to detect three different welding defects during high-power disk laser welding. The established deep learning model is compared with the backpropagation neural network (BP) model, and it shows higher accuracy and robustness in detecting welding defects with the multi-sensor system. Its effectiveness was also validated by four welding experiments with different welding parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hinton, G., Deng, L., Yu, D., Dahl, G., Mohamed, A.-R., Jaitly, N., Senior, A., Vanhoucke, V., Nguyen, P., Sainath, T., et al. (2012) · IEEE Signal Processing Magazine · doi:10.1109/msp.2012.2205597 · Cited by 10,260
Deep learning for decentralized parking lot occupancy detection
Amato, G., Carrara, F., Falchi, F., Gennaro, C., Meghini, C., & Vairo, C. (2017) · Expert Systems with Applications · doi:10.1016/j.eswa.2016.10.055 · Cited by 397
Cited by
Automated defect inspection system for metal surfaces based on deep learning and data augmentation
Yun, J. P., Shin, W. C., Koo, G., Kim, M. S., Lee, C., & Lee, S. J. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.03.009 · Cited by 268
A Review on Recent Advances in Vision-based Defect Recognition towards Industrial Intelligence
Gao, Y., Li, X., Wang, X. V., Wang, L., & Gao, L. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.008 · Cited by 253
Metadata
- Authors
- Zhang, Y., You, D., Gao, X., Zhang, N., & Gao, P. P.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 51
- Pages
- 87-94
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W2941542910
- Cited by
- 164
- References
- 2
- FWCI
- 13.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Welding defects detection based on deep learning with multiple optical sensors during disk laser welding of thick plates. https://app.cochat.ai/papers/10.1016/j.jmsy.2019.02.004
- The paper
- Zhang, Y., You, D., Gao, X., Zhang, N., & Gao, P. P. (2019). Welding defects detection based on deep learning with multiple optical sensors during disk laser welding of thick plates. Journal of Manufacturing Systems. https://doi.org/10.1016/j.jmsy.2019.02.004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.