Using augmented reality to build digital twin for reconfigurable additive manufacturing system
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The extrusion-based additive manufacturing (AM) processes are those where one or multiple tools (usually nozzles) are driven along predefined paths to deposit fabrication materials. They are usually inherently slow because solid contours have to be filled with mere single deposition lines of material. An intuitive way to improve the fabrication speed is to introduce multiple independent actuators for concurrent deposition of materials without collision among them. In this paper, a methodology of using augmented reality (AR) technique is presented to conveniently communicate the layout information between a reconfigurable AM system made of robotic arms and its corresponding digital twin for toolpath planning and simulation. A prototype system made of two desktops AM robotic arms is developed, and transformation matrices are derived to determine the spatial relation between different items in the system, including camera, markers, robotic arms and part substrate. Case studies are conducted to demonstrate the capability of this methodology in automatically retrieving layout information and assisting users to deploy pre-determined layout. The results show that the developed methodology enables rapid retrieval of position information from the physical system layout into the digital twin simulation and optimization and facilitates convenient deployment of an optimized layout determined in the digital twin into the physical system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Cited by
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
Applications of Digital Twin across Industries: A Review
Singh, M., Srivastava, R., Fuenmayor, E., Kuts, V., Qiao, Y., Murray, N., & Devine, D. (2022) · Applied Sciences · doi:10.3390/app12115727 · Cited by 355
Perno, M., Hvam, L., & Haug, A. (2022) · Computers in Industry · doi:10.1016/j.compind.2021.103558 · Cited by 300
Yin, Y., Zheng, P., Li, C., & Wang, L. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102515 · Cited by 271
Metadata
- Authors
- Cai, Y., Wang, Y., & Burnett, M.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 56
- Pages
- 598-604
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3022802752
- Cited by
- 117
- References
- 1
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.