The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Digital Twin Enhanced Dynamic Job-Shop Scheduling
Abstract
Abstract For dynamic scheduling, which is daily decision-making in a job-shop, machine availability prediction, disturbance detection and performance evaluation are always common bottlenecks. Previous research efforts on addressing the bottlenecks primarily emphasize on the analysis of data from the physical job-shop, but with little connection and convergence with its virtual models and simulated data. By introducing digital twin (DT), further convergence between physical and virtual spaces of the job-shop can be achieved, which greatly enables dynamic scheduling. DT fuses both real and simulated data to provide more information for the prediction of machine availability on one hand; and on the other hand, it helps to detect disturbances through comparing the physical machine with its continuously updated digital counterpart in real time, triggering timely rescheduling when needed. It also enables comprehensive performance evaluation for rescheduling using multiple-dimension models, which can describe geometric properties, physics parameters and behaviors of the machines. In the paper, a five-dimension DT for a machine in the job-shop is introduced first, then the DT-based machine availability prediction, disturbance detection and performance evaluation methods are explored. Based on this, a DT-enhanced dynamic scheduling methodology is proposed. A scheduling process of making hydraulic valves in a machining job-shop is taken as a case study to illustrate the effectiveness and advantages of the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871
Self-citationDigital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397
Self-citationA survey of dynamic scheduling in manufacturing systems
Ouelhadj, D., & Petrović, S. (2008) · Journal of Scheduling · doi:10.1007/s10951-008-0090-8 · Cited by 1,031
Digital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000
Self-citationTao, F., & Qi, Q. (2019) · Nature · doi:10.1038/d41586-019-02849-1 · Cited by 799
Zhuang, C., Liu, J., & Xiong, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1617-6 · Cited by 693
Experimentable Digital Twins—Streamlining Simulation-Based Systems Engineering for Industry 4.0
Schluse, M., Priggemeyer, M., Atorf, L., & Rossmann, J. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2804917 · Cited by 524
Digital Twin Driven Smart Manufacturing
(2019) · Elsevier eBooks · doi:10.1016/c2018-0-02206-9 · Cited by 274
Urbina Coronado, P. D., Lynn, R., Louhichi, W., Parto, M., Wescoat, E., & Kurfess, T. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.02.002 · Cited by 267
Resource virtualization: A core technology for developing cyber-physical production systems
Lu, Y., & Xu, X. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.05.003 · Cited by 179
Big data analytics based fault prediction for shop floor scheduling
Ji, W., & Wang, L. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.03.008 · Cited by 170
Cloud-based adaptive process planning considering availability and capabilities of machine tools
Mourtzis, D., Vlachou, E., Xanthopoulos, N., Givehchi, M., & Wang, L. (2016) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2016.01.003 · Cited by 115
Solving the flexible job shop scheduling problem using an improved Jaya algorithm
Caldeira, R. H., & Gnanavelbabu, A. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106064 · Cited by 104
Chen, X., An, Y., Zhang, Z., & Li, Y. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.12.004 · Cited by 102
Kan, C., Yang, H. Y., & Kumara, S. R. T. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.010 · Cited by 89
Joo, C. M., & Kim, B. S. (2015) · Computers & Industrial Engineering · doi:10.1016/j.cie.2015.02.029 · Cited by 88
Zhang, Y., Huang, G. Q., Sun, S., & Yang, T. (2014) · Computers & Industrial Engineering · doi:10.1016/j.cie.2014.07.011 · Cited by 87
Fog computing and convolutional neural network enabled prognosis for machining process optimization
Liang, Y., Li, W., Lu, X. B., & Wang, S. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.05.003 · Cited by 74
Wang, C., & Jiang, P. (2016) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-016-1194-1 · Cited by 57
An overview of function block enabled adaptive process planning for machining
Wang, L. (2014) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2014.11.013 · Cited by 56
Cited by
Rathore, M. M., Shah, S. A., Shukla, D., Bentafat, E., & Bakiras, S. (2021) · IEEE Access · doi:10.1109/access.2021.3060863 · Cited by 616
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
A survey on AI-driven digital twins in Industry 4.0: smart manufacturing and advanced robotics
Huang, Z., Shen, Y., Li, J., Fey, M., & Brecher, C. (2021) · Sensors · doi:10.3390/s21196340 · Cited by 418
Zhang, Y., Zhu, H., Tang, D., Zhou, T., & Gui, Y. (2022) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102412 · Cited by 259
Sparse attention-driven quality prediction for production process optimization in digital twins
Yin, Y., Wang, L., Thai Hoang, D., Wang, W., & Niyato, D. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3448256 · Cited by 14
“In [17], data from physical and virtual entities are integrated, and the DT is utilized to fuse both real and simulated data and offer more comprehensive information about machine availability prediction and disturbance detection.”
Method
Metadata
- Authors
- Zhang, M., Tao, F., & Nee, A. Y. C.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 58
- Pages
- 146-156
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3021726999
- Cited by
- 337
- References
- 20
- FWCI
- 28.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.