The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Digital twin-based designing of the configuration, motion, control, and optimization model of a flow-type smart manufacturing system
Abstract
Abstract Digital twins can achieve hardware-in-the-loop simulation of both physical equipment and cyber model, which could be used to avoid the considerable cost of manufacturing system reconfiguration if the design deficiencies are found in the deployment process of the traditional irreversible design approach. Based on the digital twin technology, a quad-play CMCO (i.e., Configuration design-Motion planning-Control development-Optimization decoupling) design architecture is put forward for the design of the flow-type smart manufacturing system in the Industry 4.0 context. The iteration logic of the CMCO design model is expounded. Two key enabling technologies for enabling the customized and software-defined design of flow-type smart manufacturing systems are presented, including the generalized encapsulation of the quad-play CMCO model and the digital twin technique. A prototype of a digital twin-based manufacturing system design platform, named Digital Twin System, is presented based on the CMCO model. The digital twin-based design platform is verified with a case study of the hollow glass smart manufacturing system. The result shows that the Digital Twin System-based design approach is feasible and efficient.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Self-citationReconfigurable Manufacturing Systems
Koren, Y., Heisel, U., Jovane, F., Moriwaki, T., Pritschow, G., Ulsoy, G., & Van Brussel, H. (1999) · CIRP Annals · doi:10.1016/s0007-8506(07)63232-6 · Cited by 2,034
Data-driven smart manufacturing
Tao, F., Qi, Q., Liu, A., & Kusiak, A. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.006 · Cited by 1,806
Lu, Y., Liu, C., Wang, K. I.-K., Huang, H., & Xu, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101837 · Cited by 1,624
Enabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305
Digital twin-driven product design framework
Tao, F., Sui, F., Liu, A., Qi, Q., Zhang, M., Song, B., Guo, Z., Lu, S. C.-Y., & Nee, A. Y. C. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1443229 · Cited by 1,187
Digital Twin—The Simulation Aspect
Boschert, S., & Rosen, R. (2016) · Mechatronic Futures · doi:10.1007/978-3-319-32156-1_5 · Cited by 1,158
Design of reconfigurable manufacturing systems
Koren, Y., & Shpitalni, M. (2010) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2011.01.001 · Cited by 780
C2PS: A Digital Twin Architecture Reference Model for the Cloud-Based Cyber-Physical Systems
Alam, K. M., & El Saddik, A. (2017) · IEEE Access · doi:10.1109/access.2017.2657006 · Cited by 741
Cited by
Industry 5.0: Prospect and retrospect
Leng, J., Sha, W., Wang, B., Zheng, P., Zhuang, C., Liu, Q., Wuest, T., Mourtzis, D., & Wang, L. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.09.017 · Cited by 1,300
Self-citationTao, F., Xiao, B., Qi, Q., Cheng, J., & Ji, P. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.06.015 · Cited by 1,255
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
Self-citationLeng, J., Ruan, G., Jiang, P., Xu, K., Liu, Q., Zhou, X., & Liu, C. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110112 · Cited by 506
Self-citationA comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
Metadata
- Authors
- Liu, Q., Leng, J., Yan, D., Zhang, D., Wei, L., Yu, A., Zhao, R., Zhang, H., & Chen, X.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 58
- Pages
- 52-64
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3021321491
- Cited by
- 312
- References
- 30
- FWCI
- 31.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Digital twin-based designing of the configuration, motion, control, and optimization model of a flow-type smart manufacturing system. https://app.cochat.ai/papers/10.1016/j.jmsy.2020.04.012
- The paper
- Liu, Q., Leng, J., Yan, D., Zhang, D., Wei, L., Yu, A., Zhao, R., Zhang, H., & Chen, X. (2021). Digital twin-based designing of the configuration, motion, control, and optimization model of a flow-type smart manufacturing system. Journal of Manufacturing Systems. https://doi.org/10.1016/j.jmsy.2020.04.012
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.