The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
A digital twin-enhanced system for engineering product family design and optimization
Abstract
Abstract Engineering product family design and optimization in complex environments has been a major bottleneck in today’s industrial transformation towards smart manufacturing. Digital twin (DT), as a core part of cyber-physical system (CPS), can provide decision support to enhance engineering product lifecycle management workflows via remote monitoring and control, high-fidelity simulation, and solution generation functionalities. Although many studies have proven DT to be highly suited for industry needs, little has been reported on the product family design and optimization capabilities specifically with context awareness, which could be leaving many enterprises ambivalent on its adoption. To fill this gap, a reusable and transparent DT capable of situational recognition and self-correction is essentially required. This paper develops a generic DT architecture reference model to enable the context-aware product family design optimization process in a cost-effective manner. A case study featuring asset re-/configuration within a dynamic environment is further described to demonstrate its in-context decision-aiding capabilities. The authors hope this study can provide valuable insights to both academia and industry in improving their engineering product family management process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113
Digital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397
Industry 4.0 Concept: Background and Overview
Rojko, A. (2017) · International Journal of Interactive Mobile Technologies (iJIM) · doi:10.3991/ijim.v11i5.7072 · Cited by 1,023
C2PS: A Digital Twin Architecture Reference Model for the Cloud-Based Cyber-Physical Systems
Alam, K. M., & El Saddik, A. (2017) · IEEE Access · doi:10.1109/access.2017.2657006 · Cited by 741
A systematic design approach for service innovation of smart product-service systems
Zheng, P., Lin, T.-J., Chen, C.-H., & Xu, X. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.101 · Cited by 414
Self-citationHe, Y., Guo, J., & Zheng, X. (2018) · IEEE Signal Processing Magazine · doi:10.1109/msp.2018.2842228 · Cited by 255
Digital twin-based process reuse and evaluation approach for smart process planning
Liu, J., Zhou, H., Tian, G., Liu, X., & Jing, X. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2748-5 · Cited by 131
Cited by
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
Digital Twin applications toward Industry 4.0: A Review
Javaid, M., Haleem, A., & Suman, R. (2023) · Cognitive Robotics · doi:10.1016/j.cogr.2023.04.003 · Cited by 421
Toward human-centric smart manufacturing: A human-cyber-physical systems (HCPS) perspective
Wang, B., Zheng, P., Yin, Y., Shih, A., & Wang, L. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.05.005 · Cited by 365
Self-citationPerno, M., Hvam, L., & Haug, A. (2022) · Computers in Industry · doi:10.1016/j.compind.2021.103558 · Cited by 300
Yin, Y., Zheng, P., Li, C., & Wang, L. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102515 · Cited by 271
Self-citation
Metadata
- Authors
- Lim, K. Y. H., Zheng, P., Chen, C.-H., & Huang, L.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 57
- Pages
- 82-93
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3082009754
- Cited by
- 202
- References
- 7
- FWCI
- 19.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A digital twin-enhanced system for engineering product family design and optimization. https://app.cochat.ai/papers/10.1016/j.jmsy.2020.08.011
- The paper
- Lim, K. Y. H., Zheng, P., Chen, C.-H., & Huang, L. (2020). A digital twin-enhanced system for engineering product family design and optimization. Journal of Manufacturing Systems. https://doi.org/10.1016/j.jmsy.2020.08.011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.