The DOI matches its Crossref record.
Continuous monitoring of indoor environmental quality using an Arduino-based data acquisition system
Abstract
Abstract Building performance monitoring could be limited due to the cost and inflexibility of hardware and software platforms for data acquisition. This paper describes a portable continuous measurement toolbox which provides a robust, easily extendable, and low-cost setup for indoor environmental quality (IEQ) monitoring and performance assessment. Various sensors—temperature, relative humidity, illuminance, CO2, VOC, PM2.5, and occupancy—for IEQ performance measurement are included in this toolbox. Arduino Uno boards were connected to the sensors for data acquisition. ZigBee communication protocol was established between an XBee device for each Arduino board and an XBee receiver connected to a computer. The toolbox utilized the open source, agent-based software platform VOLTTRON for data communication and analysis. The data collection system was calibrated against an accurate data acquisition card. Experiments have been conducted using the toolbox for assessing IEQ performance in an open computer lab within a commercial building. Thermal comfort, indoor air quality, and lighting performance have been analyzed based on collected data. The study demonstrated reliability and robustness of the toolbox for continuous monitoring of indoor environmental quality.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Agostinelli, S., Cumo, F., Guidi, G., & Tomazzoli, C. (2021) · Energies · doi:10.3390/en14082338 · Cited by 280
Ali, A. S., Coté, C., Heidarinejad, M., & Stephens, B. (2019) · Sensors · doi:10.3390/s19184017 · Cited by 50
“For example, wireless sensor platforms based on Arduino and / or Raspberry Pi boards have successfully been used to monitor indoor and outdoor environmental quality [6,7,22–26] and building energy use [27].”
MethodMicrogrid management system based on a multi-agent approach: An office building pilot
Gomes, L., Vale, Z., & Corchado, J. M. (2020) · Measurement · doi:10.1016/j.measurement.2019.107427 · Cited by 44
Metadata
- Authors
- Karami, M., McMorrow, G. V., & Wang, L.
- Venue
- Journal of Building Engineering
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 19
- Pages
- 412-419
- ISSN
- 2352-7102 (ISSN-L)
- OpenAlex
- W2800013455
- Cited by
- 158
- References
- 0
- FWCI
- 13.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.