By-products of sawmill industry as raw materials for manufacture of chip-sawdust boards
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The paper investigated the possibility of using sawmill industry by-products, i.e. chips and sawdust as raw materials for the production of building wood-based boards. We prepared three-ply boards with the outer layer made from two types of pine particles (A and B) with different dimensions, and the core layer containing a mixture of chips and sawdust at 70 : 30 or 60 : 40 wt ratio. The boards also featured different core layer (CL) to outer layers (OL) ratio of 70 : 30 or 60 : 40. The study demonstrated that unprocessed by-products of mechanical woodworking in the form of chips and sawdust are valuable raw materials for the production of wood-based boards. Irrespective of CL : OL ratio, the boards with the best properties were those with outer layers made of microparticles larger than the ones used currently in particleboard manufacture and with core layers containing 70% of chips. The highest bending strength, modulus of elasticity and dimensional stability of board was noted for CL : OL ratio of 60 : 40, while the highest internal bond was achieved for CL : OL ratio of 70 : 30. These boards may be used as non-structural elements intended for construction industry and interior decoration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrothermal recycling of waste and performance of the recycled wooden particleboards
Lykidis, C., & Grigoriou, A. (2008) · Waste Management · doi:10.1016/j.wasman.2006.11.016 · Cited by 85
Recycling wood waste from construction and demolition to produce particleboards
Azambuja, R. D. R., Castro, V. G. D., Trianoski, R., & Iwakiri, S. (2018) · Maderas. Ciencia y tecnología · doi:10.4067/s0718-221x2018005041401 · Cited by 61
Cited by
Mycelium-Based Composite: The Future Sustainable Biomaterial
Alemu, D., Tafesse, M., & Mondal, A. K. (2022) · International Journal of Biomaterials · doi:10.1155/2022/8401528 · Cited by 197
Wronka, A., & Kowaluk, G. (2022) · Materials · doi:10.3390/ma15238487 · Cited by 38
“Another example of the use of wood by-products from a sawmill is the production of sawdust particleboard [23].”
BackgroundComposite Panels from Wood Waste: A Detailed Review of Processes, Standards, and Applications
Amarasinghe, I. T., Qian, Y., Gunawardena, T., Mendis, P., & Belleville, B. (2024) · Journal of Composites Science · doi:10.3390/jcs8100417 · Cited by 37
“…such as sawdust for the core and larger chips for the surface layers can improve the mechanical properties of In this study, a higher sawdust percentage in the core layer showed improved thickness swelling (TS) and higher Modulus of Rupture (MOR) and internal bond (IB) values. the panel [93].”
InfluentialA multi-stage cascade use of wood composite boards
LUBKE, H., IHNÁT, V., KUŇA, V., & BALBERČÁK, J. (2020) · Wood Research · doi:10.37763/wr.1336-4561/65.5.843854 · Cited by 19
Metadata
- Authors
- Mirski, R., Dukarska, D., Derkowski, A., Czarnecki, R., & Dziurka, D.
- Venue
- Journal of Building Engineering
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 32
- Pages
- 101460
- ISSN
- 2352-7102 (ISSN-L)
- OpenAlex
- W3022955001
- Cited by
- 48
- References
- 2
- FWCI
- 3.25
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: By-products of sawmill industry as raw materials for manufacture of chip-sawdust boards. https://app.cochat.ai/papers/10.1016/j.jobe.2020.101460
- The paper
- Mirski, R., Dukarska, D., Derkowski, A., Czarnecki, R., & Dziurka, D. (2020). By-products of sawmill industry as raw materials for manufacture of chip-sawdust boards. Journal of Building Engineering. https://doi.org/10.1016/j.jobe.2020.101460
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.