Co-pyrolysis of lignin and polyethylene with the addition of transition metals - Part I: Thermal behavior and kinetics analysis
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In order to realize a promissing disposal of solid wastes, especially for biomass and plastics, and the recovery of high value-added products, lignin (LG) and polyethylene (PE) were co-pyrolyzed with the addition of transition metals. Thermal behavior and kinetics of the mixtures affected by the type of transition metals (0.5 mmol/g Ni, Co, Fe and Mn), the concentration of Ni (0–1 mmol/g Ni), the ratio of LG to PE (4:1-1:4) and heating rate (10–40 °C/min) were investigated according to thermogravimetric analysis (TGA). It is found that the treatment of LG/PE with 0.5 mmol/g Ni, Co, Fe or Mn results in the decrease of the initial decomposition temperature of LG and PE in the mixture by 10–53 °C and 9–18 °C, respectively. According to the difference of weight loss (ΔW), the introduction of Fe and Mn has slight influences on the interaction between LG and PE while a negative effect of PE on the devolatilization of LG in LG/PE can be largely diminished with the involvement of Ni and Co. Kinetic analysis reveals that the pyrolysis of LG and PE can be well fitted by a single first order model reaction while two consecutive first order model reactions are needed to exactly describe the co-pyrolysis of LG/PE with or without transition metals. The E value of LG and PE in the mixture is reduced by 6.11–21.62 kJ/mol and 7.67–50.11 kJ/mol, respectively, when 0.5 mmol/g Ni, Co, Fe or Mn was involved. Moreover, the concentration of Ni, the ratio of LG to PE and the heating rate play important roles on the thermal behavior and kinetics of the co-pyrolysis of LG/PE.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Mahmood, N., Yuan, Z., Schmidt, J., & Xu, C. (. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.037 · Cited by 487
Fan, L., Chen, P., Zhang, Y., Liu, S., Liu, Y., Wang, Y., Dai, L., & Ruan, R. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.11.072 · Cited by 218
Cited by
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
Self-citationNishu, Li, Y., & Liu, R. (2022) · Journal of the Energy Institute · doi:10.1016/j.joei.2022.01.001 · Cited by 66
Ma, C., Xie, S., Kumagai, S., Takahashi, Y., Saito, Y., Kameda, T., & Yoshioka, T. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134030 · Cited by 42
Metadata
- Authors
- Wang, Z., Liu, G., Shen, D., Wu, C., & Gu, S.
- Venue
- Journal of the Energy Institute
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 93
- Issue
- 1
- Pages
- 281-291
- ISSN
- 0144-2600 (ISSN-L)
- 1743-9671
- OpenAlex
- W2921212577
- Cited by
- 45
- References
- 3
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.