The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells
Open accessAbstract
Summary Lightweight and mechanically flexible photovoltaics enable roll-to-roll processing, which improves their potential for low-cost mass production. However, the lack of highly conductive and transparent flexible electrodes still causes reduced efficiency relative to solar cells formed on rigid substrates. Here, we demonstrate an electrode that reduces this performance gap in perovskite solar cells (PSCs) by regulating the phase separation of a conducting polymer network using a fluorosurfactant dopant. This network electrode simultaneously offers high conductivity (>4,000 S/cm), improved transmittance (over 80% from 400 to 900 nm), and high mechanical endurance. PSCs with this electrode achieve stabilized power conversion efficiencies of 19.0% and 10.9% at aperture areas of 0.1 cm 2 and 25 cm 2 , respectively, which is comparable to control devices on rigid substrates. This electrode further shows promise as the top electrode in semi-transparent PSCs, which show a stabilized efficiency of 12.5% at 30.6% average visible transmittance. Each of these cells exhibits strong mechanical stability, retaining 80% at 25 cm 2 , 85% at 0.1 cm 2 , and 90% for semi-transparent devices of their original efficiency after 5,000 bending cycles at a curvature radius of 3 mm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
A highly stretchable, transparent, and conductive polymer
Wang, Y., Zhu, C., Pfattner, R., Yan, H., Jin, L., Chen, S., Molina-Lopez, F., Lissel, F., Liu, J., Rabiah, N. I., et al. (2017) · Science Advances · doi:10.1126/sciadv.1602076 · Cited by 1,442
Self-citationEffective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review
Shi, H., Liu, C., Jiang, Q., & Xu, J. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500017 · Cited by 1,200
Vosgueritchian, M., Lipomi, D. J., & Bao, Z. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101775 · Cited by 1,174
Highly Conductive PEDOT:PSS Nanofibrils Induced by Solution‐Processed Crystallization
Kim, N., Kee, S., Lee, S. H., Lee, B. H., Kahng, Y. H., Jo, Y., Kim, B., & Lee, K. (2014) · Advanced Materials · doi:10.1002/adma.201304611 · Cited by 1,148
Kaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
Jönsson, S. K. M., Birgerson, J., Crispin, X., Greczynski, G., Osikowicz, W., Denier van der Gon, A. W., Salaneck, W. R., & Fahlman, M. (2003) · Synthetic Metals · doi:10.1016/s0379-6779(02)01259-6 · Cited by 758
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Chen, H., Ye, F., Tang, W., He, J., Yin, M., Wang, Y., Xie, F., Bi, E., Yang, X., Grätzel, M., et al. (2017) · Nature · doi:10.1038/nature23877 · Cited by 716
Self-citationHigh-efficiency robust perovskite solar cells on ultrathin flexible substrates
Li, Y., Meng, L., Yang, Y., Xu, G., Hong, Z., Chen, Q., You, J., Li, G., Yang, Y., & Li, Y. (2016) · Nature Communications · doi:10.1038/ncomms10214 · Cited by 680
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells
Kumar, M. H., Yantara, N., Dharani, S., Graetzel, M., Mhaisalkar, S., Boix, P. P., & Mathews, N. (2013) · Chemical Communications · doi:10.1039/c3cc46534a · Cited by 650
Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices
Sun, K., Zhang, S., Li, P., Xia, Y., Zhang, X., Du, D., Isikgor, F. H., & Ouyang, J. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-2895-5 · Cited by 648
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy
Feng, J., Zhu, X., Yang, Z., Zhang, X., Niu, J., Wang, Z., Zuo, S., Priya, S., Liu, S. (., & Yang, D. (2018) · Advanced Materials · doi:10.1002/adma.201801418 · Cited by 484
Highly Efficient Flexible Perovskite Solar Cells Using Solution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Que, M., Xing, Y., Que, W., Niu, C., & Shao, J. (2016) · ACS Nano · doi:10.1021/acsnano.5b08135 · Cited by 476
Yoon, J., Sung, H., Lee, G., Cho, W., Ahn, N., Jung, H. S., & Choi, M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02650h · Cited by 469
Hou, Q., Wu, Y., Zhou, S., Wei, Y., Caro, J., & Wang, H. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201813331 · Cited by 461
Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications
Yang, D., Yang, R., Priya, S., & Liu, S. (. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201809781 · Cited by 461
Progress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Li, J., Dong, Q., Li, N., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602922 · Cited by 422
Highly Efficient Flexible Perovskite Solar Cells UsingSolution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Meidan, Q., Yonglei, X., Que, W., Chunming, N., & Shao, J. (2016) · INDIGO (University of Illinois at Chicago) · doi:10.1021/acsnano.5b08135.s001 · Cited by 340
Wei, D., Ma, F., Wang, R., Dou, S., Cui, P., Huang, H., Ji, J., Jia, E., Jia, X., Sajid, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707583 · Cited by 330
Self-citationUltrahigh electrical conductivity in solution-sheared polymeric transparent films
Worfolk, B. J., Andrews, S. C., Park, S., Reinspach, J., Liu, N., Toney, M. F., Mannsfeld, S. C. B., & Bao, Z. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509958112 · Cited by 319
Novel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Charge‐Carrier Balance for Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells
Chen, K., Hu, Q., Liu, T., Zhao, L., Luo, D., Wu, J., Zhang, Y., Zhang, W., Liu, F., Russell, T. P., et al. (2016) · Advanced Materials · doi:10.1002/adma.201604048 · Cited by 256
Self-citationMechanical Analyses and Structural Design Requirements for Flexible Energy Storage Devices
Mao, L., Meng, Q., Ahmad, A., & Wei, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700535 · Cited by 245
Huang, Z., Hu, X., Liu, C., Tan, L., & Chen, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703061 · Cited by 232
Self-citationEfficient Flexible Solar Cell based on Composition‐Tailored Hybrid Perovskite
Bi, C., Chen, B., Wei, H., DeLuca, S. J., & Huang, J. (2017) · Advanced Materials · doi:10.1002/adma.201605900 · Cited by 220
Jeon, I., Chiba, T., Delacou, C., Guo, Y., Kaskela, A., Reynaud, O., Kauppinen, E. I., Maruyama, S., & Matsuo, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02490 · Cited by 205
Tee, B. C. K., & Ouyang, J. (2018) · Advanced Materials · doi:10.1002/adma.201802560 · Cited by 197
Wearable energy-smart ribbons for synchronous energy harvest and storage
Li, C., Islam, M. M., Moore, J., Sleppy, J., Morrison, C., Konstantinov, K., Dou, S. X., Renduchintala, C., & Thomas, J. (2016) · Nature Communications · doi:10.1038/ncomms13319 · Cited by 195
Wearable Large‐Scale Perovskite Solar‐Power Source via Nanocellular Scaffold
Hu, X., Huang, Z., Zhou, X., Li, P., Wang, Y., Huang, Z., Su, M., Ren, W., Li, F., Li, M., et al. (2017) · Advanced Materials · doi:10.1002/adma.201703236 · Cited by 188
Self-citationWang, C., Guan, L., Zhao, D., Yu, Y., Grice, C. R., Song, Z., Awni, R. A., Chen, J., Wang, J., Zhao, X., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00644 · Cited by 184
Hu, X., Huang, Z., Li, F., Su, M., Huang, Z., Zhao, Z., Cai, Z., Yang, X., Meng, X., Li, P., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01799a · Cited by 157
Self-citationYu, J., Wang, M., & Lin, S. (2016) · ACS Nano · doi:10.1021/acsnano.6b05913 · Cited by 110
Zhang, Y., Wu, Z., Li, P., Ono, L. K., Qi, Y., Zhou, J., Shen, H. C., Surya, C. C., & Zheng, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701569 · Cited by 103
Self-citationWang, K., Shi, Y., Gao, L., Chi, R., Shi, K., Guo, B., Zhao, L., & Ma, T. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.11.054 · Cited by 92
Lu, H., Sun, J., Zhang, H., Lu, S., & Choy, W. C. H. (2016) · Nanoscale · doi:10.1039/c6nr00011h · Cited by 87
Flexible and Stretchable Perovskite Solar Cells: Device Design and Development Methods
Wu, Z., Li, P., Zhang, Y., & Zheng, Z. (2018) · Small Methods · doi:10.1002/smtd.201800031 · Cited by 87
Self-citationChen, L., Xie, X., Liu, Z., & Lee, E. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10588b · Cited by 68
Green Anti-solvent Processed Efficient Flexible Perovskite Solar Cells
Xin, D., Wang, Z., Zhang, M., Zheng, X., Qin, Y., Zhu, J., & Zhang, W. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06190 · Cited by 37
Cited by
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Solvent Engineering of the Precursor Solution toward Large‐Area Production of Perovskite Solar Cells
Chao, L., Niu, T., Gao, W., Ran, C., Song, L., Chen, Y., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202005410 · Cited by 354
Self-citationPrintable Smart Materials and Devices: Strategies and Applications
Su, M., & Song, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00303 · Cited by 312
Self-citationBio-inspired vertebral design for scalable and flexible perovskite solar cells
Meng, X., Cai, Z., Zhang, Y., Hu, X., Xing, Z., Huang, Z., Huang, Z., Cui, Y., Hu, T., Su, M., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16831-3 · Cited by 272
Self-citationSolution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Self-citation
Metadata
- Authors
- Hu, X., Meng, X., Zhang, L., Zhang, Y., Cai, Z., Huang, Z., Su, M., Wang, Y., Li, M., Li, F., Yao, X., Wang, F., Ma, W., Chen, Y., & Song, Y.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 3
- Issue
- 9
- Pages
- 2205-2218
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2955811341
- Cited by
- 267
- References
- 41
- FWCI
- 11.72
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.