The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A modeled perovskite solar cell structure with a Cu2O hole-transporting layer enabling over 20% efficiency by low-cost low-temperature processing
Abstract
We introduce Cu2O as a hole-transporting material in perovskite solar cells. Device modeling with a configuration of glass/fluorine-doped tin oxide/ZnO/perovskite/Cu2O/carbon was performed by SCAPS, a solar cell capacitance simulator. The simulation results indicate that the device performance is greatly dependent on the defect densities and thickness of the perovskite absorber. An absorber thickness of 500 nm was optimum for efficient light absorption. The defect states at the perovskite/ZnO interface had a stronger influence on solar cell performance than those at the Cu2O/perovskite interface; therefore, to further improve photovoltaic performance, we should pay particular attention to the perovskite/ZnO interface. Proper interface modification and passivation to lower defect densities of the interface below 1016 cm−3 was essential. The impact of acceptor density and hole mobility of the hole-transport layer on device performance further confirmed that Cu2O is a suitable hole-transport layer for perovskite solar cells. Finally, to achieve better photovoltaic performance, a back-contact material with a high work function is very necessary.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Cited by
Device simulation of highly efficient eco-friendly CH3NH3SnI3 perovskite solar cell
Patel, P. K. (2021) · Scientific Reports · doi:10.1038/s41598-021-82817-w · Cited by 333
Hossain, M. K., Samajdar, D. P., Das, R. C., Arnab, A. A., Rahman, M. F., Rubel, M. H. K., Islam, M. R., Bencherif, H., Pandey, R., Madan, J., et al. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00181 · Cited by 305
Metadata
- Authors
- Lin, L., Jiang, L., Li, P., Fan, B., & Qiu, Y.
- Venue
- Journal of Physics and Chemistry of Solids
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 124
- Pages
- 205-211
- ISSN
- 0022-3697 (ISSN-L)
- OpenAlex
- W2891042963
- Cited by
- 214
- References
- 1
- FWCI
- 3.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A modeled perovskite solar cell structure with a Cu2O hole-transporting layer enabling over 20% efficiency by low-cost low-temperature processing. https://app.cochat.ai/papers/10.1016/j.jpcs.2018.09.024
- The paper
- Lin, L., Jiang, L., Li, P., Fan, B., & Qiu, Y. (2019). A modeled perovskite solar cell structure with a Cu2O hole-transporting layer enabling over 20% efficiency by low-cost low-temperature processing. Journal of Physics and Chemistry of Solids. https://doi.org/10.1016/j.jpcs.2018.09.024
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.