The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Real-time stress measurements in lithium-ion battery negative-electrodes
Open accessAbstract
Abstract Real-time stress evolution in a graphite-based lithium-ion battery negative electrode during electrolyte wetting and electrochemical cycling is measured through wafer-curvature method. Upon electrolyte addition, the composite electrode develops compressive stress of 1–2 MPa due to binder swelling. During electrochemical intercalation, the compressive stress increases with the electrode's state-of-charge, reaching a maximum value of 10–12 MPa. There appears to be an approximate correlation between the rate of stress rise and the staging behavior of the lithiated graphite. De-intercalation results in a similar decrease in electrode stress. Although higher peak stresses are seen at high C-rates, the dependence appears to be relatively weak (up to 5C). These measurements reveal, for the first time, the nature of stress evolution in practical lithium ion- battery electrodes and provide useful data to quantify the driving force for mechanical damage that accrues in composite electrodes upon repeated cycling. While the reported results can serve as reference for calibrating theoretical and computational models to predict electrode stress and damage evolution, the methodology demonstrated can be used to measure stresses and characterize fatigue damage in any composite lithium-ion-battery electrode as well as optimize its microstructure to mitigate stress-related damage mechanisms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Stress generation and fracture in lithium insertion materials
Christensen, J., & Newman, J. (2006) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-006-0095-1 · Cited by 727
Cited by
Calendar and cycle life study of Li(NiMnCo)O2-based 18650 lithium-ion batteries
Ecker, M., Nieto, N., Käbitz, S., Schmalstieg, J., Blanke, H., Warnecke, A., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.143 · Cited by 782
Deformation and stress in electrode materials for Li-ion batteries
Mukhopadhyay, A., & Sheldon, B. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.02.001 · Cited by 724
Li, J., Adewuyi, K., Lotfi, N., Landers, R. G., & Park, J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.011 · Cited by 623
Battery cycle life prediction with coupled chemical degradation and fatigue mechanics
Deshpande, R., Verbrugge, M., Cheng, Y.-T., Wang, J., & Liu, P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.049210jes · Cited by 389
Laresgoiti, I., Käbitz, S., Ecker, M., & Sauer, D. U. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.033 · Cited by 377
Metadata
- Authors
- Sethuraman, V. A., Van Winkle, N., Abraham, D. P., Bower, A. F., & Guduru, P. R.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2012-05
- Volume
- 206
- Pages
- 334-342
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2128096221
- Cited by
- 219
- References
- 2
- FWCI
- 7.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.