The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Delayed liquid cooling strategy with phase change material to achieve high temperature uniformity of Li-ion battery under high-rate discharge
Abstract
This work aims at achieving high temperature uniformity of large battery modules during high C-rate discharge with a low flowrate fluid. A new scheme of delayed liquid cooling combing phase change material (PCM) and liquid cooling is proposed for a Li-ion battery pack with 40 cylindrical cells. A heatsink is designed and optimized with a numerical model, then a real cooling plate is manufactured and its performance is verified with experiment. The results show the low cooling temperature of liquid could increase the temperature difference of the battery pack and reduce the discharge capacity. Therefore, a high inlet water temperature should be the priority if the battery temperature is within the limit. Compared with traditionally continued cooling, delayed cooling system shows better performance especially under high discharge current up to 4C with a cooling flowrate of 40 L/h. Delayed cooling significantly reduces the temperature difference between batteries and within a battery. Furthermore, this new cooling mode shortens the period of liquid cooling thereby saving the power consumption of the system. This hybrid cooling system can be useful in the design of battery thermal management for the battery used under high-rate discharge during climbing hills or other high-power cases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Battery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
Enabling fast charging – Vehicle considerations
Meintz, A., Zhang, J., Vijayagopal, R., Kreutzer, C., Ahmed, S., Bloom, I., Burnham, A., Carlson, R. B., Dias, F., Dufek, E. J., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.093 · Cited by 190
Cited by
A review on thermal management of lithium-ion batteries for electric vehicles
Zhang, X., Li, Z., Luo, L., Fan, Y., & Du, Z. (2022) · Energy · doi:10.1016/j.energy.2021.121652 · Cited by 1,097
Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132741 · Cited by 813
Immersion cooling for lithium-ion batteries – A review
Roe, C., Feng, X., White, G., Li, R., Wang, H., Rui, X., Li, C., Zhang, F., Null, V., Parkes, M., et al. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231094 · Cited by 590
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Akbarzadeh, M., Jaguemont, J., Kalogiannis, T., Karimi, D., He, J., Jin, L., Xie, P., Van Mierlo, J., & Berecibar, M. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.113862 · Cited by 336
Metadata
- Authors
- Cao, J., Ling, Z., Fang, X., & Zhang, Z.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 450
- Pages
- 227673
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2997116942
- Cited by
- 188
- References
- 2
- FWCI
- 8.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.