Voltage losses in zero-gap alkaline water electrolysis
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Reducing the gap between the electrodes and diaphragm to zero is an often adopted strategy to reduce the ohmic drop in alkaline water electrolyzers for hydrogen production. We provide a thorough account of the current–voltage relationship in such a zero-gap configuration over a wide range of electrolyte concentrations and current densities. Included are voltage components that are not often experimentally quantified like those due to bubbles, hydroxide depletion, and dissolved hydrogen and oxygen. As is commonly found for zero-gap configurations, the ohmic resistance was substantially larger than that of the separator. We find that this is because the relatively flat electrode area facing the diaphragm was not active, likely due to separator pore blockage by gas, the electrode itself, and or solid deposits. Over an e-folding time-scale of ten seconds, an additional ohmic drop was found to arise, likely due to gas bubbles in the electrode holes. For electrolyte concentrations below 0.5 M, an overpotential was observed, associated with local depletion of hydroxide at the anode. Finally, a high supersaturation of hydrogen and oxygen was found to significantly increase the equilibrium potential at elevated current densities. Most of these voltage losses are shown to be easily avoidable by introducing a small 0.2 mm gap, greatly improving the performance compared to zero-gap.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent progress in alkaline water electrolysis for hydrogen production and applications
Zeng, K., & Zhang, D. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.002 · Cited by 3,611
Recent Advances and Prospective in Ruthenium-Based Materials for Electrochemical Water Splitting
Yu, J., He, Q., Yang, G., Zhou, W., Shao, Z., & Ni, M. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b02457 · Cited by 789
GILLIAM, R., GRAYDON, J., KIRK, D., & THORPE, S. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.10.062 · Cited by 702
Superwetting Electrodes for Gas-Involving Electrocatalysis
Xu, W., Lu, Z., Sun, X., Jiang, L., & Duan, X. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00070 · Cited by 638 · cited 1×
“Promising alternatives include superaerophobic or superhydrophilic electrodes [46], partially ‘liquid-free’ or ‘single irriguous’ operation [17, 47] or ‘bubble-free’ operation using hydrophobic diffusion layers [25, 48–50].”
BackgroundGas Bubbles in Electrochemical Gas Evolution Reactions
Zhao, X., Ren, H., & Luo, L. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00119 · Cited by 457
Cited by
A high-performance capillary-fed electrolysis cell promises more cost-competitive renewable hydrogen
Hodges, A., Hoang, A. L., Tsekouras, G., Wagner, K., Lee, C.-Y., Swiegers, G. F., & Wallace, G. G. (2022) · Nature Communications · doi:10.1038/s41467-022-28953-x · Cited by 334
A comprehensive review of alkaline water electrolysis mathematical modeling
Hu, S., Guo, B., Ding, S., Yang, F., Dang, J., Liu, B., Gu, J., Ma, J., & Ouyang, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.120099 · Cited by 253
Metal Electrocatalysts for Hydrogen Production in Water Splitting
Kazemi, A., Manteghi, F., & Tehrani, Z. (2024) · ACS Omega · doi:10.1021/acsomega.3c07911 · Cited by 167
Metadata
- Authors
- Haverkort, J. W., & Rajaei, H.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 497
- Pages
- 229864
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W3154939492
- Cited by
- 168
- References
- 5
- FWCI
- 3.92
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Voltage losses in zero-gap alkaline water electrolysis. https://app.cochat.ai/papers/10.1016/j.jpowsour.2021.229864
- The paper
- Haverkort, J. W., & Rajaei, H. (2021). Voltage losses in zero-gap alkaline water electrolysis. Journal of Power Sources. https://doi.org/10.1016/j.jpowsour.2021.229864
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.