The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Phase-change heat transfer in a cavity heated from below: The effect of utilizing single or hybrid nanoparticles as additives
Abstract
Abstract The present study deals with the effects of hybrid nanoparticles on the melting process of a nano-enhanced phase-change material (NEPCM) inside an enclosure. The bottom side of the cavity is isothermal at a hot temperature while the top wall is isothermal at a cold temperature and the left and right walls are insulated. The governing partial differential equations are first non-dimensional form and then solved using the Galerkin finite element method. Some of the dimensionless parameters are kept constant such as the Prandtl number, the Rayleigh number, the Stefan number and the ratio between the thermal diffusivity of the solid and liquid phases while the volume fraction of nanoparticles, the conductivity and viscosity parameters, and the Fourier number are altered. It is found out that increasing the values of the nanoparticles volume fraction, viscosity and conductivity parameters leads to significant variations in the solid-liquid interface for large values of Fourier number. Moreover, increasing the conductivity parameter and decreasing the viscosity parameter at the same time can cause an augmentation in the liquid fraction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Tiari, S., Qiu, S., & Mahdavi, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.053 · Cited by 296
Tiari, S., Qiu, S., & Mahdavi, M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.025 · Cited by 150
Cited by
Numerical simulation for solidification in a LHTESS by means of nano-enhanced PCM
Sheikholeslami, M. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.03.013 · Cited by 423
Experimental study of a latent heat thermal energy storage system assisted by a heat pipe network
Tiari, S., Mahdavi, M., & Qiu, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.019 · Cited by 80
Metadata
- Authors
- Ghalambaz, M., Doostani, A., Izadpanahi, E., & Chamkha, A. J.
- Venue
- Journal of the Taiwan Institute of Chemical Engineers
- Publisher
- Elsevier BV
- Published
- 2017-03
- Volume
- 72
- Pages
- 104-115
- ISSN
- 1876-1070 (ISSN-L)
- OpenAlex
- W2586119625
- Cited by
- 173
- References
- 3
- FWCI
- 22.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Phase-change heat transfer in a cavity heated from below: The effect of utilizing single or hybrid nanoparticles as additives. https://app.cochat.ai/papers/10.1016/j.jtice.2017.01.010
- The paper
- Ghalambaz, M., Doostani, A., Izadpanahi, E., & Chamkha, A. J. (2017). Phase-change heat transfer in a cavity heated from below: The effect of utilizing single or hybrid nanoparticles as additives. Journal of the Taiwan Institute of Chemical Engineers. https://doi.org/10.1016/j.jtice.2017.01.010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.