The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effect of activating agents for producing activated carbon using a facile one-step synthesis with waste coffee grounds for symmetric supercapacitors
Abstract
Abstract Activated carbon with large surface area, high porosity and low-cost features is widely applied as the energy storage material for supercapacitors. Activating agent is significant in activation process since the active sites amount and pore structures of activated carbon are mainly determined by activating agents. In this work, a novel one-step activating process combining the conventional carbonization and activation processes is proposed, and the activating agents of KOH, NaOH, HCl, H3PO4, ZnCl2 and FeCl3 are applied for producing activated carbon from cost-free waste coffee grounds. The surface area, pore structure, functional groups, and defect to graphene ratio of activated carbon are investigated. The KOH-activated carbon electrode shows the highest specific capacitance of 105.3 F/g, which is five-fold of that for the commercial activated carbon electrode (21.8 F/g), owing to the less hydrophobic functional groups, moderate defect to graphene ratio, large specific surface area and high porisity for the former case. The symmetric supercapacitor with the KOH-activated carbon electrode shows a specific capacitance of 19.28 F/g and the maximum energy density of 6.94 Wh/kg at the power density of 350 W/kg. The specific capacitance retention of 133% and Coulombic efficiency of higher than 80% are also attained in the 8000 times charging/discharging process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Converting Corncob to Activated Porous Carbon for Supercapacitor Application
Yang, S., & Zhang, K. (2018) · Nanomaterials · doi:10.3390/nano8040181 · Cited by 91
Cited by
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Lobato-Peralta, D. R., Duque-Brito, E., Villafán-Vidales, H. I., Longoria, A., Sebastian, P. J., Cuentas-Gallegos, A. K., Arancibia-Bulnes, C. A., & Okoye, P. U. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126123 · Cited by 273
Metadata
- Authors
- Chiu, Y.-H., & Lin, L.-Y.
- Venue
- Journal of the Taiwan Institute of Chemical Engineers
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 101
- Pages
- 177-185
- ISSN
- 1876-1070 (ISSN-L)
- OpenAlex
- W2945194647
- Cited by
- 218
- References
- 1
- FWCI
- 8.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.