The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Numerical simulation of rime ice on NREL Phase VI blade
Abstract
Abstract Wind turbine installation in cold regions is prone to icing events. In this study, rime ice on the rotating NREL Phase VI blade is simulated. First, an icing model is developed and validated to gain a better understanding of blade icing. For the fixed airfoil, the root-mean-square error of the collection efficiency is 8.6%. The ice shape area error is 1.5%. For the rotating blade, the ice shape area error is 2.4%. The validation results indicate that the accuracy of the icing model is satisfactory. Second, rime ice on the NREL Phase VI blade is examined. The results suggest that ice mainly accretes on the blade leading edge. The ice thickness gradually increases along the radial direction. The maximum ice thickness can reach 7.7 cm. Finally, ice mass and power degeneration distributions are investigated. The results indicate that ice mass increases along the radial direction. The increase in the ice mass is up to 105.3%. The power mainly degenerates at the outer blade. The decrease in the power is up to 13.3%. With respect to anti/de-icing, increased attention should be focused on the outer blade.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Frost accumu lated on the blades of a wind turbine deteriorates its aerodynamic per formance and reduces its power generation capacity [7].”
From Frosting mechanism and behaviors on surfaces with simple geometries: A state-of-the-art literature review (2022) · cites this paper as [7]
Citations
Cites
Anti-icing and de-icing techniques for wind turbines: Critical review
Parent, O., & Ilinca, A. (2011) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2010.01.005 · Cited by 902
Navier–Stokes predictions of the NREL phase VI rotor in the NASA Ames 80 ft × 120 ft wind tunnel
Sørensen, N. N., Michelsen, J. A., & Schreck, S. (2002) · Wind Energy · doi:10.1002/we.64 · Cited by 348
Navier-Stokes Predictions of the NREL Phase VI Rotor in the NASA Ames 80-By-120 Wind Tunnel
Sørensen, N. N., Michelsen, J. A., & Schreck, S. (2002) · ASME Wind Energy Symposium · doi:10.1115/wind2002-31 · Cited by 254
Hsu, M., Akkerman, I., & Bazilevs, Y. (2013) · Wind Energy · doi:10.1002/we.1599 · Cited by 211
Wind turbine aerodynamic response under atmospheric icing conditions
Etemaddar, M., Hansen, M. O. L., & Moan, T. (2012) · Wind Energy · doi:10.1002/we.1573 · Cited by 131
Scaled ice accretion experiments on a rotating wind turbine blade
Han, Y., Palacios, J. L., & Schmitz, S. (2012) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/j.jweia.2012.06.001 · Cited by 117
Two-dimensional modelling of the ice accretion process on transmission line wires and conductors
Fu, P., Farzaneh, M., & Bouchard, G. (2006) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2006.06.004 · Cited by 115
Performance losses due to ice accretion for a 5 MW wind turbine
Homola, M. C., Virk, M. S., Nicklasson, P. J., & Sundsbø, P. A. (2011) · Wind Energy · doi:10.1002/we.477 · Cited by 113
The Impact of Ice Formation on Wind Turbine Performance and Aerodynamics
Barber, S., Wang, Y., Jafari, S., Chokani, N., & Abhari, R. S. (2011) · Journal of Solar Energy Engineering · doi:10.1115/1.4003187 · Cited by 109
A CFD approach for modeling the rime-ice accretion process on a horizontal-axis wind turbine
Fu, P., & Farzaneh, M. (2009) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/j.jweia.2009.10.014 · Cited by 89
Unstructured Mesh CFD Aerodynamic Analysis of the NREL Phase VI Rotor
Potsdam, M., & Mavriplis, D. J. (2009) · AIAA Aerospace Sciences Meeting · doi:10.2514/6.2009-1221 · Cited by 79
Villalpando, F., Reggio, M., & Ilinca, A. (2016) · Energy · doi:10.1016/j.energy.2016.08.047 · Cited by 75
Wind Turbine Icing and De-Icing
Fortin, G., & Perron, J. (2009) · AIAA Aerospace Sciences Meeting · doi:10.2514/6.2009-274 · Cited by 72
Wind turbines ice distribution and load response under icing conditions
Hu, L., Zhu, X., Hu, C., Chen, J., & Du, Z. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.05.059 · Cited by 72
Self-citationEffect of icing roughness on wind turbine power production
Blasco, P. M., Palacios, J. L., & Schmitz, S. (2016) · Wind Energy · doi:10.1002/we.2026 · Cited by 70
On Icing and Icing Mitigation of Wind Turbine Blades in Cold Climate
Sunden, B. A., & Wu, Z. (2015) · Journal of Energy Resources Technology · doi:10.1115/1.4030352 · Cited by 58
An Eulerian Method to Calculate the Collection Efficiency on two and Three Dimensional Bodies
Wirogo, S., & Srirambhatla, S. (2003) · AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2003-1073 · Cited by 53
An Eulerian approach to supercooled droplets impingement calculations
Bourgault, Y., Habashi, W. G., Dompierre, J., Boutanios, Z., Bartolomeo, W. D., Bourgault, Y., Habashi, W. G., Dompierre, J., Boutanios, Z., & Bartolomeo, W. D. (1997) · AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.1997-176 · Cited by 51
Quasi-Steady Convergence of Multistep Navier–Stokes Icing Simulations
Lashkajani, K. H., Laurendeau, É., & Paraschivoiu, I. (2013) · Journal of Aircraft · doi:10.2514/1.c032197 · Cited by 45
Analysis and Mitigation of Icing Effects on Wind Turbines
Ilinca, A. (2011) · InTech eBooks · doi:10.5772/15484 · Cited by 42
Eulerian Simulations of Icing Collection Efficiency Using a Singularity Diffusion Model
Tong, X., & LUKE, E. A. (2005) · AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-1246 · Cited by 41
FENSAP-ICE Simulation of Icing on Wind Turbine Blades, Part 1: Performance Degradation
Reid, T., Baruzzi, G. S., Ozcer, I. A., Switchenko, D., & Habashi, W. G. (2013) · AIAA Aerospace Sciences Meeting · doi:10.2514/6.2013-750 · Cited by 34
Ice Accretion Modeling Using an Eulerian Approach for Droplet Impingement
Kim, J., Dennis, P., Sankar, L., & Kreeger, R. E. (2013) · AIAA Aerospace Sciences Meeting · doi:10.2514/6.2013-246 · Cited by 23
Calculation of the Water Droplets Local Collection Efficiency on the Wind Turbines Blade
Hu, L., Zhu, X., Hu, C., Chen, J., & Du, Z. (2017) · Journal of Energy Resources Technology · doi:10.1115/1.4036329 · Cited by 15
Self-citationTowards a CFD Model for Prediction of Wind Turbine Power Losses due to Icing in Cold Climate
Pedersen, M. C., & Sørensen, H. (2016) · VBN Forskningsportal (Aalborg Universitet) · Cited by 14
A Finite-Volume Approach to Modeling Ice Accretion
Kinzel, M., Noack, R. W., Sarofeen, C., & Kreeger, R. E. (2010) · AIAA Applied Aerodynamics Conference · doi:10.2514/6.2010-4230 · Cited by 11
In-Cloud Ice Accretion Modeling on Wind Turbine Blades Using an Extended Messinger Model
Sankar, L., & Ali, M. A. (2015) · AIAA International Energy Conversion Engineering Conference (IECEC) · doi:10.2514/6.2015-3715 · Cited by 8
Cited by
Zhang, L., Song, M., Deng, S., Shen, J., & Dang, C. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118984 · Cited by 83
Metadata
- Authors
- Hu, L., Zhu, X., Chen, J., Shen, X., & Du, Z.
- Affiliations
- Shanghai Jiao Tong University (CN)
- Corresponding author
- Zhu, Xiaocheng
- Venue
- Journal of Wind Engineering and Industrial Aerodynamics
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 178
- Pages
- 57-68
- ISSN
- 0167-6105 (ISSN-L)
- OpenAlex
- W2803498273
- Cited by
- 53
- References
- 27
- Citations by year
- 2026: 4 · 2025: 12 · 2024: 7 · 2023: 8 · 2022: 9 · 2021: 6 · 2020: 4 · 2019: 2 · 2018: 1
- FWCI
- 2.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Journal of Wind Engineering and Industrial Aerodynamics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Aerospace Engineering › Icing and De-icing Technologies
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Wind Energy Research and Development
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Particle Dynamics in Fluid Flows
- Keywords
- rime ice, wind turbine blade icing, ice accretion, ice thickness distribution, power degradation, ice mass, anti-icing, de-icing, cold regions
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.