Dye removal using waste beads: Efficient utilization of surface-modified chitosan beads generated after lead adsorption process
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In our earlier reported work we studied the removal of Pb2+ from aqueous media using surfactant-modified chitosan (SMCS) beads. There it was shown that,SMCS beads could be used as an efficient adsorbent (maximum adsorption capacity of 100.0 mg/g) for Pb2+ removal. However, after the removal of lead, the waste sludge (Pb-loaded SMCS beads) disposal becomes a real challenge. To face this problem, we have taken up the strategy to explore the possibility of further utilizing the waste beads for dye removal. Thus waste can serve as a resource. In industrial ecology this is recognized as ‘a closed-loop system’. Although this is an extended part of our previously published earlier work [ 3 ], but seems to be a very fruitful utilization of waste sludge. In the present paper we studied the removal of two model dyes e.g. crystal violet (CV) and tartrazine (TZ) using the waste SMCS beads generated after Pb2+ adsorption. These waste beads are designated as lead-loaded surfactant-modified chitosan (PbL-SMCS) beads. It was interesting to note that, even after adsorption of Pb2+, the SMCS beads were able to remove the dyes effectively. The kinetic studies showed rapid sorption dynamics following pseudo-second order kinetic model. Equilibrium time obtained was 2 h for both the dyes which led to remove 90% of the dyes. Studies on the effect of dose revealed that, 0.9 g/L dose was the optimum to obtain ∼99% removal of CV and TZ at a concentration of 20 mg/L under the optimum pH conditions of 6.0 and 3.0, respectively. Isotherm data were fitted well to the Langmuir and Freundlich isotherm for CV and TZ, respectively. Langmuir adsorption capacity obtained for CV and TZ removal was 97.09 and 30.03 mg/g, respectively. These approaches are important in today’s scenario to help in reducing the waste, and recycling and reusing the adsorbent.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Banerjee, S., & Chattopadhyaya, M. C. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.06.005 · Cited by 791
Cited by
Srivatsav, P., Bhargav, B., Shanmugasundaram, V., Arun, J., Gopinath, K., & Bhatnagar, A. (2020) · Water · doi:10.3390/w12123561 · Cited by 318
Anderson, A., Anbarasu, A., Pasupuleti, R. R., Manigandan, S., Praveenkumar, T. R., & Aravind Kumar, J. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.133724 · Cited by 124
Akhtar, M., Sarfraz, M., Ahmad, M., Raza, N., & Zhang, L. (2025) · Desalination and Water Treatment · doi:10.1016/j.dwt.2024.100914 · Cited by 94
Mashkoor, F., & Nasar, A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.015 · Cited by 80
El Allaoui, B., Chakhtouna, H., Zari, N., Benzeid, H., Qaiss, A. E. K., & Bouhfid, R. (2024) · Cellulose · doi:10.1007/s10570-024-05954-1 · Cited by 18
Metadata
- Authors
- Pal, P., & Pal, A.
- Venue
- Journal of Water Process Engineering
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 31
- Pages
- 100882
- ISSN
- 2214-7144 (ISSN-L)
- OpenAlex
- W2955495898
- Cited by
- 47
- References
- 1
- FWCI
- 2.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dye removal using waste beads: Efficient utilization of surface-modified chitosan beads generated after lead adsorption process. https://app.cochat.ai/papers/10.1016/j.jwpe.2019.100882
- The paper
- Pal, P., & Pal, A. (2019). Dye removal using waste beads: Efficient utilization of surface-modified chitosan beads generated after lead adsorption process. Journal of Water Process Engineering. https://doi.org/10.1016/j.jwpe.2019.100882
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.