The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Thermo-compression of biodegradable thermoplastic corn starch films containing chitin and chitosan
Open accessAbstract
Films based on thermoplastic corn starch (TPS) and chitosan/chitin were obtained by melt-mixing and thermo-compression. Chitosan and chitin incorporation to TPS matrix induced some structural modifications due mainly to the interactions between starch hydroxyl and chitosan/chitin amino groups. Crystallinity degree of TPS films was increased with biopolymers incorporation. Enthalpy melting values for TPS–chitosan/chitin films resulted lower than those corresponding to TPS control ones. Films had homogeneous and smooth surfaces, without pores and cracks and no glycerol migration was evidenced by Scanning Electronic Microscopy. Films fracture surfaces were uniform without the presence of unmelting starch granules neither chitosan/chitin agglomerates. Films with chitosan/chitin presented higher color, UV absorption capacity and opacity than TPS films. Addition of 10 g chitosan or chitin/100 g starch decreased 35 and 56% water vapor permeability, respectively. Biopolymers addition to TPS increased tensile strength and elastic modulus, and decreased elongation at break. Starch and glycerol-rich domains where evidenced in TPS matrixes by Dynamic Mechanical Analysis. Finally, TPS–chitosan films reduced Staphylococcus aureus and Escherichia coli growth in the contact zone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Morphological investigation of nanocomposites from sorbitol plasticized starch and tunicin whiskers
Mathew, A. P., & Dufresne, A. (2002) · Biomacromolecules · doi:10.1021/bm0101769 · Cited by 384
Film blowing of thermoplastic starch
Thunwall, M., Kuthanová, V., Boldizar, A., & Rigdahl, M. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.07.001 · Cited by 169
Cited by
Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging
Muller, J., González-Martínez, C., & Chiralt, A. (2017) · Materials · doi:10.3390/ma10080952 · Cited by 447
Biodegradable polymer blends based on corn starch and thermoplastic chitosan processed by extrusion
Mendes, J. F., Paschoalin, R. T., Carmona, V. B., Sena Neto, A. R., Marques, A. C. P., Marconcini, J. M., Mattoso, L. H. C., Medeiros, E. S., & Oliveira, J. E. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.10.093 · Cited by 416
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Journal of Food Science and Technology · doi:10.1007/s13197-015-2009-7 · Cited by 399
Applications of biodegradable materials in food packaging: A review
Cheng, J., Gao, R., Zhu, Y., & Lin, Q. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.01.080 · Cited by 312
Becoming Sustainable, The New Frontier in Soft Robotics
Hartmann, F., Baumgartner, M., & Kaltenbrunner, M. (2021) · Advanced Materials · doi:10.1002/adma.202004413 · Cited by 281
Metadata
- Authors
- Lopez, O., Garcia, M. A., Villar, M. A., Gentili, A., Rodriguez, M. S., & Albertengo, L.
- Venue
- LWT - Food Science and Technology
- Publisher
- Elsevier BV
- Published
- 2014-06
- Volume
- 57
- Issue
- 1
- Pages
- 106-115
- ISSN
- 0023-6438 (ISSN-L)
- OpenAlex
- W2066734974
- Cited by
- 217
- References
- 2
- FWCI
- 6.30
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.