Impact of selected process parameters on solubility and heat stability of pea protein isolate
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Pea protein isolate (PPI) is considered a promising substitute for commonly used protein ingredients of animal origin. Its application in food industry is limited by lack of scientific knowledge on functional properties including solubility. PPI dispersions adjusted to concentration (4% or 8% w/w protein), pH (6.8 or 7.5) and ionic strength (IS non-adjusted, 50 or 100 mM) were subjected to two industrially applied heat treatments of 140 °C for 4 s (ultra-high temperature, UHT) or 121 °C for 2.8 min. Solubility and heat stability varied depending on pH, IS, protein concentration and heat treatment. Both 4% and 8% PPI dispersions demonstrated high solubility (>97%) at pH 7.5 and IS non-adjusted either non-heated or 121 °C/2.8 min heated conditions. They also showed high heat stability (>92%) after 121 °C/2.8 min treatment. UHT generally resulted in low solubility and heat stability regardless of solution conditions. Treatment at 121 °C/2.8 min mostly formed soluble protein aggregates through covalent (thiol-disulphide) interactions while UHT mainly produced non-soluble aggregates through non-covalent interactions. Manipulation of solution conditions and optimization of heat treatments could be a promising approach to improve solubility and heat stability of pea proteins.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adebiyi, A. P., & Aluko, R. E. (2011) · Food Chemistry · doi:10.1016/j.foodchem.2011.03.116 · Cited by 377
Profile and Functional Properties of Seed Proteins from Six Pea (Pisum sativum) Genotypes
Barac, M., Cabrilo, S., Pesic, M., Stanojevic, S., Zilic, S., Macej, O., & Ristic, N. (2010) · International Journal of Molecular Sciences · doi:10.3390/ijms11124973 · Cited by 368
Mession, J.-L., Sok, N., Assifaoui, A., & Saurel, R. (2013) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf303739n · Cited by 233
Cited by
The Current Situation of Pea Protein and Its Application in the Food Industry
Shanthakumar, P., Klepacka, J., Bains, A., Chawla, P., Dhull, S. B., & Najda, A. (2022) · Molecules · doi:10.3390/molecules27165354 · Cited by 381
Gao, Z., Shen, P., Lan, Y., Cui, L., Ohm, J.-B., Chen, B., & Rao, J. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109045 · Cited by 374
Current insights into protein solubility: A review of its importance for alternative proteins
Grossmann, L., & McClements, D. J. (2023) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.108416 · Cited by 367
Pea protein ingredients: A mainstream ingredient to (re)formulate innovative foods and beverages.
Boukid, F., Rosell, C. M., & Castellari, M. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.02.040 · Cited by 329
Ge, J., Sun, C., Corke, H., Gul, K., Gan, R., & Fang, Y. (2020) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12573 · Cited by 318
“…that compared with unmodified PPI, the solubility of heat-treated PPI with different parameters did not improve but might decrease significantly (Beck, Knoerzer, Sellahewa, Emin, & Arcot, 2017; Chao & Aluko, 2018; Bogahawaththa, Chau, Trivedi, Dissanayake, & Vasiljevic, 2019a; Peng et al., 2016).”
Metadata
- Authors
- Bogahawaththa, D., Bao Chau, N. H., Trivedi, J., Dissanayake, M., & Vasiljevic, T.
- Venue
- LWT
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 102
- Pages
- 246-253
- ISSN
- 0023-6438 (ISSN-L)
- OpenAlex
- W2904173187
- Cited by
- 119
- References
- 3
- FWCI
- 5.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.